481718
65
Zoom out
Zoom in
Previous page
1/76
Next page
64
De Dietrich Gas 310/610 ECO
15.4.7 Cleaning the condensate collector
Clean the condensate collector by removing the inspection cover (next to the flue gas discharge) and then rinsing
the collector with water
15.4.8 Cleaning the siphon
Remove the complete siphon (located underneath condensate collector beneath the flue connection).
Remove siphon, clean and refill with clean water and re-fit.
15.4.9 Cleaning/Replacing the Ignition/Ionization electrode
Remove safety bracket from the heat exchanger then remove the two retaining screws on the electrode
assembly, remove assembly and examine for wear and
dirt, clean and re-gap electrode 1/8” [3mm] re-fit if in good
condition (replace gasket if necessary).
Replace electrode assembly if necessary then discard
screws and gasket and fit replacement assembly c/w new
gasket and screws making sure that the earth connection is
in good condition and in contact with the base plate and re-
fit safety bracket.
Fig. 34 Condensate collector inspection
Fig. 35 Condensate siphon assembly
Fig. 36 Ignition/ionization electrode
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for De Dietrich Gas 610 ECO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of De Dietrich Gas 610 ECO in the language / languages: English as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info