607563
17
Zoom out
Zoom in
Previous page
1/24
Next page
17
20/02/09 - 300015144-001-C C 230 ECO
BURNER FAILURE 14
- No flame after 5 ignition attempts
- No ignition spark
- Reset the box
- Check the correct connection of the ignition cable and
that there is no breakdown or short circuit on the earth
Check:
- the gap between the electrodes (3 to 4 mm)
- Burner cover status (Burner / electrode cover closed)
- Faulty control by the SU board
- No flame after 5 ignition attempts
- No flame
- Reset the box
- First check that the gas valve is open, that the gas
supply pressure is present, that the gas conduit has
been sufficiently bled, that the air/flue gas conduit is not
blocked and is not leaking, that the siphon is full and not
blocked
- The gas valve unit must be set with precaution
- Gas block: Wiring OK
-
Faulty control by the SU board
- No flame after 5 ignition attempts
- Flame present (insufficient ionization)
Check the correct connection of the ignition cable and that
there is no breakdown or short circuit on the earth
Check:
- Check the electrode condition
- Opening the gas valve on the boiler
- Gas supply pressure
CCE TEST FAIL 15
- The cyclical leak proofing kit (CCE) has
detected a leak
- Reset the box
Check:
- Opening the gas valve on the boiler
- Gas supply pressure
- Replace the gas valve (If necessary)
PARASIT FLAME 16 Detection of a parasite flame
- Reset the box
Check:
- Ignition/ionization electrode
- Leak on the gas valve
- Gas inlet valve closed (Compulsory)
VALVE FAIL 17 Gas valve defective
- Reset the box
- Check the link and the connectors
- Check the gas valve and replace if necessary
FAN FAILURE 34 The fan is not running at the right speed
- Reset the box
Check:
- Cabling error
- Fan error
BACK>BOIL FAIL 35
The return temperature is higher than the
boiler temperature
- Reset the box
- Check the water circulation direction in the boiler
- Check that the boiler sensor and the return sensor have
not been reversed
I-CURRENT FAIL 36
The flame went out more than 5 times in 24
hours while the burner was operating
- Reset the box
Check:
- Gas supply pressure
- Pressure regulator
- Setting the gas valve unit
SU COM.FAIL 37
Communication breakdown between PCU
and SU
- Reset the box
- Check the installation of the SU on the PCU
PCU-M3 COM.FAIL 38
Communication breakdown between PCU
and DIEMATIC-m3
- Reset the box
- Check the link and the connectors
Faults Code no. Probable causes Action
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for De Dietrich C 230 ECO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of De Dietrich C 230 ECO in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of De Dietrich C 230 ECO

De Dietrich C 230 ECO User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info