582226
6
Zoom out
Zoom in
Previous page
1/6
Next page
6 7
Hooking Up Your Mythos Loudspeakers
Your Mythos loudspeakers each have one pair of gold 5-way
binding posts. Normally, you will hook up the left main/front channel
red(+) terminal of your receiver or amplifier to the red(+) terminal of
your left Mythos loudspeaker and the left main/front channel black(-)
terminal of your receiver or amplifier to the black(-) terminal of your
left Mythos loudspeaker. Connect the right channel main/front chan-
nel red(+) terminal of your amplifier or receiver to the red(+)
terminal of your right Mythos loudspeaker and the black(-) terminal
of the right main/front channel of your receiver or amplifier to the
black(-) terminal of your right Mythos loudspeaker.
If you are using the Mythos as side/rear surround speakers, hook
up the left surround red(+) terminal of your receiver or amplifier to
the red(+) terminal of your Mythos left surround speaker and the left
surround black(-) terminal of your receiver or amplifier to the black(-)
terminal of your Mythos left surround speaker. Connect the right
surround red(+) terminal of your amplifier or receiver to the red(+)
terminal of your Mythos right surround loudspeaker and the black(-)
terminal of the right surround channel of your receiver or amplifier
to the black(-) terminal of your Mythos right surround loudspeaker.
If your receiver/ decoder has a bass management system and you
are using a separate subwoofer,set bass management to “Smallleft
and right main speakers, “Smallcenter channel, “Smallsurround
speakers and “Yessubwoofer. If your receiver/decoder has a choice
of crossover frequencies, set the crossover to 80 Hz. If you are not
using a separate subwoofer, set bass management to “Largeleft
and right main speakers, “Largecenter channel and “Large”surround
speakers, and “Nosubwoofer.
Connecting Your Mythos Loudspeakers Setting Bass and Treble Controls on Your
Receiver or Amplifier
Normally we recommend that you set the Bass and Treble controls
on flat or 0 dB. This will give you the most linear and natural sound.
Also, if your amplifier or receiver has a graphic equalizer, we recom-
mend that you leave it flat. The reason for this is that we have spoken
with many consumers about what they thought were improperly
sounding speakers when, in fact, the problem was misadjusted tone
controls. When in doubt, leave them flat; this almost always
sounds the best.
Usually if distortion is heard when the speakers are being driven
at loud levels, it is caused by driving (turning up) the amplifier too
loud and not driving the speakers with more power than they can
handle. Remember, most amplifiers put out their full-rated power
well beforethe volume control is turned all the way up! If your
speakers distort when you play them loud, turn down the amplifi-
er or get a bigger one.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Definitive Technology Mythos 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Definitive Technology Mythos 1 in the language / languages: English as an attachment in your email.

The manual is 0,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info