609084
7
Zoom out
Zoom in
Previous page
1/84
Next page
7
GT 530ADDR_G30A/AE _IO_V4.0 09/2013
Safety Information and Codes
CAUTION
The operator/ultimate owner is required to have the
heating boiler, burners, and controls checked, as a
minimum once per year, by the original installer or
by a competent heating contractor familiar with the
equipment. Defects must be corrected immediately.
Do not use this boiler if any part has been under water.
Immediately call a qualied heating contractor to inspect
the boiler and to replace any part of the control system
and any gas control which has been under water.
Do not store chemicals containing chlorine or other
corrosive materials near the boiler, such as bleach,
cleaning solvents, detergents, acids, hair spray, spray
cans, paint thinners, paint, or water softener salt.
Important
Do not use the boiler if any section of it has been
subjected to water or submerged in water. Immediately
call your service company to inspect and replace any
part of the control system and gas components which
have been subjected to water or submerged in water.
Boiler modication and spare parts
This boiler uses specic original manufactured parts.
The boiler must not be modied or non-OEM parts used
without the written approval from DDR Americas Inc.
Carbon monoxide
The installation of carbon monoxide detectors is highly
recommended by the U.S. Consumer Product Safety
Commission for buildings with gas burning equipment.
Sources of carbon monoxide include exhaust vents for
gas appliances or wood burning replaces that are not
properly vented, malfunctioning furnaces and exhaust
fumes from idling cars.
Carbon monoxide is a colourless and odourless gas
that is highly toxic. It can interfere with the delivery
of oxygen by the blood to the body. Exposure to low
levels of CO can cause headaches, confusion, nausea,
dizziness, fatigue, and shortness of breath. High level
exposure of CO can cause impaired vision, convulsions,
coma and possibly death.
Have a qualied service technician inspect the heating
equipment exhaust vent pipes and chimney ues on a
yearly basis.
In winter, inspect the exhaust vents for the dryer,
furnace, wood burning or gas stove, replace and heat
recovery ventilator to ensure they are not obstructed
by snow build-up.
Carbon monoxide detectors should be installed and
maintained in buildings that house gas burning
equipment. It is recommended to use a carbon
monoxide detector that is in compliance with a
nationally recognized standard such as ANSI/UL 2034-
2002 or CSA 6.19-01.
Codes
Installation, servicing and maintenance of this product
must be performed by a licenced and trained heating
contractor, experienced in hot water heating boilers as
well as gas and oil combustion. The installation must
conform to all national and local codes having
jurisdiction:
In Canada, CSA B149.1 Gas Code and CSA B139 Oil
Code.
In USA, ANSI Z223.1 (NFPA 54) Gas Code, NFPA
31 Oil Code and ASME CSD-1 Automatically Fired
Boilers.
If you have any technical questions or need assistance
with this product, please call your local Sales Represent-
ative or DDR Americas Inc.
Standards applied
We hereby certify that the series of appliances specied
hereinafter are in compliance with the latest standards
described, and that they are manufactured and
marketed in compliance with the requirements of the
following North American standards:
ASME Section IV
CSA B51
ANSI Z21.13-CSA 4.9 - Gas red steam and hot water
boilers.
CAN/CGA 2.17-M91 - Gas red appliances for use at
high altitude.
CGA P.2-1991 (R1999) - Testing method for measuring
annual fuel efciencies or residential furnaces and
boilers.
ANSI/UL 726 - Oil red boiler assemblies.
CSA B140.7- Oil burning equipment: steam and hot
water boilers.
CSA B140.0- Oil burning equipment: general
requirements.
CSA B212- Energy utilization efciencies of oil red
furnaces and boilers.
CAN/CSA C22.2 No.0-M91 - General requirements -
Canadian electrical codes part II.
CSA C22.2 No.3-M1988 - Electrical features of fuel
burning equipment.
UL795 - Commercial and industrial gas heating
equipment.
CAN1-3.1-M77 - Industrial and commercial gas red
package boilers.
UL353 - CSA 22.2 No. 24
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for De Dietrich GT530AE Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of De Dietrich GT530AE Series in the language / languages: English as an attachment in your email.

The manual is 13,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info