34563
23
Zoom out
Zoom in
Previous page
1/26
Next page
21
If the appliance is not operating correctly, before calling our
Technical Support service, CHECK the following:
If the incoming gas flow seems abnormal, ensure that:
The holes of the burner flame diffusers are not blocked.
With bottled gas, check that there is still gas in the bottle.
The pressure regulator is operating.
The gas tap on the bottle is fully open.
SMELL OF GAS IN THE ROOM
ensure that the tap has not been left open;
the gas supply hose is correctly in place and in good condition;
remember to abide by the expiry date for use.
NEVER TRY TO FIND A GAS LEAK USING A MATCH.
CHECK SEALS USING SOAPY WATER.
CALL A QUALIFIED ENGINEER
Control knobs or facia panel too hot
Is the oven door latching and sealing properly?
Check that the cooker vents and grills are not blocked.
When the oven is on DO NOT leave the oven door open for lon-
ger periods than necessary. The oven should NOT be used for
heating the kitchen, not only does this waste fuel but the control
knobs may over heat.
Burners will not light
If only the hotplate burners will not light make sure that the bur-
ner parts have been replaced correctly. See instructions on page
24.
Do the burners spark when you press the knobs? If not is the
power on?
Is the power on? Is the clock illuminated? - If not there may be
something wrong with the power supply. Is the cooker supply on
at the isolator switch. If the power supply is OK then there is pro-
bably something wrong with the ignition system.
Check that there is not a problem with your gas supply. You can
do this by making sure that other gas appliances you may have
are working.
Power failure
When power is restored the clock must be reset to the time of
day.
Food is cooking too slowly, too quickly or burning.
Cooking time may differ from your previous oven. Check that you
are using the recommended temperatures and shelf positions.
See page 12. The oven control settings and cooking times are
intended to be used only as a guide. Individual tastes may requi-
re the temperature to be altered either way, to get the best
results you want.
Try cooking at a higher shelf position and/or higher tempe-
rature.
Is the oven door latching and sealing properly?
The oven is not cooking evenly.
Check that you are using the recommended temperatures and
shelf positions.
Do not use a tin or tray larger than the baking tray we supplied.
If you are cooking a large item be prepared to turn it round during
cooking.
If two shelves are used, check that space has been left for the
heat to circulate.
Conventional Oven
When the baking tray is put into the oven make sure the tray is
pushed to the back of the shelf.
Check that the door seal is not damaged and that the door catch
adjusted so that the door is held firmly against the seal.
Is the cooker level? A dish of water when placed on the shelf
should have the same depth all over. (For example, if it is deeper
at the back, then the back of the cooker should be raised up or
the front lowered). If the cooker is not level arrange for your sup-
plier to level it for you.
Do not use the base of the oven for cooking, it is not designed to
be used as an extra shelf position.
Oven not coming on:
Is the power on? Is the clock illuminated - if not there may be
something wrong with the power supply. Is the cooker supply on
at the isolator switch? Check the fuse.
Is the clock flashing 0.00? If so set to the correct time of day.
Has the Timer been set to auto by mistake, or after a power cut?
If AUTO is showing on the clock press the COOKING DURA-
TION and END TIME buttons to set the oven back to manual.
Automatic Cooking
Timer set correctly but oven knob left OFF by mistake?
Automatic Timer faulty
Is the power on? Is the clock illuminated - if not there may be
something wrong with the power supply. Is the cooker supply on
at the isolator switch?
Smell from the oven
When you first use your cooker it may give off a slight odour as
any protective oils are burnt off but this will stop after a little use.
Oven light not coming on
Is the bulb burned out? Replace with 25 W oven bulb (page 13).
Befor
Befor
e calling for assistence
e calling for assistence
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for De Dietrich CR4844 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of De Dietrich CR4844 in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info