40
EN
Important :
IIt is essential to correctly adjust the water softener according to the hardness of the water in
your area.
-If the adjustment is too low, scale may be left on the dishes.
-If the adjustment is too high, there is a risk of glasses becoming cloudy.
If you move house, adjust the water softener again.
5 / WATER SOFTENER ADJUSMENTS
• Proceed as follows to adjust the water softener to the control table :
Fig. 02b
—
This adjustment is to be done at the “SET” Adjustment stages (see page 41).
— To change the adjustment between H0 and H6, according to the water hardness (see the table
below), briefly press the up or down buttons
successively. The display will indicate the
adjustment
.
— Make sure you validate the adjustment by briefly pressing “Start/C” twice (to exit the
“SET” Adjustment menu, see page 11).
— To use multi-function tablets you must select adjustment H0 or H1 or H2, according to the water
hardness. < 25ºF. Make the adjustment as indicated on page 41.
Important :
Adjustment H0 disables the salt refill indicator light.
Hardness
0-10°F
0-1mmol/l
0 - 5,6 °dH
10-18°F
1-1,8mmol/l
5,6 - 10 °dH
18-25°F
1,8-2,5mmol/l
10 - 14 °dH
25-40°F
2,5-4mmol/l
14 - 22,4 °dH
40-55°F
4-5,5mmol/l
22,4 - 30,8 °dH
55-70°F
5,5-7,0mmol/l
30,8 - 39,2 °dH
> 70°F
>
7,0mmol/l
> 39,2
°dH
Adjust
ments
HIH0 H2 H3 H4 H5 H6
