529052
8
Zoom out
Zoom in
Previous page
1/8
Next page
Days Healthcare Standard Steel Wheelchairs
User’s Guide
- 8 -
Adjustment Procedures
Swing-away Footrest
Length
Adjustment
Adjustments are made with the user sitting in the wheelchair with feet on
footplates.
1) Use a spanner to loosen the bolt at the rear of the footrest
support hanger.
2) Adjust the footplate up or down as needed to provide
maximum support of thighs on the seat upholstery, then
re-tighten the bolt.
WARNING!
Ensure that desired front rigging adjustment does not cause pressure to legs at
front of seat upholstery.
Swing-away Elevating Legrest
Raising
1) Lift up on foot plate or support assembly behind
the calf pad until desired position is achieved.
2) Release the foot plate; it will automatically lock
into position.
Lowering
1) Firmly grasp leg rest close to foot pate and provide
vertical support.
2) Activate the leg rest lever by pushing it out
3) Slowly lower the footplate until desired position is reached.
WARNING
!
Do not allow leg rest to suddenly drop.
Support Assembly
Legrest
Lever
Calf Pad
Bolt
Footplate
- 9 -
Operations of Use
Footrests
Your footrests are capable of being rotating outwards. To achieve this pull the
release lever towards you and rotate footrest in the required direction. Lift-off
from the two pivot points to remove.
Armrests (Detachable type)
Both armrests are removable. To operate, push the release lever down to unclip
and lift arm out of front socket and rear sockets.
Manual Brake
This is a parking brake which is applied manually to the tyres when the chair is
parked or stationary. To apply the brake, push the lever forwards until the shoe is
locked in place. Pull backwards to release.
Folding Back (If fitted)
This is available to reduce the overall height of the chair. Whilst at the rear of the
chair, grip the small lever and push down to release pin allowing the handle sec-
tion to be folded.
Folding and Unfolding the Chair
Remove the seat cushion. The wheelchair is folded by grasping the seat canvas at
the front centre with one hand and at the rear with the other. A simple lifting
action will draw both sides of the chair together into the folded position.
When both wheels have been secured, grasp both side frames of the wheelchair
and pull apart as far as possible or at least until there is sufficient room to push
down on the sides of the seat canvas. The chair is fully open when the seat canvas
is taut and flat. Place the seat cushion on top of the canvas with the angled edge
towards the front of the chair. Note that Velcro holds this in place.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Days 108 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Days 108 in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info