51
EN
12 / PROGRAMMING
Time delay
on hold
End of programme
• Delayed programme start
You may choose to delay the start of the wash
programme with this dishwasher :
Choose the programme.
Press button once.
Delay programme start-up by either 1 to 12 hours
by pressing one of the buttons
.
Validate your choice by pressing button .
The indicator " " is on the screen and
count every hour until the start of the program.
When the programme finishes, the word
will appear on the display. Then Switching to
energy savings (see page 37).
E
G
C
Programme
length
•
Cancelling a programme
To cancel a programme or if you have made the
wrong selection, hold down button G for a
few seconds until you hear the “cancel” beep.
You can then programme the dishwasher again.
G
Remarks :
The door’s electrical safety system can cause the indicator lights to illuminate briefly when
the door is opened or closed. This phenomenon does not affect your machine’s operation.
If required, and particularly after the water softener has been reset, the programme may start with
three minutes of resin regeneration. This is a silent operation.
•
Switching off the appliance
When the programme has ended, press
button .
A
