607552
37
Zoom out
Zoom in
Previous page
1/48
Next page
Code Faults Cause
of the
fault
Description Checking / solution
L14 BURNER FAILURE
PCU 5 burner start-up failures No ignition
4 Contact the professional who takes care of
maintenance of the appliance
Ignition arc, but no flame formation
4 Check that the gas valve is fully opened
4 Contact the professional who takes care of
maintenance of the appliance
Presence of the flame but insufficient ionization
(<3 µA)
4 Check that the gas valve is fully opened
4 Contact the professional who takes care of
maintenance of the appliance
L16
PARASIT FLAME
PCU Detection of a parasite flame Ionization current present even though there is no
flame
Ignition transformer defective
Gas valve defect
The burner remains very hot: CO
2
too high
4 Contact the professional who takes care of
maintenance of the appliance
L17 VALVE FAIL
PCU Problem on the gas valve SU PCB faulty
4 Contact the professional who takes care of
maintenance of the appliance
L34 FAN FAILURE
PCU The fan is not running at the right
speed
Bad connection
Fan defective
4 Contact the professional who takes care of
maintenance of the appliance
L35 BACK>BOIL FAIL
PCU Flow and return reversed Bad connection
Sensor fault
4 Contact the professional who takes care of
maintenance of the appliance
Water circulation direction reversed
4 Check the circulation (direction, pump,
valves)
L36 I-CURRENT FAIL
PCU The flame went out more than 5
times in 24 hours while the burner
was operating
No ionization current
4 Check that the gas valve is fully opened
4 Contact the professional who takes care of
maintenance of the appliance
L37
SU COM.FAIL
PCU Communication failure with the SU
PCB
Bad connection
4 Contact the professional who takes care of
maintenance of the appliance
L38 PCU COM.FAIL
PCU Communication failure between the
PCU and SCU PCBs
Bad connection
SCU PCB not connected or faulty
4 Contact the professional who takes care of
maintenance of the appliance
L39 BL OPEN FAIL
PCU The BL inlet opened for a short time Bad connection
External cause
Parameter incorrectly set
4 Contact the professional who takes care of
maintenance of the appliance
AGC 10/15 AGC 15 AGC 25 AGC 35 7. Troubleshooting
28/05/2015 - 300026080-001-05
36
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for De Dietrich AGC 10-15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of De Dietrich AGC 10-15 in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of De Dietrich AGC 10-15

De Dietrich AGC 10-15 Installation Guide - German - 144 pages

De Dietrich AGC 10-15 User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info