Manual Definitive Technology Studio Monitor 45 (page 7 of 12) (English, French, Spanish)

583219

Zoom out

Zoom in

1/12

Connecting Your Loudspeakers

Conexión de las bocinas

Brancher les haut-parleurs

Maintain correct polarity

Note that one of the terminals on each speaker is marked with a red terminal ring (+) and the other is marked with a black

one (–). Make certain that you connect the wire from the red (+) terminal of your amplifier or receiver to the red (+) terminal

on your speaker and the wire from the black (–) terminal of your amplifier or receiver to the black (–) terminal on your speak-

er. Most speaker wire has some indicator (such as color-coding, ribbing or writing) on one of the two conductors to help you

maintain consistency. It is essential to connect all speakers in the system to the amplifier in the same way (in correct polari-

ty). If you experience poor sound, one or more of the channels may be connected in incorrect polarity and needs to be

rewired. Pay close attention and connect positive to positive and negative to negative on all channels.

Mantenga la polaridad correcta.

Verifique que las terminales de cada bocina estén marcadas con etiquetas rojas (+) y negras (-). Asegúrese de conectar el cable

rojo de la terminal (+) de su amplificador o receptor a la terminal en rojo (+) de la bocina; y el cable negro de la terminal (–)

del amplificador o receptor a la terminal en negro (–) de la bocina. La mayoría de los cables de las bocinas cuentan con algún

tipo de indicación (colores, texto o etiquetas), al menos, en uno de los conductores, para ayudarlo a conectarlos

correctamente. Es fundamental conectar todas las bocinas del sistema al amplificador de la misma manera (con la polaridad

correcta). Si no obtiene un buen nivel de sonido, es posible que un canal o varios estén conectados con la polaridad invertida

y deba volver a conectarlos. Preste mucha atención al conectar las terminales (+) y (–) en todos los canales.

Veillez à ce que la polarité des branchements soit correcte.

Notez que l'une des bornes de chaque haut-parleur est repérée par une étiquette rouge (+) et l'autre par une étiquette noire

(–). Veillez à raccorder le fil branché sur la borne rouge (+) de votre ampli à la borne « + » de votre haut-parleur, et le fil branché

sur la borne noire (–) de votre ampli à la borne « – » du haut-parleur. La majorité des câbles différencient les conducteurs

d'une manière ou d'une autre (code couleur, nervure ou inscription) pour vous faciliter la tâche. Il est essentiel de raccorder

tous les haut-parleurs du système à l'amplificateur de la même façon (pour maintenir une polarité correcte). Si vous trouvez

la reproduction sonore médiocre, il se peut qu'un ou plusieurs haut-parleurs soient raccordés avec une polarité inversée et que

leurs branchements doivent être refaits. Veillez à bien raccorder le positif au positif et le négatif au négatif sur toutes les voies.

english

français

español

RECEIVER/

AMPLIFIER

Receiver/Amplifier

Strip 1/4" (6mm) wire.

Identify markings on wir

e and assign +/-.

Ensure that the speaker is always con-

nected to the receiver or amplifier + to +

and – to –.

1. Unscrew binding post and insert wire.

2. Tighten until wire is secure.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Definitive Technology Studio Monitor 45 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Definitive Technology Studio Monitor 45 Manual

Product: