Manual Definitive Technology Mythos STS (page 7 of 15) (English)

582225

Zoom out

Zoom in

1/15

some indicator (such as color-coding, ribbing or writing) on one of the two

conductors to help you maintain consistency. It is essential to connect both

speakers to the ampliﬁer in the same way (in phase). If you experience a lack

of bass, it is likely that one speaker is out of phase with the other and needs to be

rewired paying closer attention to connect positive to positive; negative to negative

on both channels.

To connect wire to the binding post [see ﬁgure above], unscrew the hex nut

and insert the bare wire into the hole near the base of the binding post. Do not

insert the insulated part of the wire into the hole as this will not give you a good

connection. Twist the hex nut back down the binding post until it ﬁrmly meets

the wire. Do not over tighten.

Connecting Mythos STS to a Multi-Channel

Home Theater System

Your Mythos STSs have a set of speaker level (high level) 5-way binding post

speaker inputs to feed in the left and right channel signals plus an LFE input to

separately feed the discrete “Low Frequency Effects” channel into each subwoofer.

Unlike a conventional system, where the subwoofer is driven only by an LFE

subwoofer signal, the Mythos STSs are much more sophisticated and can play

by the left and right channel bass signal as well as the LFE signal. For optimum

performance, please fully read and closely follow the directions in this manual.

To start, strip

inch (12.7mm) of insulation from each of the two conductors

of the speaker wire to expose the bare metal and twist each of the individual

conductors into single unfrayed strands. Connect the left front channel red (+)

terminal of your receiver or ampliﬁer to the red marked (+) terminal of your left

loudspeaker and the left front channel black marked (-) terminal of your receiver or

ampliﬁer to the black (-) terminal of your left loudspeaker. Connect the right

channel main/front channel red (+) terminal of your ampliﬁer or receiver to the red

(+) terminal of your right loudspeaker and the black (-) terminal of the right

main/front channel of your receiver or ampliﬁer to the black (-) terminal of your

right loudspeaker. Most speaker wire has some indicator (such as color-coding,

ribbing or writing) on one of the two conductors to help you maintain consistency. It

is essential to connect both speakers to the ampliﬁer in the same way (in phase). If

you experience a lack of bass, it is likely that one speaker is out of phase with the

other and needs to be rewired paying closer attention to connect positive to positive;

negative to negative on both channels.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Definitive Technology Mythos STS in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Definitive Technology Mythos STS Manual

Product: