What to do before using the machine for the first time
Salt reservoir
Should any regenerating salt overflow when filling,
we recommend that you remove the loose salt crystals
to avoid oxidising the tub.
Never put deter-
gent in this reservoir:
this will ruin the water sof-
tener.
- Unscrew the salt reservoir’s stopper and
remove it.
- Use the funnel to introduce the salt.
- Fill the reservoir with regenerating salt
specially designed for dishwashers.
- On the first time, add water
until it reaches the edge
of the reservoir.
- Screw the salt reservoir’s stop
back in fully.
See Page 76-78 : symbol
indicating the level of regener-
ating salt:
After you have refilled the salt
reservoir, this symbol may still
flash until the salt has dissolved
sufficiently, generally after one
cycle (or if the reservoir has not
been completely filled, for instance
when putting the machine into
operation using the sample).
SEL
Do not use kitchen
salt.
If the water is especial-
ly soft and does not require
the use of any regenerating salt, the
SALT light remains lit.
65
EN
③③
Filling the regenerating salt reservoir
You must fill this, with water just
before starting your first wash then
add the salt:
Filling with salt is essential to obtain a good
wash with no streaks. The salt regener-
ates the resins, which soften the water by
removing its limestone content unless the
water is already sufficiently soft (see
“Adjusting the water softener”).
