The oven has an high-performance air circulation system which gives remarkable results for cooking and cleaning, as long as the
following points are applied:
The oven may be fitted either underneath a work surface or in a suitable sized column unit. Cut a hole measuring 50 mm x 50
mm in the back wall of the insert space for the electric cable to pass through (see diagram below).
Centre the oven in the unit, and make that it is at least 2 mm from any other unit beside it.
The unit must be heat-resistant (or covered with heat-resistant material).
The oven must be disconnected from the power supply while it is being installed in the unit.
For greater stability , fix the oven in the unit with 2 screws in the holes on the side uprights (see diagram). Make a 3 mm diameter
hole in the side of the unit first to prevent the wood from splitting.
FFOORR TTHHEE FFIITTTTEERR
3. Installing a built-in unit
16
*Furthermore it can be installed both in
enclosed or open recesses.
