Manual Datalogic QuickScan Lite QW2100 (page 23 of 24) (Turkish)

535598

Zoom out

Zoom in

1/24

QuickScan

Lite QW2100

Genel Amaçlı Kablolu

Eltipi Lineer Imager Barkod Okuyucu

Kullanım Klavuzu

Datalogic ADC, Inc.

959 Terry Street

Eugene, OR 97402

USA

Telephone: (541) 683-5700

Fax: (541) 345-7140

dures described therein may be reproduced or transmitted in any form or by any means without prior

written permission of Datalogic ADC, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic ADC”).

Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and

transmit this documentation for the purchaser's own internal business purposes. Purchaser shall not

remove or alter any proprietary notices, including copyright notices, contained in this documentation

and shall ensure that all notices appear on any reproductions of the documentation.

Should future revisions of this manual be published, you can acquire printed versions by contacting

your Datalogic representative. Electronic versions may either be downloadable from the Datalogic web-

site (www.datalogic.com) or provided on appropriate media. If you visit our website and would like to

make comments or suggestions about this or other Datalogic publications, please let us know via the

"Contact Datalogic" page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this manual that is complete and

accurate, however, Datalogic reserves the right to change any specification at any time without prior

notice.

Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries,

including the U.S.A. and the E.U. All other brand and product names may be trademarks of their respec-

tive owners.

QuickScan is a registered trademark of Datalogic ADC, Inc. in many countries, including the U.S.A. and

the E.U. Autosense is a registered trademark of Datalogic ADC, Inc. in the U.S.

This product may be covered by one or more of the following patents:

Design Patents: CN ZL201230049587.7; EP1987843; USD677258.

Utility Patents: EP0789315B1; EP1128315B1; EP1396811B1; EP1413971B1; US5481098; US5992740; US6098883;

US6454168; US6561427; US6758403; US6808114; US6997385; US7387246; US7506816.

Additional patents pending

Kullanım Klavuzu 1

QUICKSCAN

ÜRÜN SERİSİ SON KULLANICI LİSANS SÖZLEŞMESİ

Datalogic ADC, Inc.

QUICKSCAN

PRODUCT SERIES END USER LICENSE AGREEMENT

Notice to End User: The Datalogic Product you have acquired contains embedded Software,

which is integral to the product's operation. This Software is being provided to you under li-

cense, subject to the terms and conditions of this Agreement. If you use the Datalogic Prod-

uct, you will be deemed to have accepted the terms and conditions of this Agreement. If you

do not intend to be bound to the terms of this Agreement, Datalogic is not willing to license

the Software to you, you may not use the Datalogic Product or the Software, and you must

contact the party from whom you acquired the Datalogic Product for instructions.

This End User Software License Agreement ("Agreement") is a legally binding agreement governing

the licensing of the Software and Documentation by Datalogic ADC, Inc. and its Affiliates ("Datalog-

ic") to the entity or person who has purchased or otherwise acquired a Datalogic Product ("End Us-

er"). For purposes of this Agreement, any software that is associated with a separate end-user

license agreement is licensed to you under the terms of that license agreement. Datalogic and End

User hereby agree as follows:

1. Definitions.

1.1 "Affiliate" means a business entity currently existing or later acquired that controls, is controlled by, or

is under common control with Datalogic S.p.A.

1.2 "Documentation" means materials such as user's guides, program reference guides, quick reference

guides, manuals, or similar materials associated with or related to the Datalogic Product, whether in

printed, "online", or other form.

1.3 "Proprietary Information" means: (a) source code, object code, software, documentation, and any

related internal design, system design, data base design, algorithms, technology, technical data or

information, implementation techniques, and trade secrets related to the Software, (b) any other

trade secrets marked appropriately or identified as proprietary or confidential, and (c) any informa-

tion that End User, under the circumstances, should recognize as confidential. Proprietary Informa-

tion does not include any information that the receiving party can establish was (1) in the public

domain, (2) already in the receiving party's possession or rightfully known prior to receipt, (3) right-

fully learned from a third party not in violation of any other's proprietary rights, or (4) indepen-

dently developed without access to Proprietary Information.

1.4 "Datalogic Product" means the Datalogic

Quickscan

series scanner product, including all

embedded Software in and all Documentation related to such product, which has been purchased or

otherwise acquired by End User, whether obtained directly or indirectly from Datalogic.

1.5 "Software" means any software or computer programs of Datalogic or its third party licensors in

machine readable form which is embedded in the Datalogic Product, whether obtained directly or

indirectly from Datalogic, including any replacement, update, upgrade, enhancement or modifica-

tion.

2. Scope Of License Granted.

2.1 Datalogic grants to End User a non-exclusive, non-transferable, perpetual license to use the Software,

solely on the Datalogic Product in which it is embedded ("designated Datalogic Product"), in

machine-readable form only, solely for End User's internal business purposes. This Agreement does

not convey ownership of the Software to End User. Title to the Software shall be and remain with

Datalogic or the third party from whom Datalogic has obtained a licensed right. As used in this

Agreement, the term "purchase" or its equivalents when applied to the Software shall mean "acquire

under license." End User is not entitled to receipt or use of the source code to any Software.

2.2 End User shall not copy, modify, decompile, disassemble, reverse engineer, or otherwise reproduce

or remanufacture the Software, whether modified or unmodified, nor sell, assign, sublicense, distrib-

ute, lend, rent, give, or otherwise transfer the Software to any other person or organization, for pur-

poses other than as expressly provided in this Agreement, without Datalogic's prior written consent.

3. Transfers, Support.

3.1 Any copying, installing, reproduction, remanufacture, reverse engineering, electronic transfer, or

other use of the Software on other than the designated Datalogic Product will be a material breach

of this Agreement. However, Datalogic may elect not to terminate this Agreement or the granted

licenses, but instead may elect to notify End User that End User is deemed to have ordered and

accepted a license for each breaching use. End User shall pay Datalogic the applicable list price for

such licenses as of the date of such breach.

3.2 End User shall not sell, assign, sublicense, distribute, lend, rent, give, or otherwise transfer the Data-

logic Product to any third party unless such third party agrees with Datalogic in writing to be bound

by the terms and conditions of this Agreement. Any such transfer of the Datalogic Product absent

such agreement shall be null and void.

3.3 End User may obtain support for Software from Datalogic at Datalogic's standard support fees and

under Datalogic's standard support terms and conditions in effect at the time the support is

requested.

4. Intellectual Property.

End User acknowledges that the Software constitutes valuable trade secrets of Datalogic or Data-

2QuickScan

Lite QW2100

logic's third party licensors and that the Software is protected by intellectual property laws and

treaties. The license set forth in this Agreement does not transfer to End User any ownership of Dat-

alogic's or its third party licensors' copyrights, patents, trademarks, service marks, trade secrets, or

other intellectual property rights and End User shall have no right to commence any legal actions

to obtain such rights. End User shall not remove, modify, or take any other action that would ob-

scure any copyright, trademark, patent marking, or other intellectual property notices contained in

or on the Datalogic Product.

5. Proprietary Information.

5.1 End User acknowledges that Proprietary Information is the confidential, proprietary, and trade

secret property of Datalogic and Datalogic's third party licensors and End User acquires no right or

interest in any Proprietary Information.

5.2 End User shall not disclose, provide, or otherwise make available the Proprietary Information of

Datalogic or its third party licensors to any person other than End User's authorized employees or

agents who are under confidentiality agreement, and End User shall not use the Proprietary Infor-

mation other than in conjunction with use of the Datalogic Product exclusively for End User's inter-

nal business purposes. End User shall take steps to protect the Proprietary Information no less

securely than if it were End User's own intellectual property.

5.3 The provisions of this Proprietary Information Section shall survive and continue for five (5) years

after the termination of this Agreement.

6. Limited Warranty.

6.1 Datalogic warrants that, under normal use and operation, the Datalogic Product will conform sub-

stantially to the applicable Documentation for the period specified in the Documentation. During

this period, for all reproducible nonconformities for which Datalogic has been given written notice,

Datalogic will use commercially reasonable efforts to remedy nonconformities verified by Datalogic.

End User agrees to supply Datalogic with all reasonably requested information and assistance neces-

sary to help Datalogic in remedying such nonconformities. For all defects reported to Datalogic

within the warranty period, Datalogic's liability is limited to providing End User with one copy of

corrections or responding to End User's problem reports according to Datalogic's standard assis-

tance practices. Datalogic does not warrant that the product will meet End User's requirements or

that use of the product will be uninterrupted or error free, or that Datalogic's remedial efforts will

correct any nonconformance. This limited warranty does not cover any product that have been sub-

jected to damage or abuse, whether intentionally, accidentally, or by neglect, or to unauthorized

repair or unauthorized installation, and shall be void if End User modifies the product, uses the

product in any manner other than as established in the Documentation, or if End User breaches any

of the provisions of this Agreement.

6.2 EXCEPT AS PROVIDED IN THIS AGREEMENT, THE DATALOGIC PRODUCT IS PRO-

VIDED "AS IS" AND DATALOGIC MAKES NO WARRANTIES OF ANY KIND, EXPRESS

OR IMPLIED, WRITTEN OR ORAL, WITH RESPECT TO THE PRODUCT, AND SPECIF-

ICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FIT-

NESS FOR A PARTICULAR PURPOSE.

7. Infringement.

7.1 Datalogic will defend End User against any claim in a lawsuit that the Datalogic Product furnished

hereunder infringe a United States patent or copyright of a third party and Datalogic will pay any

damages finally awarded against End User by a court of competent jurisdiction that are attributable

to such claim or will pay End User's part of any settlement that is attributable to such claim, pro-

vided, that 1) End User notifies Datalogic promptly in writing of the claim, 2) Datalogic controls

the defense or settlement of the claim, and 3) End User cooperates fully with Datalogic in such

defense or settlement. All notices of a claim should be sent to Datalogic ADC, Inc., Legal Depart-

ment, 959 Terry Street, Eugene, OR 97402.

7.2 In the defense or settlement of any such claim, Datalogic may, at its option, 1) procure for End User

the right to continue using the Datalogic Product, 2) modify the Datalogic Product so that it

becomes non-infringing, 3) replace the Datalogic Product with an equivalent product not subject to

such claim, or 4) provide End User an opportunity to return the Datalogic Product and receive a

refund of the purchase price paid, less a reasonable allowance for use.

7.3 Datalogic shall have no liability to End User for claims of infringement based upon 1) the use of any

Datalogic Product in combination with any product which Datalogic has not either furnished or

authorized for use with such Datalogic Product 2) the use of any Datalogic Product designed, man-

ufactured, or modified to the specifications of End User, or 3) End User's modification of the Data-

logic Product without written authorization from Datalogic.

7.4 THE FOREGOING STATES DATALOGIC'S COMPLETE AND ENTIRE OBLIGATION

CONCERNING CLAIMS OF PATENT, COPYRIGHT, OR OTHER INTELLECTUAL

PROPERTY INFRINGEMENT, CANCELS AND SUPERCEDES ANY PRIOR AGREE-

MENTS, WHETHER ORAL OR WRITTEN, BETWEEN THE PARTIES CONCERNING

SUCH CLAIMS, AND WILL NOT BE MODIFIED OR AMENDED BY ANY PAST, CON-

TEMPORANEOUS, OR FUTURE AGREEMENTS OR DEALINGS BETWEEN THE PAR-

TIES, WHETHER ORAL OR WRITTEN, EXCEPT AS SET FORTH IN A FUTURE

WRITING SIGNED BY BOTH PARTIES.

Kullanım Klavuzu 3

8. Limitation Of Liability.

EXCEPT AS PROVIDED IN SECTION 7, DATALOGIC SHALL NOT BE LIABLE FOR ANY CLAIMS AGAINST

END USER BY ANY OTHER PARTY. IN NO EVENT SHALL DATALOGIC'S LIABILITY FOR DAMAGES, IF

ANY, WHETHER BASED UPON CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,

STRICT LIABILITY, WARRANTY, OR ANY OTHER BASIS, EXCEED THE PRICE OR FEE PAID BY END USER

FOR THE DATALOGIC PRODUCT. UNDER NO CIRCUMSTANCES SHALL DATALOGIC BE LIABLE TO

END USER OR ANY THIRD PARTY FOR LOST PROFITS, LOST DATA, INTERRUPTION OF BUSINESS OR

SERVICE, OR FOR ANY OTHER SPECIAL, CONSEQUENTIAL, CONTINGENT, INDIRECT, INCIDENTAL,

PUNITIVE, EXEMPLARY, OR OTHER SIMILAR DAMAGES, EVEN IF DATALOGIC HAS BEEN ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES.

9. Government Restricted Rights; International Use.

9.1 Use, duplication, or disclosure of the Software by the U.S. Government is subject to the restrictions

for computer software developed at private expense as set forth in the U.S. Federal Acquisition Reg-

ulations at FAR 52.227-14(g), or 52.227-19 or in the Rights in Technical Data and Computer Soft-

ware clause at DFARS 252.227-7013(c)(1)(ii), whichever is applicable.

9.2 If End User is using the Datalogic Product outside of the United States, End User must comply with

the applicable local laws of the country in which the Datalogic Product is used, with U.S. export

control laws, and with the English language version of this Agreement. The provisions of the

"United Nations Convention on International Sale of Goods" shall not apply to this Agreement.

10. Termination.

10.1 Either party may terminate this Agreement or any license granted under this Agreement at any time

upon written notice if the other party breaches any provision of this Agreement.

10.2 Upon termination of this Agreement, End User immediately shall cease using any nonembedded

software and shall return to Datalogic or destroy all non-embedded software covered by this Agree-

ment, and shall furnish Datalogic with a certificate of compliance with this provision signed by an

officer or authorized representative of End User. For embedded software, End User agrees to sign a

waiver prepared by Datalogic concerning further use of the embedded Software. End User's resumed

or continued use of the embedded Software after termination shall constitute End User's agreement

to be bound by the terms and conditions of this Agreement for such use.

11. General Provisions.

11.1 Entire Agreement; Amendment. This document contains the entire agreement between the parties

relating to the licensing of the Software and supersedes all prior or contemporaneous agreements,

written or oral, between the parties concerning the licensing of the Software. This Agreement may

not be changed, amended, or modified except by written document signed by Datalogic.

11.2 Notice. All notices required or authorized under this Agreement shall be given in writing, and shall

be effective when received, with evidence of receipt. Notices to Datalogic shall be sent to the atten-

tion of Contract Administration, Datalogic ADC, Inc., 959 Terry Street, Eugene, OR 97402, or

such other address as may be specified by Datalogic in writing.

11.3 Waiver. A party's failure to enforce any of the terms and conditions of this Agreement shall not pre-

vent the party's later enforcement of such terms and conditions.

11.4 Governing Law; Venue: This Agreement and the rights of the parties hereunder shall be governed by

and construed in accordance with the laws of the State of Oregon U.S.A, without regard to the rules

governing conflicts of law. The state or federal courts of the State of Oregon located in either Mult-

nomah or Lane counties shall have exclusive jurisdiction over all matters regarding this Agreement,

except that Datalogic shall have the right, at its absolute discretion, to initiate proceedings in the

courts of any other state, country, or territory in which End User resides, or in which any of End

User's assets are located.

11.5 Attorneys' Fees. In the event an action is brought to enforce the terms and conditions of this Agree-

ment, the prevailing party shall be entitled to reasonable attorneys' fees, both at trial and on appeal.

- END -

-SON-

4QuickScan

Lite QW2100

Yazılım Ürün Politikası

Datalogic ürünleri ile birlikte yazılım / cihaz yazılımının mevcut en son

sürümünü sevk etme hakkını saklı tutar. Bu müşterilerimize Datalo-

gic’in en son yazılım teknolojisi ile sağlanır.

Bu politikadaki tek istisna eğer alıcının Datalogic ile imzalanmış yazılım

/ cihaz yazılımı değişikliklerini alıcının ürün sevkiyatları sırasında yapıla-

cağını açıkça belirten kayıt ve koşulların yeraldığı bir sözleşmesi var ise

mümkündür.

Yazılım Desteğindeki Müşteriler

Datalogic Yazılım Bakım ve Destek Sözleşmesi imzalamaya hak kazanan

müşteriler aşağıdakiler için 30 gün önceden bilgilendirilirler: (1) yeni bir

yazılım sürümünün piyasaya sunulması ; ve/veya (2) herhangi bir eski ya-

zılım sürümüne desteğin kaldırılacağı bilgisi. Datalogic müşterilerin bir

sonraki yazılım sürümüne geçişlerine yardımcı olmak üzere ücreti karşı-

lığında bakım verecektir. Eğer müşteri piyasadan kalkmış bir sürümü ha-

len kullanıyor ise daha üst sürümlerden seçeceği birine geçebilir, tabi ki

kullanılan donanıma bağlı olarak.

Yazılım Bakım ve Destek Sözleşmesi yapmak için lütfen Datalogic satış

temsilcinize başvurunuz.

Elleri Serbest Bırakan Ayak / Tutucu

Okuyucuyu ürünleri eller serbest olarak okutabilme-

ye izin veren uygun bir açıyla tutabilme için bir akse-

suvar mevcuttur. Bu ayrıca tutucu olarak da

kullanılabilir. Resim 1’de gösterildiği gibi ayağın ko-

lunu yükseltmek için her iki yanındaki düğmelere

herzaman basılı tutun, aksi takdirde kilitleme meka-

nizmasını bozabilirsiniz. Ayağın kendisini resimde

gösterildiği gibi üç değişik pozisyonda konumlandıra-

bilirsiniz.

Okuyucuyu ayaklı olarak kullanabilmek üzere programlama konusunda

bilgi almak için Sayfa 12’deki Okutma Modları bölümüne bakınız.

Resim 1. Ayağın ayarlanması

Opsiyonel Duvar

Tutacağı

Kabloyu Takma / Çıkarma

Kullanım Klavuzu 5

Kabloyu Takma / Çıkarma

Sunucu Arayüzünü Bağlama

Klavye Emülasyon Arayüzü

RS-232 Arayüzü

USB Arayüzü

6QuickScan

Lite QW2100

Hedefle ve Okut

012345

65°

Okuyucunun Parçaları

Kullanım Klavuzu 7

Okuyucunun Parçaları

1. LED 3. Okuma Penceresi

2. Kablo Çıkarma Deliği 4. Tetik

8QuickScan

Lite QW2100

Programlama Barkodları

Kullanım kolaylığı açısından, bu klavuz okuyucunun değişik

Arayüz tiplerini (terminal/sunucu) kullanmak üzere okuyucuyu yapılan-

dırmak için gerekli programlama barkodlarını içerir.

Programlama ve yapılandırılabilen özellikler hakkında daha fazla bilgi al-

mak için Ürün Referans Kitağçığına (PRG) bakınız.

PRG’nin son versiyonunu ve okuyucunun diğer dökümanları,

bu klavuzun arka kapağında listelenen web sitelerinden indirebilirsiniz.

Standart Ürün Ayarlarına Geri Dönme

Okuyucunuzda hangi programlama seçeneklerinin olduğundan emin

değilseniz, veya bazı değişiklikler yapmış ve fabrika ayarlarına dönmek is-

tiyorsanız, aşağıdaki Fabrika Ayarları barkodunu okutunuz. Bu,

mevcut aktif arayüz için mevcut konfigürasyona fabrika yapılandırma-

sını kopyalayacaktır.

Fabrika Ayarları

Sunucu Arayüzleri

NOT:

Kablolar sistem konfigürasyonuna

bağlı olarak değişebilirler.

Bazı arayüzler okuyucunun elek-

triğe bağlıyken kapalı konumunda

başlamasını gerektirir. Eğer bu

konumdayken ek okuyucu konfi-

gürasyonu istenir ise, tetiği çekin

ve beş saniye basılı tutun. Okuyucu

barkodlar ile programlamaya elve-

rişli bir konuma dönecektir.

Programlama Barkodları

Kullanım Klavuzu 9

RS-232 Arayüzü

Bir RS-232 arayüzü kullanmak için, isteğinize göre barkodu okutunuz.

RS-232 Standard

RS-232 Wincor Nixdorf

RS-232 OPOS (OPOS/UPOS/JavaPOS) ile kullanım için

10 QuickScan

Lite QW2100

USB Arayüz

Okuyucu doğrudan USB sunucuya, veya elektrik beslemeli USB hub’a

bağlanır ki elektriğini oradan alsın. Ek güç adaptör gerekmez. USB ara-

yüzü kullanırken, okuyucu otomatik olarak USB ve varsayılanlarını USB

klavye arayüzüne tanımlar.

USB-COM-STD

(RS-232 standart arayüzünü simüle eder)

USB Klavye (standart anahtar kod çözme ile)

USB İkincil Klavye (ikincil anatar kod çözme ile)

USB OEM

1. www.datalogic.com adresinden doğru USB Com sürücüyü

indirin.

Programlama Barkodları

Kullanım Klavuzu 11

Klavye Emülasyonu Arayüzü

Klavye Emülasyonu Arayüzü’nü kullanmak için, istenilen klavye tipine

ait barkodu okutun

KBD-AT

(AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95

Standart Tuş Çözme ile)

KBD-AT-NK

(IBM AT PS2 standart tuş çözme ile ama harici klavye olmadan)

KBD-AT-ALT

(AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95

Alternatif Tuş ile)

KBD-AT-ALT-NK (IBM AT PS2 için alternatif tuş çözme ile

ama harici klavye olmadan

KBD-XT (PC/XT Standart Tuş Çözme ile)

12 QuickScan

Lite QW2100

Okutma Yöntemleri

Okuyucu aşağıdaki birden fazla okutma modunda çalışabilir:

Bir Kez Tetikleme —

Tetiğe basıldığında, aşağıdakilerden biri oluşana kadar

okuyucu aktif kalır :

- programlanabilir bir süre

geçmişse

- bir etiket okutulmuşsa

- tetik düşmüşse

Bu yöntem tipik el okuyucusu operasyonu ile ilgilidir: Tetiğe basıldığın-

da, okutma başlar ve tetik bırakılana kadar, veya bir etiket okutulunca,

veya maksimum programlanabilir

süre geçene kadar ürün okutulur.

Sürekli Tetikleme —

Tetiğe basıldığında, okutma başlar ve tetik bırakılana

kadar, veya programlanabilir

süre geçene kadar ürün okutulur. Etiketin

okutulması okutmayı geçersiz kılmaz. Bu yöntemde Çift Okuma Süre

Aşımı

istenmeyen birden fazla okutmayı önler.

Arka Arkaya Tetikleme —

Tetiğe basılıp bırakıldığında, Programlanabilir

süre geçene kadar, veya başka bir duruma geçmek üzere tetiğe tekrar ba-

sıldığında okutma aktif olur. Bu yöntemde Çift Okuma Süre Aşımı

is-

tenmeyen birden fazla okutmayı önler.

Flaşa Geçme —

Okuyucu tetik durumunu dikkate almadan flaşa

geçer ve

durur.

Herzaman Açık —

Barkodu okutmak için tetiğe basmaya gerek yoktur.

Okutma sürekli açıktır. Bu yöntemde Çift Okuma Süre Aşımı

istenme-

yen birden fazla okutmayı önler.

Autosense® Bekleme Modu —

Barkodu okutmak için tetiğe basmaya gerek

yoktur. Okutma herhangi bir cisim okuyucunun görüş alanına girince

otomatik olarak başlar. Tetiğe basıldığında, okuyucu Bir Kez Tetikleme

modundaymış gibi hareket eder. Bu yöntemde Çift Okuma Süre Aşımı

istenmeyen birden fazla okutmayı önler.

Tetik Cisim Algılama —

Bu yöntem Autosense® Bekleme Modu’na çok ben-

zer ancak tek farkla, dekoder’i aktif hale getirebilmek için tetiğe basmak

gerekir.

NOT:

Eğer arayüz tipi değiştirilmiş ise, okuyucu

konfigürasyonu otomatik olarak değişik bir

okutma moduna ayarlanmış olabilir.

1. Ek programlama özellikleri için Ürün Klavuzuna Bakınız (PRG),

bu durumda : Okutma Aktif Zamanı

2. Çift Okuma Süre Aşımı Ürün Klavuzu (PRG) kullanarak prog-

ramlanabilir.

3. Flash On Zamanı ve Flash Off Zamanı tarfından kontrol edilir.

Bu seçenekleri programlayabilmek için PRG’yi kullanın.

4. Çift Okuma Süre Aşımı Ürün Klavuzu kullanarak programlana-

bilir.

5. Çift Okuma Süre Aşımı Ürün Klavuzu kullanarak programlana-

bilir.

Okutma Yöntemleri

Kullanım Klavuzu 13

Okutma Modu = Bir Kez Tetikleme

Okutma Modu = Sürekli Tetikleme

Okutma Modu = Arka Arkaya Tetikleme

Okutma Modu = Flaşa Geçme

Okutma Modu = Herzaman Açık

Okutma Modu = Autosense® Bekleme Modu

Okutma Modu = Tetik Cisim Algılama

14 QuickScan

Lite QW2100

Sorun Giderme

Sorun Olası Neden Olası Çözüm

Tetiğe basınca

Hiçbirşey olmuyor

Okuyucunun elek-

triği yok

Sistem elektriğini kon-

trol edin. Elektriğin

bağlı olduğunu teyid

edin.

Arayüz veya elek-

trik kabloları

gevşek

Tüm kablo bağlantıları-

nın takılı olduğunu

teyid emin olun

LED yanıyor ama

barkod çözümlene-

miyor

Okuyucu doğru

barkod tipi için

programlanmamış

Okuyucunun okutulan

barkod tipini okumaya

programlandığından

emin olun. Daha fazla

bilgi için PRG’ye başvu-

run.

Barkod etiketi oku-

namıyor

Etiketinin bozuk olma-

dığından emin olun.

Başka bir barkod tipini

okutmayı deneyin.

Okuyucu ile

barkod arasındaki

mesafe doğru

değil.

Okuyucuyu barkoda

yaklaştırın veya uzak-

laştırın.

Barkod okuma

Kabiliyeti bozulmuş

Okuma penceresi

kirlenmiş.

Pencereyi yumuşak,

düz ve su ile nemlendi-

rilmiş bir bezle temizle-

yin.

Barkod okundu ama

sunucuya iletilmedi

Okuyucu doğru

sunucu tipine göre

programlanmamış

Uygun sunucu tipi bar-

kodunu okutun. Daha

fazla bilgi için (PRG)’ ye

başvurun.

NOT:

Detaylı hata giderme için,

Ürün Klavuzu (PRG)’na başvu-

runuz.

LED ve Beeper Göstergeleri

Kullanım Klavuzu 15

LED ve Beeper Göstergeleri

Okuyucunun beeper’ını duyunca LED’i yanar ve okuyucu üzerindeki

çeşitli fonksiyon veya arızaları gösterir. Ayrıca iyi okuma bildirimi

için bir “Green Spot” yanar. Aşağıdaki tablolar bu göstergeleri listeler.

Aşağıdaki tablolarda listelenen davranışlardan bir istisna ise okuyucu

Fonksiyonları programlanabilir ve devreye alınabilirde alınamazda.

Örneğin, elektriği açma bipi gibi bazı göstergeler,programlama etiketleri

kullanılarak devre dışı bırakılabilir. Daha detaylı liste için

Ürün Kullanım Klavuzu (PRG)’na başvurun.

Gösterge LED Beeper

Power-up

Power-up da LED flash’a

geçer/yanar söner, fakat

bunu göz göremez.

Bir USB arayüz ile LED

sunucu ile işlem

tamamlanana kadar

yanıp söner.

Okuyucu en üst fre-

kanstan 4 kez bipler ve

power-up yapar.

İyi Okuma

Bu gösterge için LED

davranışı PRG kullanıla-

rak yapılandırılabilir.

Mevcut frekansta bir

bip,ses başarılı etiket

okutma sonrasında

mono/çift yönlü ton-

lama.

ROM Hatası

200ms açık / 200ms

kapalı

Okuyucu 200ms için

en yüksek sesten 1

hata bipi gönderir.

Sınırlı Okutma

Etiket Okutma

N/A

Okuyucu en yüksek

frekans- tan ve mevcut

sesten 6 kez çıvıltı sesi

çıkarır.

Okuyucu Devre

Dışı

LED sürekli olarak yanıp

söner 100mS kapalı/ 900

mS açık

N/A

16 QuickScan

Lite QW2100

Ergonomik Öneriler

• Tekrarlanan hareketi azaltın veya tamamen yok edin

• Doğal pozisyonunuzu koruyun

• Aşırı güç kullanmayın veya azaltın

• Sıkça kullandığınız cisimleri kolay ulaşılabilir mesafede tutun

• İşleri doğru yüksekliklerde yapın

• Titreşimi azaltın veya tamamen yok edin

• Doğrudan basıncı azaltın veya tamamen yok edin

• Ayarlanabilir iş istasyonları sağlayın

• Yeterli temizlik sağlayın

• Uygun çalışma ortamı sağlayın

• Çalışma prosedürlerini iyileştirin.

Düzenleyici Bilgi

Tüm modeller satıldıkları lokayonlardaki kural ve düzenlemelere

uygun olarak tasarlanmış ve etiketlenmiştir. Datalogic’in açıkça

belirtilmiş yazılı onayı olmadan bu cihazda değişiklik veya modi-

fikasyon yapmak bu cihazın kullanım yetkisini geçersiz kılabilir.

Güç Kaynağı

Sadece Datalogic tarafından bu ürün ve modelleri için onaylanan güç

kaynaklarını kullanınız. Modeller okuyucuya doğrudan güç sağlayan ve

modeline göre listelenmiş sınıf II veya III Kısıtlı Güç Kaynağına (LPS)

gereksinim duyar. Güvenlik sertifikasının geçerli olabilmesi için, sınıf III

güç kaynağı girişi IEC/EN60950-1 (EN60335-serisi, EN60065 veya

benzeri) onaylı olmalıdır.

Giriş: 100 - 240 VAC Çıkış: 5 VDC

Max Akım: 0.35 Amps Elektrik Çıkışı: 12.5 Watts

DİKKAT

Potansiyel ergonomik sakatlan-

maları önlemek veya minimuma

indirmek için aşağıdaki önerileri

takip ediniz.

Şirketinizin çalışanların yaralan-

masını önlemek üzere uygula-

dığı güvenlik programıyla bire

bir uyduğunuzu teyid etmek için

bulunduğunuz bölgedeki yerel

Sağlık Müdürlüğüne danışınız.

NOT:

USB “Power Off Terminal”

uygulamaları için sadece USB

1.0, 1.1 veya 2.0 portlu cihaza

bağlayınız.

Okuyucu Etiketlemesi

Kullanım Klavuzu 17

Radyo Frekans Kirliliği Talepleri

Bu cihaz test edildi ve B sınıfı dijital cihaz için kısıtlı

olarak FCC kuralları bölüm 15’e uygunluğu saptan-

dı. Bu kısıtlamalar kuruluş alanındaki zararlı parazit-

lere karşı makul bir koruma sağlamak üzere

tasarlanmıştır. Bu cihaz radyo frekans enerjisi üretir, kullanır ve yayabilir

ve, klavuzdaki talimatlara göre kurulmaz ve kullanılmaz ise, radyo haber-

leşmesinde zararlı parazite neden olur. Bununla birlikte, bir kuruluş

sırasında hiçbir parazit oluşmayacak diye bir garanti de yoktur. Eğer

bu cihaz radyo veya televizyon yayınında parazite neden olur ise, ki cihazı

kapatıp açarak bu anlaşılabilir, kullanıcının, paraziti düzeltmek için aşa-

ğıdaki ölçümlemelerden bir veya birkaçını denemesi önerilir:

• Alıcı anteninin yönünü veya yerini değiştirmek.

• Cihaz ile alıcı arasındaki bölmeyi arttırmak.

• Cihazı alıcının bağlı olduğu elektrik devresinden farklı bir devreye

ait prize bağlayın.

• Yardım için bayinizden yada deneyimli bir radyo/ televizyon teknis-

yeninden yardım isteyiniz.

Radyo Frekans Kirliliği Talepleri - Kanada

Bu, B sınıfı digital cihaz, Kanada IC-ES-003 ile uyumludur.

Cet appareil numérique de la classe B est conforme à la norme NMB-003

du Canada.

Okuyucu Etiketlemesi

Buradaki etiketler sadece yerlerini resimde belirtmek için gösterilmekte-

dir. Lütfen güncel detaylar için ürününüzün üzerindeki etiketlere bakı-

nız.

DİKKAT

Kullanıcı, uygunluktan sorumlu

tarafın açıkça belirtilmiş yazılı

onayı olmadan yapılacak deği-

şiklik veya modifikakasyonla-

rın cihazı geçersiz kılabileceği

konusunda uyarıldı.

Tested to comply

with FCC Standards

FOR HOME OR OFFICE USE

18 QuickScan

Lite QW2100

Garanti

Datalogic warrants to Customer that Datalogic's products will be free from defects in materials and workmanship

for a period of 3 years from product shipment.

Datalogic ADC Sınırlı Fabrika Garantisi

Datalogic ADC Limited Factory Warranty

Warranty Coverage

Datalogic ADC (“Datalogic”) hardware products are warranted against defects in

material and workmanship under normal and proper use. The liability of Datalogic

under this warranty is limited to furnishing the labor and parts necessary to remedy

any defect covered by this warranty and restore the product to its normal operating

condition. Repair or replacement of product during the warranty does not extend the

original warranty term. Products are sold on the basis of specifications applicable at

the time of manufacture and Datalogic has no obligation to modify or update prod-

ucts once sold.

If Datalogic determines that a product has defects in material or workmanship, Dat-

alogic shall, at its sole option repair or replace the product without additional charge

for parts and labor, or credit or refund the defective products duly returned to Dat-

alogic. To perform repairs, Datalogic may use new or reconditioned parts, compo-

nents, subassemblies or products that have been tested as meeting applicable

specifications for equivalent new material and products. Customer will allow Data-

logic to scrap all parts removed from the repaired product. The warranty period shall

extend from the date of shipment from Datalogic for the duration published by Dat-

alogic for the product at the time of purchase (Warranty period). Datalogic warrants

repaired hardware devices against defects in workmanship and materials on the re-

paired assembly for a 90 day period starting from the date of shipment of the repaired

product from Datalogic or until the expiration of the original warranty period,

whichever is longer. Datalogic does not guarantee, and it is not responsible for, the

maintenance of, damage to, or loss of configurations, data, and applications on the

repaired units and at its sole discretion can return the units in the “factory default”

configuration or with any software or firmware update available at the time of the

repair (other than the firmware or software installed during the manufacture of the

product). Customer accepts responsibility to maintain a back up copy of its software

and data.

Warranty Claims Process

In order to obtain service under the Factory Warranty, Customer must notify Data-

logic of the claimed defect before the expiration of the applicable Warranty period

and obtain from Datalogic a return authorization number (RMA) for return of the

product to a designated Datalogic service center. If Datalogic determines Customer’s

claim is valid, Datalogic will repair or replace product without additional charge for

parts and labor. Customer shall be responsible for packaging and shipping the prod-

uct to the designated Datalogic service center, with shipping charges prepaid. Data-

logic shall pay for the return of the product to Customer if the shipment is to a

location within the country in which the Datalogic service center is located. Custom-

er shall be responsible for paying all shipping charges, duties, taxes, and any other

charges for products returned to any other locations. Failure to follow the applicable

RMA policy, may result in a processing fee. Customer shall be responsible for return

shipment expenses for products which Datalogic, at its sole discretion, determines

are not defective or eligible for warranty repair.

Warranty Exclusions

The Datalogic Factory Warranty shall not apply to:

(i) any product which has been damaged, modified, altered, repaired or

upgraded by other than Datalogic service personnel or its authorized repre-

sentatives;

(ii) any claimed defect, failure or damage which Datalogic determines was

caused by faulty operations, improper use, abuse, misuse, wear and tear, neg-

ligence, improper storage or use of parts or accessories not approved or sup-

plied by Datalogic;

(iii) any claimed defect or damage caused by the use of product with any other

instrument, equipment or apparatus;

Okuyucu Etiketlemesi

Kullanım Klavuzu 19

(iv) any claimed defect or damage caused by the failure to provide proper mainte-

nance, including but not limited to cleaning the upper window in accor-

dance with product manual;

(v) any defect or damage caused by natural or man-made disaster such as but not

limited to fire, water damage, floods, other natural disasters, vandalism or

abusive events that would cause internal and external component damage or

destruction of the whole unit, consumable items;

(vi) any damage or malfunctioning caused by non-restoring action as for example

firmware or software upgrades, software or hardware reconfigurations etc.;

(vii) the replacement of upper window/cartridge due to scratching, stains or other

degradation and/or

(viii) any consumable or equivalent (e.g., cables, power supply, batteries, keypads,

touch screen, triggers etc.).

No Assignment

Customer may not assign or otherwise transfer its rights or obligations under this

warranty except to a purchaser or transferee of product. No attempted assignment or

transfer in violation of this provision shall be valid or binding upon Datalogic.

DATALOGIC'S LIMITED WARRANTY IS IN LIEU OF ALL OTHER WAR-

RANTIES, EXPRESS OR IMPLIED, ORAL OR WRITTEN, STATUTORY OR

OTHERWISE, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR

PURPOSE, OR NONINFRINGEMENT. DATALOGIC SHALL NOT BE LIA-

BLE FOR ANY DAMAGES SUSTAINED BY CUSTOMER ARISING FROM

DELAYS IN THE REPLACEMENT OR REPAIR OF PRODUCTS UNDER

THE ABOVE. THE REMEDY SET FORTH IN THIS WARRANTY STATE-

MENT IS THE CUSTOMER’S SOLE AND EXCLUSIVE REMEDY FOR

WARRANTY CLAIMS. UNDER NO CIRCUMSTANCES WILL DATALOG-

IC BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY LOST

PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL IN-DIRECT, SPE-

CIAL OR CONTINGENT DAMAGES REGARDLESS OF WHETHER DAT-

ALOGIC HAD ADVANCE NOTICE OF THE POSSIBILITY OF SUCH

DAMAGES.

Risk of Loss

Customer shall bear risk of loss or damage for product in transit to Datalogic. Dat-

alogic shall assume risk of loss or damage for product in Datalogic’s possession. In

the absence of specific written instructions for the return of product to Customer,

Datalogic will select the carrier, but Datalogic shall not thereby assume any liability

in connection with the return shipment.

20 QuickScan

Lite QW2100

NOTLAR

La presente dichiarazione di conformità è rilasciata sotto la responsabilità esclusiva di Datalogic ADC, Inc. per:

This Declaration of Conformity is issued under the sole responsibility of Datalogic ADC, Inc. for:

Cette déclaration de conformité est établie sous la seule responsabilité de Datalogic ADC, Inc:

Diese Konformitätserklärung wird unter der alleinigen Verantwortung des Datalogic ADC, Inc. erteilt für:

Esta declaración de conformidad se expide bajo la exclusiva responsabilidad de Datalogic ADC, Inc. para:

QuickScan Lite QW2100 Barcode Reader

sono conformi alle Direttive del Consiglio Europeo sottoelencate:

are in conformity with the requirements of the European Council Directives listed below:

sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous:

den nachstehenden angeführten Direktiven des Europäischen Rats:

cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:

2004/108/EC EMC Directive

2011/65/EC RoHS Directive (8 June 2011)

Basate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed alla sicurezza dei prodotti.

On the approximation of the laws of Member States relating to electromagnetic compatibility and product safety.

asée sur la législation des Etats membres relative à la compatibilité électromagnétique et à la sécurité des produits.

Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische Verträglichkeit und

Produktsicherheit entsprechen.

Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad electromagnética y

las Medidas de seguridad relativas al producto.

Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:

This declaration is based upon compliance of the products to the following standards:

Cette déclaration repose sur la conformité des produits aux normes suivantes:

Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:

Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:

EC-67

Rev.: 1

Pag.: 1 di 1

Datalogic ADC, Inc.

959 Terry St.

Eugene, OR 97402 USA

e tutti i suoi modelli

and all its models

et tous ses modèles

und seine Modelle

y todos sus modelos

EN 55022 (CLASS B ITE), SEPTEMBER 2006:

MMENDMENT A1: OCTOBER 2007

IMITS AND METHODS OF MEASUREMENTS OF RADIO DISTURBANCE

CHARACTERISTICS OF INFORMATION TECHNOLOGY EQUIPMENT

EN 55024, SEPTEMBER 1998:

MENDMENT A2, JUNE 2003

NFORMATION TECHNOLOGY EQUIPMENT- IMMUNITY CHARACTERIS-

TICS LIMITS AND METHODS OF MEASUREMENT

EN 60950-1, APRIL 2006

+A11:2009+A1:2010

INFORMATION TECHNOLOGY EQUIPMENT - SAFETY -

ART 1: GENERAL REQUIREMENTS

EN 50581, SEPT 2012 TECHNICAL DOCUMENTATION FOR THE ASSESSMENT OF ELECTRICAL

AND ELECTRONIC PRODUCTS WITH RESPECT TO THE RESTRICTION OF

HAZARDOUS SUBSTANCES

Eugene, Oregon USA, Updated March, 2013 Brad West

Vice President - Supply Chain Operation

DECLARATION OF CONFORMITY

www.datalogic.com 820036329 (Rev. B) April / 2013

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Datalogic QuickScan Lite QW2100 in the language / languages: Turkish as an attachment in your email.

The manual is 1,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Datalogic QuickScan Lite QW2100

Datalogic QuickScan Lite QW2100 User Manual - English - 324 pages

Datalogic QuickScan Lite QW2100 User Manual - English - 24 pages

Datalogic QuickScan Lite QW2100 User Manual - English - 44 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Datalogic QuickScan Lite QW2100 Manual

Product: