562605
40
Zoom out
Zoom in
Previous page
1/46
Next page
Shared Key
Authentication
Sets whether shared key authentication
is required to associate. A valid
network key must be set and selected if
required.
Depends on Network
Authentication setting.
See <.
Optional
PassPhrase
Sets the text to use for WEP keys
generation.
Depends on Data
Encryption setting..
<NULL>
Network Key 1
thru Network
Key 4
Enter 5 ASCII characters or 10
hexadecimal digits for a 64-bit key.
Enter 13 ASCII characters or 26
hexadecimal digits for a 128-bit key.
Depends on Data
Encryption setting..
<NULL>
Current
Network Key
Selects which network key is used for
encrypting outbound data and/or
authenticating clients.
Depends on Data
Encryption setting..
1
<Table 11> Security Setting Definitions
3.3 Access Control using MAC Filter
The Access Control page allows the user to store MAC addresses of specific wireless clients
and allow or deny them access to the network. To add MAC addresses to the list, simply type
each address in one MAC address blank and click Save/Apply to store it. To do nothing with
the addresses entered, just leave the MAC Restrict Mode set to Disabled. To allow WAN and
private LAN network access to all of the MAC addresses entered, exclusively, click on the
Allow sphere. To deny network access to all of the MAC addresses entered, click on the Deny
sphere to Deny.
This Deny setting will block all of the listed wireless clients from gaining access to the WAN
as well as the private LAN. A list of connected clients is shown at the bottom of the page.
Setting Description Value List or Range Default
MAC
Restrict
Mode
Selects whether clients with the
specified MAC address are allowed or
denied wireless access.
Disabled, Allow, Deny Disabled
MAC
Addresses
Allows or denies wireless access to
clients with the specified MAC
addresses. Accepted input MAC
address formats are
XX:XX:XX:XX:XX:XX and XX-XX-
XX-XX-XX-XX.
The display format shall be
XX:XX:XX:XX:XX:XX.
GUI: 16 addresses; Non-Vol:
32 addresses. Customers can
display more in GUI, if
desired.
<NULL>
<Table 12> Access Control Settings Definitions
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Davolink DV-2010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Davolink DV-2010 in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info