743330
9
Zoom out
Zoom in
Previous page
1/32
Next page
The water softener must be set manually, using the water hardness dial.
The water softener is des igned to remove minerals and salts from the water, which woul d have
a detrimental or adverse effect on the operation of the app liance.
The more minerals there are, the harder your water is
The soft ener sho uld be adjusted according to the hardness of the water in your area. Your local Water Author ity
can advise you on the hardne ss of the water in your area.
Adjusting Salt Consumption
The dishwasher is designed to allow for adjustment in the amount of sa lt co nsumed bas ed on the ha rdness of
the water used. This is intended to op timise and customise the level o f salt consumption.
WATER SO FTENER
The hardness of the water varie s from place to plac e. If hard water is used in the dishwasher, de posits will
form on the dish es and utensils.
The applian ce is equipped with a sp ecial softener that uses a salt container specifically des igned to eliminate
lime and minerals from the water.
Contact your local water board for information on the hardness of your water supply.
If your model does not have any water softener, you may skip this section.
Clark: British degree
fH: French degree
dH: German degree
dH=1.25 Clarke=1.78 fH =0.178mmol/l
1
The manufactory setting: H3 (EN 50242)
Before using your dishwasher for the first time :
A. Set the water softener
B. Add 1.5Kg dishwasher salt an d then full fill the salt con tainer with water
C. Fill t he rinse aid dispenser
D. Fill i n detergent
Please follo w the steps below for adjustment in salt consumption.
d
H
mmol/l
0~90~5 0~0 .9 4
H1
0
10-20
6
-11
1
.0-2.0
H2
9
21-3012-17 2.1-3.0
H
3
1
2
H 4
20
f
H
0
~6
7-14
15-21
Clarke
WA
TER HARDNESS
Sel ector Position
Salt con sumption
(gram/cycle)
1
8-22 31-40 22-28 3.1-4.0
41-6023-34 4.1-6.0 H5 30
H 6
60
2
9-42
3
5-55 61-98 43-69 6.1-9.8
1. Close the door ,Switch on the appliance;
2. Press the Star/Pause button for more than 5 seconds to start the water softener
set model within 60seconds after the a ppliance is switched on( The Salt and
Rinse aid warning lights will be on periodically when it get in the set model );
3. Press the but ton to select the proper set according to your local environment,
th e sets will chang e in the following sequence: H1->H2->H3->H4->H5->H6;
4. Press the Pow er b utton to end the set up model.
Star/Pause
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for De Dietrich DVH1044X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of De Dietrich DVH1044X in the language / languages: English as an attachment in your email.

The manual is 3,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info