611040
9
Zoom out
Zoom in
Previous page
1/128
Next page
Dedicated Micros ©2011
9
CamVu D500 Minidome
Installation
The dome camera can be mounted in two ways: ceiling mount for installation into a tile ceiling; surface
mount for installation directly to a hard surface or mounting structure.
Parts Supplied
2 x Plastic anchors
2 x 80 mm (3”) screws
Parts Not Supplied
Optional video service lead (part number DM/ICED-SERV)
Surface Mount Ceiling Mount
Surface Mount Installation
Refer to the Quickstart section for more information.
1 To remove the dome cover, rotate it counter-clockwise and gently pull it away from the camera
body. The inner liner can now be removed.
2 Using the template supplied at the rear of this manual, mark and drill the holes required for
xing. Using the two 80 mm mounting screws, attach the dome camera to the surface as
shown. Do not over tighten the xing screws. The screws can be used on their own if the
surface is of a suitable material (e.g. wood), but plastic anchors must be used where the
surface is of brick or masonry construction. Run the ethernet cable to the camera. Cable may
be fed through the ceiling or through the cutout in the side of the camera shroud. Remove the
cutout with a sharp knife and use a round le to smooth the edges if necessary.
3 Connect the ethernet cable to the RJ45 socket on the mainboard. If the camera is connected
to a switch that is not POE capable, refer to ‘POE Injector Cable‘ and install the POE injector
cable as described.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dedicated Micros CamVu 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dedicated Micros CamVu 500 in the language / languages: English as an attachment in your email.

The manual is 5,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info