535608
15
Zoom out
Zoom in
Previous page
1/28
Next page
Scanning Modes
Quick Reference Guide 9
Wand Emulation Interface
To use a Wand Emulation interface, scan the bar code below.
Select WAND
Scanning Modes
If the interface type is changed, scanner configuration may automati-
cally reset to a different Scanning Mode.
The reader can operate in one of several scanning modes:
Trigger Single —
When the trigger is pulled, scanning is activated until one of the following
occurs:
- a programmable duration
1
has elapsed
- a label has been read
- the trigger is released
This mode is associated with typical handheld reader operation: when the trigger is pulled,
scanning starts and the product scans until the trigger is released, or a label is read, or the
maximum programmable duration1 has elapsed.
Trigger Hold Multiple —
When the trigger is pulled, scanning starts and the product scans
until the trigger is released or a programmable duration
1
has elapsed. Reading a label does
not disable scanning. Double Read Timeout
2
prevents undesired multiple reads while in
this mode.
Trigger Pulse Multiple —
When the trigger is pulled and released, scanning is activated un-
til programmable duration1 has elapsed or the trigger has been pulled again to transition to
another state. Double Read Timeout
2
prevents undesired multiple reads while in this mode.
Flashing —
The reader flashes
3
on and off regardless of the trigger status.
Always On —
No trigger pull is required to read a bar code. Scanning is continually on.
Double Read Timeout
4
prevents undesired multiple reads while in this mode.
Hands-Free Mode —
No trigger pull is required to read a bar code. Scanning is turned on
automatically when an item is placed in reader’s field of view. If the trigger is pulled, the
reader acts as if in Trigger Single mode. Double Read Timeout prevents undesired multiple
reads while in this mode.
NOTE
1. See the Product Reference Guide (PRG) for additional programmable features, such as Scanning Active Time.
2. Double Read Timeout is also programmed using the PRG.
3. Controlled by Flash On Time and Flash Off Time. Use the PRG to program these options.
4. Double Read Timeout is programmed using the PRG.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Datalogic Touch TD1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Datalogic Touch TD1100 in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Datalogic Touch TD1100

Datalogic Touch TD1100 User Manual - English - 332 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info