Manual De Walt D25701K T-1 (page 31 of 136) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

591286

Zoom out

Zoom in

1/136

ENGLISH

WARNING: To reduce the risk of

serious personal injury, ALWAYS hold

securely in anticipation of a sudden

reaction.

Proper hand position requires one hand on the

side handle (j), with the other hand on the main

handle (m).

Switching On and Off (ﬁ g. 1)

The lock-on button (b) allows the on/off switch (a)

to be locked on in chiselling mode only. If the lock-

on button is activated in drilling mode, as a safety

feature the tool will switch off automatically.

To switch on the tool, press the on/off switch (a).

For continuous operation, press and hold down the

switch (a), slide the lock-on button (b) upwards and

release the switch.

To stop the tool, release the switch.

To stop the tool in continuous operation, press the

switch briefly and release it. Always switch off the

tool when work is finished and before unplugging.

Hammerdrilling

1. To switch on the tool, press the on/off

switch (a).

2. To stop the tool, release the switch.

Drilling with a Solid Bit (ﬁ g. 1)

1. Insert the appropriate drill bit.

2. Set the mode selector switch (g) to the

hammerdrilling position.

3. Set the electronic speed and impact control

dial (c).

4. Fit and adjust the side handle (j).

5. Mark the spot where the hole is to be drilled.

6. Place the drill bit on the spot and switch on the

tool.

7. Always switch off the tool when work is finished

and before unplugging.

Drilling with a Core Bit (ﬁ g. 1)

1. Insert the appropriate core bit.

2. Assemble the centerdrill into the core bit.

3. Set the mode selector switch (g) to the

hammerdrilling position.

4. Turn the electronic speed and impact control

dial (c) to a medium or high speed setting.

5. Fit and adjust the side handle (j).

6. Place the centerdrill on the spot and switch on

the tool. Drill until the core penetrates into the

concrete approx. 1 cm.

7. Stop the tool and remove the centerdrill. Place

the core bit back into the hole and continue

drilling.

8. When drilling through a structure thicker than

the depth of the core bit, break away the round

cylinder of concrete or core inside the bit at

regular intervals.

To avoid unwanted breaking away of concrete

around the hole, first drill a hole the diameter of

the centerdrill completely through the structure.

Then drill the cored hole halfway from each side.

9. Always switch off the tool when work is finished

and before unplugging.

Chipping and Chiselling (ﬁ g. 1)

1. Insert the appropriate chisel and rotate it by

hand to lock it into one of 24 positions.

2. Set the mode selector switch (g) to the

hammering only position.

3. Set the electronic speed and impact control

dial (c).

4. Fit and adjust the side handle (j).

5. Switch on the tool and start working.

6. Always switch off the tool when work is finished

and before unplugging.

MAINTENANCE

Your DEWALT power tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

WARNING: To reduce the risk of

injury, turn unit off and disconnect

machine from power source before

installing and removing accessories,

before adjusting or changing set-ups

or when making repairs. Be sure the

trigger switch is in the OFF position. An

accidental start-up can cause injury.

This machine is not user-serviceable. Take the

tool to an authorised DEWALT repair agent after

approximately 150 hours of use. If problems occur

before this time contact an authorised DEWALT

repair agent.

Brushes (ﬁ g. 2)

The yellow brushwear indicator LED (e) lights up

when the carbon brushes are nearly worn out.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of De Walt D25701K T-1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of De Walt D25701K T-1

De Walt D25701K T-1 User Manual - Polish - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

De Walt D25701K T-1 Manual

Product: