Manual De Dietrich INISOL - UNO-1 300 (page 14 of 20) (English)

608091

Zoom out

Zoom in

1/20

UNO/2 200, 300, 400, 500 - UNO/1 200, 300, 400, 500 06/02/12 - 300024525-001-B

 Adjustment parameter CX - Maximum collector

temperature

Adjustment range: 100 ... 125 °C

Factory setting: 100 °C



Maximum collector temperature (overheating safety): Non-

adjustable value: 130 °C.

If the temperature in the collector rises above its maximum

temperature CX even though the solar circuit is stopped (tank set

storage temperature reached), the solar pump (R1) switches on and

cools the collector (system cooling). In these conditions, the tank

temperature rises, but it can't exceed 80 °C (safety cut-off).

If the calorifier reaches the maximum temperature of 80°C (safety

shutdown), the regulator switches off the solar pump.



The collectors may reach a temperature of 160 ... 200°C, which

is normal for a solar installation.

The cooling functions allows heat to dissipate; the system thus

remains operational longer during hot summers. When it leaves the

factory, the collector's maximum temperature is preset to 100 °C;

however, it is possible to change this within the range 100 ... 125 °C.

If the maximum collector temperature is exceeded, the display shows

, and (flashing) and the LED changes to flashing red/

green.



Adjustment parameter tu - Self-calibration phase

Adjustment range: 1 ... 5 minutes

Factory setting: 1 minutes

When the solar collector reaches a minimum temperature of 30 °C

and a preset temperature difference of 10 K from the tank

temperature, the regulator switches on the solar circulating pump at

full speed for the time period set by parameter tu. During this phase,

any air bubbles present in the solar collectors or the pipes are moved

to the complete solar station by the high circulation speed in the pipes

and eliminated by the Airstop system (manual bleed degasser). After

this phase, the regulator changes to "matched flow" mode. The

remaining self-calibration time is displayed with parameter tc.



Adjustment parameter PN - Pump minimum

speed

Adjustment range: 50 ... 100%

Factory setting: 50%

Adjustment parameter PN sets a minimum value for the solar pump

speed at the relay R1 output. The lower the pump regime, the lower

its flow.

M000396

M000397

M000398

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of De Dietrich INISOL - UNO-1 300 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of De Dietrich INISOL - UNO-1 300

De Dietrich INISOL - UNO-1 300 User Manual - Dutch - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

De Dietrich INISOL - UNO-1 300 Manual

Product: