34569

De Dietrich UMP 50 Manual

12
Zoom out
Zoom in
Previous page
1/16
Next page
12
HOW TTO UUSE TTHE PPYRO-CCLEAN PPROGRAM
a)Remove any accessories from the oven and wipe off any excess grime.
b) Check that the programmer displays normal time and that it is not flashing.
c)Press the program selection touch control until the "Pyro-clean" program
appears.
Your oven displays the pyro-clean symbols and Ctl corresponding to "Pyro
Control".
You can select the another cycle ( 2h) non-changeable, by pressing the
+
touch control.
The ] symbol will then be displayed on your oven together with "Pyr" which
corresponds to the 2h Pyro cycle.
W ith this cycle the oven cannot be used for 2h 30. This time allows for cooling
down until the door automatically unlocks itself.
d) Press the S TART/STO P touch control.
For Pyro Control the symbol moves.
For Pyro 2h the symbol remains steady.
- The door is locked automatically during pyro-cleaning (after about 2 minutes).
- You can consult the finishing time for the pyro-clean cycle by pressing touch control (Only for the Pyro 2h cycle).
After pyro-cleaning the symbol remains lit until the door is automatically unlocked.
e) Stop the oven by pressing the START/STO P touch control.
f) After the oven has cooled down, use a damp cloth for removing the white ash.
The oven is now ready for use.
Note: The pyro-cleaning temperature cannot be altered. During the cleaning cycle the lighting is switched off. If your oven is
still not clean after pyro-cleaning you have delayed cleaning too long. Repeat the operation.
IMPORTANT: Do not hang any cloths or towels on the oven door handle.
During the pyro-clean operation, the front of the oven gets hotter than during normal cooking.
Keep children away.
how to use the pyro-clean program Model UMP 51*
How to program your pyro-clean to start when you want Model UMP 51*
Follow the instructions given in the section entitled "How to use the pyro-clean program", then:
1) For "Pyro Control":
a) Press touch control , the starting time of the pyro-clean program
flashes and the symbol also flashes to show that this time can be modified.
b) Set the time the program is due to start by pressing the
+ or
-
touch
controls.
Example: Begin the pyro-clean program at 5 am (05:00)
When the pyro-clean program is over press the S TART/STO P touch control.
NOTE : As the duration of the pyro-clean cycle is calculated during the cycle itself, depending on the state of the oven, you
can only adjust the time at which the cycle starts.
2) For the 2 hour Pyro:
a) Press touch control , the finishing time for the pyro-clean
program flashes and the symbol also flashes to show that this time can be
modified.
b) Set the time the program is due to finish by pressing the
+or
-
touch controls.
Example: End of pyro-clean program at 5:00.
When the pyro-clean program is over press the
START/STO P touch control.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for De Dietrich UMP 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of De Dietrich UMP 50 in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info