A
B
C
•
Loading the rinsing product
.
(Fig. 07)
Important :
Use a special dishwasher rinse aid product
to improve drying and prevent filming.
Unscrew and remove the compartment
cap.
Before starting up the dishwasher, fill the
compartment with rinse aid up to the adjust-
ment lever.
Firmly screw the cap back on.
The default adjustment is 2.
If drying is inefficient or marks are leftthe glasses
(after having run several cycles), you may
increase the dosage by setting the adjustment to
3;
Tip :
Setting the adjustment to 1 reduces rinse
aid consumption and may be sufficient for your
needs.
• Determining the rinse aid product
level :
This pilot light comes on when rinse aid needs
to be added.
C
A
B
Important :
If the rinse aid overflows onto the door
on refilling, sponge off the excess to prevent
foam from forming.
