54
14 / YOUR DISHWASHER’S SAFETY SYSTEMS
EN
•
Door not properly closed
The display flashes if the door is open or not properly closed.
•
Programme access block
While a dishwasher programme is running, the buttons are automatically blocked to prevent them
from being pressed accidentally. The dishwasher will automatically unblock at the end of the pro-
gramme or you can cancel by holding down the “START/C” button for 2 seconds.
•
Anti-overflow safety system
This system automatically activates the drain pump if the water level in the tank is exceptionally high.
•
Anti-leak safety system
This system cuts off the water supply if any leakage is detected under the appliance.
•
Total safety
The inlet pipe is equipped with a mechanism that directly cuts off the water supply to the tap in case
of leakage.
•
Error display
The error code appears on the display. See the table on page 55.
Observation :
After rectifying the error, hold down the “Start/C” button for three seconds to unblock
access..
