Manual Datalogic QuickScan QD2430 (page 27 of 48) (English)

535590

Zoom out

Zoom in

1/48

Operating Modes

Quick Reference Guide 23

Pick Mode

Specifies the ability of the reader to decode labels only when

they are close to the center of the aiming pattern, which is the

area indicated by the two blue arrows. Pick Mode is a Decod-

ing and Transmission process where bar codes that are not

within the configurable distance from the center of the aiming

pattern are not acknowledged or transmitted to the host. It is

active only while the scanner is in Trigger Single mode. If the

scanner switches to a different Read Mode, Pick Mode is au-

tomatically disabled.

Multiple Label Reading

The reader offers a number of options for multiple label read-

ing. See the PRG or software configuration tool for descrip-

tions of these features and programming labels.

This feature is not compatible with Multiple Labels

Reading in a Volume. See the PRG for more infor-

mation.

ENTER/EXIT PROGRAMMING MODE



PIck Mode = Disable

Pick Mode = Enable

I am using QD 2430 with L18ER rs 232 Communication.
After Power cycle once it will scan after that it will start the blinking and not scan other barcode to scan it need to take again power cycle. Submitted on 24-1-2020 at 16:46
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Datalogic QuickScan QD2430 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Datalogic QuickScan QD2430 Manual

Product: