609083
52
Zoom out
Zoom in
Previous page
1/84
Next page
52
GT 530A DDR_G30A/AE _IO_V4.0 09/2013
Assembly + Set up
45.
46.
Installing the boiler door and lower crosspiece bracket (MR 245 or MR 246)
1
2
1. Put the boiler door in place (package MR245 or MR246)
and fasten with 2 tapping screws (Ø 3.94 x 12.7). The
boiler door may be cut in 2 at the micro-joints.
2. Attach the casing support lower crosspiece (package
MR245 or MR246) with 2 screws (H6 x 20) and 2 serrated
washers.
Note :
- A 1/8 diameter hole needs to be drilled on each side of
the burner mounting plate to accept the 2 self tapping
screws.
- On the larger model bolt hole patterns, you must clear
the boiler door to clear the 4 mounting studs for the
burner door
Installing the control panel bracket (MR245 or MR246)
2
1
3
2
1. Fit the 4 “Rapid” nuts on the front of the cable
channels.
2. Fit the “Rapid” nuts in the slots:
4 “Rapid” nuts for 15 to 17 sections.
8 “Rapid” nuts for 18 to 25 sections.
3. Attach the control panel bracket (package MR245
or MR246) underneath the 2 cable channels by
means of 2 screws (H8 x 16) and 2 serrated
washers.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for De Dietrich GT 530A Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of De Dietrich GT 530A Series in the language / languages: English as an attachment in your email.

The manual is 13,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info