552859
13
Zoom out
Zoom in
Previous page
1/56
Next page
Setup Mode
9
Note: A Vantage Vue or Vantage Pro2 ISS or a Vantage Pro2 Anemometer Transmitter Kit must be
powered for the console to recognize it. Refer to the Integrated Sensor Suite Installation Manual
or other station manual for more information. It may take several minutes for the console to
acquire and display a transmitter ID after power is applied to both units.
1. Make a note of the station number(s) listed on the screen.
2. Press DONE to move to the next screen.
Screen 6: Configuring Transmitter IDs
Setup Screen 6 allows you to change the ISS
transmitter ID and to add or remove optional
transmitter stations.
The default transmitter ID setting is “1 VUE
ISS” (refers to a Vantage Vue ISS), which is
appropriate for most installations. If you are using only the Vantage Vue ISS with ID 1 press
DONE to move to the next screen.
Note: Typically, you can use the default transmitter ID setting of 1 unless a nearby neighbor has a
Vantage Pro2 or Vantage Vue station that uses transmitter ID 1.
If you wish to change this default transmitter ID:
1. Press the < and > keys to select a transmitter ID.
When you select a transmitter ID (1 - 8), the ID number is displayed on the screen as well
as its current configuration (OFF, VUE ISS, VP2 ISS or WIND).
2. Press the + or - keys to toggle console reception of signals from transmitters using that ID
on and off.
Note: Make sure any unused ID numbers are set to OFF.
To change the station type for the transmitter ID:
1. Press GRAPH to change the type of station assigned from VUE ISS to VP2 ISS or WIND.
VUE ISS - Refers tot the Vantage Vue ISS (whether direct transmission or retransmis-
sion from another console).
VP2 ISS - Refers to the Vantage Pro2 ISS (whether direct transmission or retransmis-
sion from another console).
WIND - Refers to an optional Anemometer Transmitter Kit (direct transmission only).
2. Press DONE to move to the next screen.
Note: This screen contains functionality for enabling repeaters. If the word “Repeater” displays in the
right corner of the screen and you are not using repeaters as part of your network, see “Clearing
Repeater ID” on page 51. If you are using repeaters as part of your network see “Wireless
Repeater Configuration” (Appendix C) on page 51.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Davis VANTAGE VUE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Davis VANTAGE VUE in the language / languages: English as an attachment in your email.

The manual is 6,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Davis VANTAGE VUE

Davis VANTAGE VUE Installation Guide - English - 16 pages

Davis VANTAGE VUE Quick start guide - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info