481718
48
Zoom out
Zoom in
Previous page
1/76
Next page
47
De Dietrich Gas 310/610 ECO
11.1.2 LED indicators
The instrument panel has 4 indicating LED’s with the following functions:
The LED above the [-] key (in the symbol); when illuminated green confirms the boiler is in manual
override (see section 11.2)
The LED above the [] key indicates that “24 hour pump operation” has activated the heating pump
(and the shunt pump if required).
The LED above the [+] key flashes if the optional hydraulic pressure sensor detects that the water
pressure is too low.
The LED above the [] key flashes if there is no communication with the code key (code key not
connected).
Two LED’s flash green when there is no communication anymore between code key and control unit.
The boiler will keep on operating. Only after the power supply was switched off and back on, the boiler
will refuse to operate.
11.2 Switch function key
Some keys on the instrument panel have dual functions, i.e. a programming and a switch function.
The programming function is described in section 13.
The switch function (on or off) is activated by pressing down the relevant key for 2 seconds. Whether the function
is switched on or off is indicated by the indicator for the key, which is either lit or not lit, or by the appearance of a
letter in the code window.
11.2.1 Manual/automatic operation
If the [-] key is pressed for 2 seconds the boiler will switch on, even if there is no heat demand from an external
control. The green LED above the key stays on continuously to indicates a manual heat demand (central heating
bridged internally). When the [-] key is pressed for 2 seconds again the boiler will return to automatic central
heating operation (green LED off).
During manual operation the flow temperature cannot exceed its pre-set maximum value. This is to protect
the boiler and the system. Parameters can be changed during manual operations.
Important!! If the external heating pump is not connected to the control unit, the pump will not be switched.
11.2.2 Forced mode ‘high’ ()
By pressing the and [+]-key simultaneously in operating mode during 2 seconds, the boiler will run at maximum
power. The letter will now appear on the display. To protect the boiler and the system, the flow temperature
cannot exceed its pre-set maximum value. This is...Parameters can be changed in this mode. By pressing the
[+]-key and {-}-keys simultaneously, the boiler will return to operating mode.
Following a manual override the boiler will return to normal (auto control) if no keys are used within a 15-minute
period.
11.2.3 Forced mode ‘low’ ()
By pressing the and [-]-key simultaneously in operating mode, the boiler will run at minimum power. The letter
will now appear on the display. To protect the boiler and the system, the flow temperature cannot exceed its
pre-set maximum value. This is... Parameters can be changed in this mode.
By pressing the [+]-key and [-]-key simultaneously, the boiler will return to operating mode.
Following a manual override the boiler will return to normal (auto control) if no keys are used within a 15 minute
period.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for De Dietrich Gas 610 ECO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of De Dietrich Gas 610 ECO in the language / languages: English as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info