55
EN 13/ YOUR DISHWASHER’S SAFETY SYSTEMS
•
Door poorly closed
After confirming the programme (“Start” button), your dishwasher issues three short high-pitched
beeps to indicate that the door is not closed and the light for the selected programme flashes.
•
Programme access lock
Throughout the period the programme is running, or the full duration of the programme, the
programme selector and the buttons are automatically protected from any kind of manipula-
tion. This unlocks automatically at the end of the programme or when the programme is can-
celled by holding down the “Start” button for 3 seconds.
•
Advice on cleaning the filters
Approximately every month, your dishwasher advises you to proceed to service the
filters (see Section “Cleaning the waste filters” - Fig. 14-15).
•
Anti-overflow system
This system activates the drain pump automatically if the water in the tank reaches an abnormal
level.
•
Anti-leak protection system
This system cuts off the water supply if a leak is detected under the appliance.
•
Total safety
This supply pipe is fitted with a device to cut off the water supply directly at the tap if there is a leak.
•
The warning light
Error in programme or incident (refer to para 14 ‘Operating faults').
- If there is a fault, the display will show the fault code:
•
SAFETY SYSTEMS
