Manual Datalogic PowerScan PD9530 (page 44 of 346) (English)

535549

Zoom out

Zoom in

1/346

Enter/Exit Programming Mode

PowerScan™ PD9530/PBT9500/PM9500

ACK NAK Timeout Value

This option specifies the amount of time the reader waits for an ACK charac-

ter from the host following label transmissi

on. The selectable timeout range

is 200 milliseconds to 15,000ms (15 seconds) in 200ms increments. A

selection of 0 disables the timeout.

See page 260 for more information on setting this feature.

$CR2AT

Select ACK NAK Timeout Value Setting

To configure this feature, scan the ENTER/EXIT

PROGRAMMING MODE bar code above, then the bar

code at left followed by the digits from the Alphanu-

meric characters in

Appendix D, Keypad

repre-

senting your desired character(s). End by scanning

the ENTER/EXIT bar

code again.

Make a mistake? Scan the CANCEL bar code to abort

not save the entry string. You can then start

again at the beginning.

CANCEL

DEFAULT

01 ACK NAK Timeout value is 200ms

ACK NAK Retry Count

This feature specifies the number of times the reader retries a label trans-

mission due to a retry condition. The selectable

range is from 1 to 254

retries. A selection of 0 disables the count, and a selection of 255 specifies

unlimited retries. See page 261 for more information.

$CR2AR

Select ACK NAK Retry Count Setting

To configure this feature, scan the ENTER/EXIT

PROGRAMMING MODE bar code above, then the bar

code at left followed by the digits from the Alphanu-

meric characters in

Appendix D, Keypad

repre-

senting your desired character(s). End by scanning

the ENTER/EXIT bar

code again.

Make a mistake? Scan the CANCEL bar code to abort

not save the entry string. You can then start

again at the beginning.

CANCEL

DEFAULT

003 = 3 Retries

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Datalogic PowerScan PD9530 in the language / languages: English as an attachment in your email.

The manual is 9,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Datalogic PowerScan PD9530 Manual

Product: