481702
23
Zoom out
Zoom in
Previous page
1/32
Next page
4 Clean the outside of the heat pump using a damp cloth and a mild
detergent.
CAUTION
Only a qualified professional is permitted to clean the
inside of the heat pump.
5.3 Top up the installation with water
The water pressure in the installation must be between 1,5 and 2
bar. Add water to the installation if necessary:
1. Open the valves on all radiators connected to the heating system.
2. Set the room thermostat to as low a temperature as possible.
3. Put the heat pump in shutdown/frost protection mode.
¼
"Changing the operating mode", page 18
4. Open the filling valve .
5. Close the filling valve when the pressure gauge shows a pressure
of 1,5 bar.
6. Put the heat pump into HEATING mode.
¼
"Changing the operating mode", page 18
7. When the pump has stopped, bleed again and top up the water
pressure.
8. Filling and bleeding the installation 2 times a year should be
sufficient to obtain an adequate hydraulic pressure. If it is often
necessary to top up the installation with water, contact your fitter.
5.4 Bleeding the heating system
It is essential that you bleed any air in the calorifier, the conduits or
the taps to prevent the annoying noises likely to be produced during
heating or when tapping water.
M002277-A
1
2
3
4
T000181-B
M002213-B
AWHP MIV-II
5. Checking and maintenance
23/04/2013 - 300023321-001-03
22
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for De Dietrich ALEZIO - AWHP MIV-II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of De Dietrich ALEZIO - AWHP MIV-II in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of De Dietrich ALEZIO - AWHP MIV-II

De Dietrich ALEZIO - AWHP MIV-II User Manual - Dutch - 28 pages

De Dietrich ALEZIO - AWHP MIV-II User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info