43
How do you clean the cavity of your oven?
Your oven displays the three pyrolysis symbols corresponding to a two-hour
pyrolysis cycle (non-adjustable)
You can select two other pyrolysis cycle lengths (
1:45, 1:30) that are non-adjustable by
turning the selector button.
The oven cannot be used for 2:00, 2:15 or 2:30.
This time includes the cooling time until the door
can be unlocked.
d) Enter the programme by pressing the selector button. The door locks
during the pyrolysis cycle (after approximately two minutes). You can check the
time at which the pyrolysis cycle should end by pressing the touch control.
At the end of the pyrolysis cycle, the symbol id displayed until the door is unlocked
e) Turn off the oven by pressing the selector button.
f) When the oven is cool, use a damp cloth to remove the white ashes. The oven is
clean and once again ready for the cooking application of your choice. Notes: The cleaning
temperature cannot be adjusted. During the pyrolysis cycle, the oven lighting is off. If your
oven is not clean after a pyrolysis cycle, you waited to long to launch the cleaning cycle.
Repeat the cycle.
2) How do you program for delayed pyrolysis?
Follow the instructions described in the “Programming for immediate pyrolysis” section,
then
a) Press the touch control,
the pyrolysis end time flashes to indicate
that it is now possible to set it.
b) Adjust the pyrolysis end time by
turning the selector button.
Example: Pyrolysis ends at 5:00.
When the pyrolysis cycle is finished, press the selector button.
GB
