39
EN
2/ DESCRIPTION OF YOUR APPLIANCE
• PRESENTATION OF THE CONTROL PANEL
On/Off:
Press this button to start your dishwasher.
Choosing a programme:
briefly
press one button or the other in succession
to select your programme.
:
IInntteelllliiggeenntt CCoonnttrrooll SSyysstteemm
press this button to select the Automatic pro-
gramme.
Set:
(see para. 9, adjustment of settings)
Holding down the
“Set”
button brings up the
settings menu;
- choice of language,
- Set the water softener,
- Activate or deactivate the “Regenerating
Salt” and/or “Rinsing Product” lights, or the
“TABS
AUTO” function (depending on the water
softener setting on the following pages).
- Beep at end of programme,
- Set screen brightness.
Choice of delayed-start washing:
Press this button to delay the programme
by 1 to 12 hours.
Start/Cancel:
Briefly press this button
to start your programme.
If you make an error, to cancel a selection or
cancel a programme while it is running, hold
down this button for 3 seconds.
The indicator lights:
SSaalltt::
When lit, it indicates lack of regenerating salt
Rinsing liquid:
When lit, it indicates lack of rinsing product
Multipurpose products:
lit; shows you that the “TABS
AUTO” feature is
turned on and that the programmes are now
automatically adjusted if a multi-function tablet
is used.
Current programme:
on: shows current programme.
The front display screen:
Displays the current time, the programme end
time, the time
remaining and the
warning lights.
F
E
D
C
B
A
Advice:
A short audible signal (beep) confirm the button’s selection, except for the “On/Off” button.
In the interests of energy conservation, the front display light goes off after the dishwasher has been inac-
tive for a given time.
To ease loading, the dishwasher’s internal light comes on when the door is opened and goes off when you
push or close it, regardless of the position of the On/Off switch.
Fig. 02
A D E F
C
B
