609083
48
Zoom out
Zoom in
Previous page
1/84
Next page
48
GT 530A DDR_G30A/AE _IO_V4.0 09/2013
GT 530A-18 and GT 530A-20
40. Installing the lower rail support brackets (FA17 to FA27)
41. Installing the fastening brackets of the upper and lower rails (MR245 or MR246)
Fasten the lower rail with H8 x 30 screws and L8
washers.
The other rail support brackets are fastened
opposite the holes provided on the lower rail.
Length required while assembling the 2-piece rails
(boilers with 18 to 25 sections), see g.12.
1. Fix the fastening bracket of the upper rails (MR245 or MR246) on the upper lug (these brackets must be vertically aligned
with the lower rail support brackets).
2. Fit the bracket onto the stub.
3. Fasten with 1 screw H10 x 50 and serrated washers and H10 nuts.
4. Assemble 1 “Rapid” nut on the top of the bracket with the tapped shaft on the inside.
4
3
1
2
2
2
Assembly + Set up
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for De Dietrich GT 530A Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of De Dietrich GT 530A Series in the language / languages: English as an attachment in your email.

The manual is 13,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info