535585
170
Zoom out
Zoom in
Previous page
1/232
Next page
References
162 PowerScan™ M8500
Address Stamping
It is possible to include the reader address in the message sent to the host. The Reader
Address Stamping and the Cradle Address Stamping parameters consist of a 4-digit number in
the range 0000 to 1999.
For message output format, refer to "Message Formatting" starting on page 169
Address Delimiter
The Address Delimiter allows a character to be included to separate the reader Address
stamping field from the next field in the message. Any character can be included in the
hexadecimal range from 00 to FE.
For message output format, refer to "Message Formatting" starting on page 169.
Time Stamping Format
The Time Stamping parameter sets the format for hour and date information. It consists of
1 or 2 groups of numbers, each one made up of 6 decimal digits.
For example, setting the Hour/Minutes/Seconds/Month/Day/Year format, the information
17:
03:16 on June 12, 2009 will be formatted as
170316061209.
Time Stamping Delimiter
The Time Stamping Delimiter allows a character to be included to separate the Time
Stamping field from the next field in the message. Any character can be included in the
hexadecimal range from 00 to FE.
Reading Parameters
Trigger Signal
This mode determines how the reading phase is controlled when the hardware trigger
operating mode is selected:
trigger active level: the reader goes ON whe
n the trigger is pressed and goes OFF when
it is released
trigger active pulse: the reader goes ON at the first trigger press and goes OFF only at
a second pr
ess
Reads per Cycle
In general, a reading cycle corresponds to the ON + OFF times of a device.
The resulting effects of this parameter on code
reading depend on other related
configuration conditions. Here are the definitions of ON and OFF times.
For readers using the software trigger parameter (FL
ASH MODE), a reading cycle
corresponds to the flash on + flash off times. Code reading takes place during the flash
on time.
For readers using the har
dware trigger parameter, a reading cycle corresponds to a trig-
ger press (ON) + one of the following OFF events:
- trigger release (for trigger activ
e level)
- a second trigger press (for trigger active pulse)
170


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Datalogic PowerScan PM8500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Datalogic PowerScan PM8500 in the language / languages: English as an attachment in your email.

The manual is 6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Datalogic PowerScan PM8500

Datalogic PowerScan PM8500 User Manual - English - 44 pages

Datalogic PowerScan PM8500 User Manual - Spanish - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info