535589

Datalogic QuickScan QD24XX Manual

25
Zoom out
Zoom in
Previous page
1/282
Next page
Product Reference Guide 15
Chapter 3
Configuration Using Bar Codes
This and following sections provide programming bar codes to configure your reader by changing the default
settings. For details about additional methods of programming, see "Configuration Me
thods" on page 4.
You must first enable your reader to read bar codes in order to use this section. If you have not
done this, go to
Setup, starting on page 5
and complete the appropriate procedure.
Configuration Parameters
Once the reader is set up, you can change the default parameters to meet your application needs. Refer to "Standard
Defaults" starting on page 24
5 for initial configuration in order to set the default values and select the interface for
your application.
The following configuration parameters are divided into logical groups, makin
g
it easy to find the desired function
based on its reference group.
Interface Configuration:
• "RS-232/USB-Com Interfaces" on page 24
• "Keyboard Settings" on page 33
Parameters common to all interface applications:
• "Data Format" on page 47 gives options to control the messages sent to the Host system.
• "Reading Parameters" on page 61 control various operating modes and indicators status functioning.
Symbology-specific parameters:
• "1D Symbologies" on page 81 provides configuration of a personalized mix of 1D codes, code families and
their options.
• "2D Symbologies" on page 173 provides configuration of a personalized mix of 2D codes, code families and
their options.
You must first enable your reader to read bar codes in order to use this section. If you have not
done this, go to
Setup, starting on page 5
and complete the appropriate procedure.
To program features:
1. Scan the ENTER/EXIT PROGRAMMING bar code, available at the top of each programming page, when
applicable.
2. Scan the bar code to set the desired programming featur
e. You may need to cover unused bar codes on the
page, and possibly the facing page, to ensure that the reader reads only the bar code you intend to scan.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Datalogic QuickScan QD24XX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Datalogic QuickScan QD24XX in the language / languages: English as an attachment in your email.

The manual is 8,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info