Manual Definitive Technology Mythos 10 (page 4 of 11) (English)

582223

Zoom out

Zoom in

1/11

•Multichannel (Dolby Digital & DTS) receivers and processors have a

critical Channel Balancing Procedure for each speaker and the subwoofer

(connected via LFE or “Sub Out” low-level). This balancing procedure

must be followed in order to ensure proper performance from your speak-

ers. See your receiver/processor user’s manual for this information.

•Multichannel (Dolby Digital & DTS) receivers and processors also

have Bass Management Procedures that help direct the correct

frequencies to the correct speakers. Bass Management can vary from

unit to unit. This frequency-setting procedure must be followed in

order to ensure proper performance from your system. See your

receiver/processor user’s manual for this information.

When making Speaker Wire connections, use high quality, large gauge

speaker wire to ensure the best performance. Note that one of the input

terminals on the rear of your loudspeakers is red (+) and the other is black (-).

To ensure correct polarity, make certain that you connect wire from the red

(+) terminal of your receiver to the red (+)

terminal of your loudspeakers, and the

wire from the black (-) terminal of your

receiver to the black (-) terminal of your

loudspeakers. Most speaker wire has

indicator markings on one conductor to

help you maintain consistency. If your

sound seems “thin,” check your

connections for correct polarity.

Channel Balance & Bass Management

Speaker Wire Connections

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Definitive Technology Mythos 10 in the language / languages: English as an attachment in your email.

The manual is 0,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Definitive Technology Mythos 10 Manual

Product: