41
5/ DETERGENT PRODUCTS AND SETTING THE WATER SOFTENER
EN
Important :
The multi-purpose products setting enables you to de-activate the rinsing products and salt
warning lights only on the hardness setting from 0 to 10°F.
• Loading multi-purpose tablets
To make loading the detergent easier, the distributor is located on the front of the upper basket; it
is compatible with all the products recommended for your dishwasher.
• Place the tablet
in the external compartment (Fig 04 on previous page) or
or, for optimum operation, pull out the distributor’s drawer and lay the tablet there. (Fig 05 on pre-
vious page).
- Close the distributor.
Fig. 04 Fig. 05Fig. 03
Important:
It is very important to set your water softener correctly.
- If the setting is too low, there is a risk of chalky marks
- If the setting is too high, there is the risk of the glasses becoming cloudy
If you move house, re-adjust the setting on your water softener.
• Traditional tablets
Place tablets that are not multi-purpose in the external compartment (Fig 04)
or, for optimum operation, pull out the distributor’s drawer and lay the tablet there. (Fig 05)
• Powder or liquid in the distributor’s drawer (Fig 03)
Fill at least up to the minimum mark for slightly dirty crockery and up to the maximum mark for dirty
crockery. If the crockery is very dirty or for programmes with pre-wash, we recommend that you
add 5g of detergent (a dessertspoonful) to the tub in accordance with the programmes table.
Important:
Keep these products in a dry place, out of children’s reach.
Only use products specially designed for dishwashers.
