Installing your hob in all simplicity
37
Changing the type of gas supply
When carrying out this operation, you
should successively:
➊
Adapt the gas connection
❷
Change the injectors
❸
Adjust the retarder on the taps
➊
ADAPT THE HOB CONNECTION to the
new gas adjustment. Refer to the pa-
ragraph “Gas connections”.
❷
CHANGE THE INJECTORS in the follo-
wing way:
•
Remove the supports, and all the
burner caps and heads.
•
Using the spanner supplied, uns-
crew the injectors at the bottom of ea-
ch dish and remove them (fig 1).
•
Replace these with the injectors
supplied in the wallet, in accordan-
ce with the gas rating table at the
end of the chapter; to do this:
➪ Screw in the injectors by hand
until they are tight.
➪ Put the spanner well onto the in-
jector.
➪ With a pencil draw a line on the
hearth plate as indicated (fig. 2).
➪ Turn the spanner clockwise un-
til the line appears on the other
side (fig. 3). Warning! Do not
go beyond this limit as you
are liable to cause damage.
Spanner
Spanner
Line
Line
Fig. 3
Fig. 2
Cover
Head
Dish
Grill
Glass top
Fig. 1
● Changing from natural gas to
butane/propane gas
● Preliminary remarks
Your hob is delivered regulated
for natural gas.
The injectors for adapting the hob for use
with butane or propane are in the wallet
containing the instructions, together with
the adaptor and the sealing washer. Please
see the corresponding paragraph on
"Gas Connections".
You can obtain an adapter sachet
from your After-sales Service.
Every time you change your gas
supply, mark the square on the label
in the wallet that corresponds to the
new type of gas (See "Gas Rating" in
this chapter).
