535537

Datalogic PowerScan M8300 Manual

24
Zoom out
Zoom in
Previous page
1/32
Next page
PowerScan™ M8300 Readers
Industrial Handheld Laser Bar Code Reader
with Datalogic’s STAR Cordless System™
Quick Reference Guide
Datalogic ADC, Inc.
959 Terry Street
Eugene, OR 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
©2007-2014 Datalogic, Inc.
An Unpublished Work - All rights reserved. No part of the contents of this docu-
mentation or the procedures described therein may be reproduced or transmitted
in any form or by any means without prior written permission of Datalogic ADC,
Inc. or its subsidiaries or affiliates ("Datalogic" or "Datalogic ADC"). Owners of Data-
logic products are hereby granted a non-exclusive, revocable license to reproduce
and transmit this documentation for the purchaser's own internal business pur-
poses. Purchaser shall not remove or alter any proprietary notices, including copy-
right notices, contained in this documentation and shall ensure that all notices
appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed ver-
sions by contacting your Datalogic representative. Electronic versions may either
be downloadable from the Datalogic website (www.datalogic.com) or provided on
appropriate media. If you visit our website and would like to make comments or
suggestions about this or other Datalogic publications, please let us know via the
"Contact Datalogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual
that is complete and accurate, however, Datalogic reserves the right to change any
specification at any time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in
many countries, including the U.S.A. and the E.U. All other brand and product
names may be trademarks of their respective owners.
Patents
This product may be covered by one or more of the following patents:
Design Pat. AU 310201; AU 310202; CN 693980; CN735959; HK 0602013.5M001; HK
0602013.5M002; JP 1305693; KR 30-0460940; US D570,843 S; USD588,596 S.
US Pat. 5,992,740; 6,305,606 B1; 6,517,003; 6,808,114 B1; 6,997,385 B2; 7,387,246 B2;
5,367,151; 5,449,893; 5,545,889; 6,098,877; 6,220,514 B1; 6,412,698 B2; 6,607,132 B1;
6,817,529 B2; 6,834,805 B2; 7,948,214 B2.
European Pat. 789,315 B1; 895,175 B1; 1,128,314 B1; 1,128,315 B1; 1,396,811 B1;
1,413,971 B1; 1,816,585 B1; 1,942,442 B1.
Additional patents pending.
Table of Contents
Updates and Language Availability .............................................................. 1
Using PowerScan™ M8300 ............................................................................. 2
Scan Line Position .................................................................................. 2
Reading Angle ......................................................................................... 2
Aiming System ........................................................................................ 3
Charging the Batteries ................................................................................... 4
Battery Safety ......................................................................................... 5
Setup ........................................................................................................ 7
PowerScan™ M8300 Configuration ............................................................... 8
PowerScan™ M8300/BC-80X0 Point-to-Point Setup ......................... 8
PowerScan™ M8300/BC-80X0 Stand Alone Setup ............................. 9
Using Multiple Readers with Same Cradle ......................................... 11
PowerScan™ M8300/STAR-MODEM™ Stand Alone Setup ............... 11
PowerScan™ M8300/STAR-SYSTEM™ Setup ..................................... 12
PowerScan™ M8300 Default Configuration ................................................ 14
Technical Features ........................................................................................ 15
Reading Tables .............................................................................................. 16
Datalogic ADC Limited Factory Warranty ................................................... 17
Warranty Coverage ............................................................................... 17
Warranty Claims Process ..................................................................... 17
Warranty Exclusions ............................................................................. 18
No Assignment ..................................................................................... 18
Risk of Loss ........................................................................................... 18
Service and Support ...................................................................................... 19
Compliance .................................................................................................... 20
FCC Compliance ..................................................................................... 20
Radio Compliance ................................................................................. 20
Laser Safety Compliance ...................................................................... 20
LED CLASS ............................................................................................. 21
IC (Industry Canada) .............................................................................. 21
Power Supply ......................................................................................... 21
Brazilian Certification Statements ...................................................... 24
WEEE Compliance ................................................................................. 25
Numeric Table ............................................................................................... 26
NOTES
Quick Reference Guide 1
UPDATES AND LANGUAGE AVAILABILITY
UK/US
The latest drivers and documentation updates for this product are available on the
Datalogic website at www.datalogic.com.
I
Su Internet sono disponibili le versioni aggiornate di driver e documentazione di
questo prodotto. Collegarsi a : www.datalogic.com
F
Les versions mises à jour de drivers et documentation de ce produit sont disponibles
sur Internet. Cliquez sur : www.datalogic.com
D
Im Internet finden Sie die aktuellsten Versionen der Treiber und Dokumentation von
diesem Produkt. Adresse : www.datalogic.com
E
En Internet están disponibles las versiones actualizadas de los drivers y
documentación de este producto. Dirección Internet : www.datalogic.com
Using PowerScan™ M8300
2PowerScan™ M8300
USING POWERSCAN
™
M8300
The PowerScan
™
M8300 series readers can be used with either an BC-80X0 cradle or
Stargate™ radio base station to build a Cordless Reading System for the collection,
decoding and transmission of barcoded data.
PowerScan
™
M8300 laser readers automatically scan barcodes at a distance. Simply
aim and pull the trigger.
SCAN LINE POSITION
Code scanning is performed along the scan line emitted from the reading window.
This line must cross the entire code. The best reading angles are indicated in the
figure below:
READING ANGLE
Successful scanning is obtained by tilting the reader with respect to the barcode to
avoid direct reflections that impair the reading performance, see the figure below.
Using PowerScan™ M8300
Quick Reference Guide 3
AIMING SYSTEM
PowerScan
™
M8300 provides an aiming system. If enabled, a partial trigger press
produces a red spot, which should be aimed over the code center to get the best
reading performance, see figure (1) above. By completely pressing the trigger the
scan line appears to start the code scanning (2).
After setting up the reader
, you can enable or disable the aiming system by reading
the codes below:
Disable Aiming System (Default)
Ì$+Bj0$-"Î
Enable Aiming System
Ì$+Bj1$-'Î
Charging the Batteries
4PowerScan™ M8300
CHARGING THE BATTERIES
Once the BC-80X0/C-8000 is powered, you can charge the reader's batteries.
Place the PowerScan
™
M8300 into the BC-80X0 cradle or the C-8000 battery charger.
The "Reader" LED on the cradle/battery charger turns red.
The battery is completely charged when the "Reader" LED on the cradle/battery
charger turns green.
To change the batteries, unscrew the retaining screw and extract the battery pack
from the reader handle. Then, insert the new battery pack into the reader handle and
tighten the screw. (See the following figures).
Figure 1 – Changing the Batteries
Before using the Battery, read “Battery Safety” in the following section.
Datalogic recommends annual replacement of rechargeable battery packs
to ensure maximum performance.
1
2
Charging the Batteries
Quick Reference Guide 5
BATTERY SAFETY
To install, charge and/or perform any other action on the battery, follow the
instructions in this manual.
WARNING
Do not discharge the battery using any device except for the scanner.
When the battery is used in devices other than the designated product, it
may damage the battery or reduce its life expectancy. If the device causes
an abnormal current to flow, it may cause the battery to become hot,
explode or ignite and cause serious injury.
Lithium-ion battery packs may get hot, explode or ignite and cause seri-
ous injury if exposed to abusive conditions. Be sure to follow the safety
warnings listed on this and the following page.
• Do not place the battery pack in fire or heat.
• Do not connect the positive terminal and negative terminal of the bat-
tery pack to each other with any metal object (such as wire).
• Do not carry or store the battery pack together with metal objects.
• Do not pierce the battery pack with nails, strike it with a hammer, step
on it or otherwise subject it to strong impacts or shocks.
• Do not solder directly onto the battery pack.
• Do not expose the battery pack to liquids, or allow the battery to get
wet.
• Do not apply voltages to the battery pack contacts.
WARNING
In the event the battery pack leaks and the fluid gets into your eye, do not
rub the eye. Rinse well with water and immediately seek medical care. If
left untreated, the battery fluid could cause damage to the eye.
CAUTION
Always charge the battery at 32° – 104°F (0° - 40°C) temperature range.
Use only the authorized power supplies, battery pack, chargers, and
docks supplied by your Datalogic reseller. The use of any other power sup-
plies can damage the device and void your warranty.
Do not disassemble or modify the battery. The battery contains safety and
protection devices, which, if damaged, may cause the battery to generate
heat, explode or ignite.
CAUTION
Do not place the battery in or near fire, on stoves or other high tempera-
ture locations.
Do not place the battery in direct sunlight, or use or store the battery
inside cars in hot weather. Doing so may cause the battery to generate
heat, explode or ignite. Using the battery in this manner may also result in
a loss of performance and a shortened life expectancy.
Charging the Batteries
6PowerScan™ M8300
As with other battery types, Lithium-Ion (LI) batteries will lose capacity over time.
Capacity deterioration is noticeable after one year of service whether the battery is in
use or not. It is difficult to precisely predict the finite life of a LI battery, but cell
manufacturers rate them at 500 charge cycles. In other words, the batteries should be
expected to take 500 full discharge/charge cycles before needing replacement. This
number is higher if partial discharging/recharging is adhered to rather than full/deep
discharging,
The typical manufacturer advertised useful life of LI batteries is one-three years,
depending on usage and number of charges, etc., after which they should be
removed from service, especially in mission critical applications. Do not continue to
use a battery that is showing excessive loss of capacity, it should be properly recycled
/ disposed of and replaced. For most applications, batteries should be replaced after
one year of service to maintain customer satisfaction and minimize safety concerns.
Collect and recycle waste batteries separately from the device to comply with
European Directive 2006/66/EC, 2011/65/EU, 2002/96/EC and 2012/19/EU,
and
subsequent modifications, US and China regulatory and other laws and regulations
about the environment.
CAUTION
Do not place the battery in microwave ovens, high-pressure containers or
on induction cookware.
Immediately discontinue use of the battery if, while using, charging or
storing the battery, the battery emits an unusual smell, feels hot, changes
color or shape, or appears abnormal in any other way.
Do not replace the battery pack when the device is turned on.
Do not remove or damage the battery pack’s label.
Do not use the battery pack if it is damaged in any part.
Battery pack usage by children should be supervised.
Charging the Batteries
Quick Reference Guide 7
SETUP
PowerScan
™
M8300/BC-80X0 Point-to Point Configuration
1. Connect a BC-80X0 cradle to the Host. For installation and connection infor-
mation see the BC-80X0 Quick Reference Manual.
2. Charge the PowerScan
™
M8300 battery using an BC-80X0 or the
C-8000 charger as described in this Quick Reference manual. A full charge
takes 4 hours if using an external power supply; while it takes up to 10 hours
if supplying power through the USB port.
3. Configure the reader as described in this Quick Reference -
PowerScan
™
M8300/BC-80X0 Point-to-Point Setup.
4. Configure the BC-80X0 cradle. See BC-80X0 Configuration in the
BC-80X0 Quick Reference.
or
PowerScan
™
M8300/BC-80X0 Stand Alone Configuration
1. Connect a BC-80X0 cradle to the Host. For installation and connection infor-
mation see the BC-80X0 Quick Reference Manual.
2. Charge the PowerScan
™
M8300 battery using an BC-80X0 or the
C-8000 charger as described in this Quick Reference manual. A full charge
takes 4 hours if using an external power supply; while it takes up to 10 hours
if supplying power through the USB port.
3. Configure the reader as described in this Quick Reference -
PowerScan
™
M8300/BC-80X0 Stand Alone Setup.
4. Configure the BC-80X0 cradle. See BC-80X0 Configuration in the
BC-80X0 Quick Reference.
or
PowerScan
™
M8300/STAR-System™ Configuration
1. Charge the PowerScan
™
M8300 battery using a BC-8000 or the
C-8000 charger as described in this Quick Reference manual. A full charge
takes 4 hours if using an external power supply; while it takes up to 10 hours
if supplying power through the USB port.
2. Configure the reader as described in this Quick Reference
PowerScan
™
M8300/STAR-System™ Setup.
PowerScan™ M8300 Configuration
8PowerScan™ M8300
POWERSCAN
™
M8300 CONFIGURATION
POWERSCAN
™
M8300/BC-80X0 POINT-TO-POINT SETUP
A rapid configuration procedure has been devised for point-to-point applications
where a single
reader is associated exclusively with its own BC-80X0 base station and
where it is not necessary to set the Date and Time parameters.
A special pre-printed bind-address label provided in the BC-80X0 base station
package can be used to bind the PowerScan
™
M8300 reader to the base station with
the address coded on the label. The address is also written numerically on the label to
be easily recognized. Valid addresses are in the range from 0000 to 1999. Make sure
that all cradles used in the same area have different addresses.
To rapidly configure your point-to-point application:
END of procedure. YOUR READER IS NOW READY TO READ CODES.
1. Apply the bind-address label onto the BC-80X0 base station as indicated in
the BC-80X0 Quick Reference Manual.
2. When the BC-80X0 cradle is connected and powered, read the
Bind-Address label to pair the PowerScan
™
M8300 to the BC-80X0 cradle.
The green LED on the PowerScan
™
M8300 will blink: the reader is ready to be
positioned onto the cradle.
3. Firmly position the reader onto the cradle within 10 seconds, a beep will be
emitted, signaling that the BC-80X0 cradle has been paired to the
PowerScan
™
M8300, and the green LED on the reader will go off.
If it ever becomes necessary to
change the reader, just read the
bind-address label applied to the
cradle and position the new
reader onto the cradle.
Do not use multiple readers with
this configuration method.
4. Configure the BC-80X0 cradle, refer to the “BC-80X0 Quick Reference”.
Green LED
PowerScan™ M8300 Configuration
Quick Reference Guide 9
POWERSCAN
™
M8300/BC-80X0 STAND ALONE SETUP
When the BC-80X0 cradle is connected and powered, configure the PowerScan
™
M8300 by reading the following codes in the given sequence and follow the
instructions.
Note: for the numeric code selection of steps 3, 4, and 5 use the table at the end
of this Quick Reference.
1.
Restore PowerScan
™
M8300 Default
Ì$+$*oÎ
2. Enter Configuration
Ì$+;Î
3. Set Date
ÌIA%Î
+
six digits for Day, Month and Year (DDMMYY).
4. Set Time
ÌIB'Î
+
four digits for Hours and Minutes (HHMM).
5. Set Radio Address
ÌRA0RFHÎ
+
four digits for the PowerScan
™
M8300 Address
(from 0000 to 1999).
All readers used in the same area must have different addresses.
6. Exit and Save Configuration
Ì$-?Î
PowerScan™ M8300 Configuration
10 PowerScan™ M8300
END of procedure. YOUR READER IS NOW READY TO READ CODES.
7.
Read the Bind code to pair the PowerScan
™
M8300 to the BC-80X0 cradle.
The reader is dedicated to the cradle. Any previously bound reader will be
excluded.
To connect several readers to the same cradle see the following section "Using
Multiple Readers with Same Cradle".
Bind
Ì$+RN0$-IÎ
The green LED on the PowerScan
™
M8300 will blink: the reader is ready to be
positioned onto the cradle.
8. Firmly position the reader onto the cradle within 10 seconds, a beep will be
emitted, signaling that the BC-80X0 cradle has been paired to the PowerScan
™
M8300, and the green LED on the reader will go off.
9. Configure the BC-80X0 cradle, refer to the “BC-80X0 Quick Reference”.
Green LED
PowerScan™ M8300 Configuration
Quick Reference Guide 11
USING MULTIPLE READERS WITH SAME CRADLE
If you want to use several readers associated with the same cradle, you must first Bind
the cradle with one of the readers (see previously described configuration procedure).
Successive readers
can be associated with the same cradle by following the
configuration procedure substituting the Bind command with Join.
END of procedure.
POWERSCAN
™
M8300/STAR-MODEM™ STAND ALONE SETUP
To configure a PowerScan™ M8300 reader to communicate with STAR-Modem™ in
Stand Alone Mode, follow the "PowerScan™ M8300/BC-80X0 Stand Alone Setup"
procedure substituting steps 6 and 7 with those below:
END of procedure. YOUR READER IS NOW READY TO READ CODES.
7. Join
Ì$+RN1$-NÎ
The green LED on the PowerScan
™
M8300 will blink: the reader is ready to be
positioned onto the cradle. Complete step 8.
CAUTION
All readers associated with the same cradle must have different
addresses.
6. STAR-Modem™ Address
ÌRSRÎ
Read the code above and the four-digit address of the STAR-Modem™.
7. Exit and Save Configuration
Ì$-?Î
PowerScan™ M8300 Configuration
12 PowerScan™ M8300
POWERSCAN
™
M8300/STAR-SYSTEM™ SETUP
The following procedure allows configuring a PowerScan
™
M8300 reader to
communicate with various STAR-System™ devices such as Stargate™ RF base stations:
1.
Restore PowerScan
™
M8300 Default
Ì$+$*oÎ
2. Enter Configuration
Ì$+;Î
3. Set Date
ÌIA%Î
+
six digits for Day, Month and Year (DDMMYY).
4. Set Time
ÌIB'Î
+
four digits for Hours and Minutes (HHMM).
5. Set the connection according to the length of the codes to be read:
Code Length ≤240 Characters
ÌRA1aÎ
Code Length >240 Characters
(not for systems with BC-80X0 as Master)
ÌRA2dÎ
PowerScan™ M8300 Configuration
Quick Reference Guide 13
END of procedure. YOUR READER IS NOW READY TO READ CODES.
6. Set Radio Address
ÌRF8Î
+
four digits from the Numeric Table for the PowerScan
™
M8300 Address
(from 0000 to 1999).
All readers used in the same area must have different addresses.
7. Set First STAR-System™ Address
ÌRSRÎ
+
four digits from the Numeric Table in the range 0000 to 1999
8. Set Last STAR-System™ Address
ÌRTTÎ
+
four digits from the Numeric Table in the range 0000 to 1999
Whenever the system is composed of a single base station, the first
and last base station addresses (steps 7 and 8) must have the same
value.
9. Exit and Save Configuration
Ì$-?Î
PowerScan™ M8300 Default Configuration
14 PowerScan™ M8300
POWERSCAN
™
M8300 DEFAULT CONFIGURATION
DATA FORMAT
code identifier disabled, field adjustment disabled, code length not transmitted,
character replacement disabled
CODE SELECTION
enabled codes
• EAN 8/EAN 13 / UPC A/UPC E without ADD ON
check digit transmitted, no conversions
• Interleaved 2/5
check digit control and transmission, variable length code; 4-99 characters
• Standard Code 39
no check digit control, variable length code; 1-99 characters
• Code 128
variable length code; 1-99 characters
disabled codes
EAN 128, ISBT128, Code 93, Codabar, pharmaceutical codes, MSI, Code 11, Code 16K,
Code 49, GS1 DataBar™ (GS1 DataBar™ includes the following symbologies: GS1
DataBar Omnidirectional, GS1 DataBar Stacked, GS1 DataBar Expanded and GS1
DataBar Limited).
RADIO PARAMETERS
radio protocol timeout = 2 seconds, power-off timeout = 4 hours, transmission
mode = one-way, beeper control for radio response = normal, single store
disabled, batch mode disabled, find me enabled, radio RX timeout = disabled
Technical Features
Quick Reference Guide 15
TECHNICAL FEATURES
Electrical Features
Battery Type 2150 Li-Ion battery pack
Time of recharge max. 4 hours with external power supply
max. 10 hours with Host power
Operating autonomy
(continuous reading)
60,000 reads (typical)
Display
(Only available with some
models)
LCD 4 lines x 16 chars
Programmable font and backlight
Indicators Good Read LED green
Good Read Spot green
Beeper
Laser Features
M8300 M8300-AR
Power (max) in mW 0.9 mW 1.3 mW
Light Source VLD in the range between 630~680 nm
Scan Rate 35 ± 5 scans/sec
Reading Field Width
(typical) see reading tables
Max. Resolution 0.076 mm (3 mils) 0.19 mm (7.5 mils)
PCS minimum
(Datalogic Test Chart)
15% 25%
Scan Angle 42° 13.5° ± 0.7
Laser Safety Class 2 (EN 60825-1 / CDRH)
Radio Features European Models USA Models
Radio Frequency 433.92 MHz 910 MHz
Bit rate 19200 baud 36800 baud
Range (in open air) 50 m 30 m
System Configuration BC-80X0 STARGATE™
Max. number of devices
per base station
32 255
Max. number of devices
in the same reading area
2000
Environmental Features
Working Temperature -20° to +50 ° C / -4 to +122 °F
Storage Temperature -20° to +70 ° C / -4 to +158 °F
Humidity 90% non condensing
Drop resistance
(on concrete) 2 m
Protection Class IP65 (IP64 for models with display)
Mechanical Features
Weight (with batteries) about 400 g (14.10 oz)
Dimensions 212 x 109 x 71 mm (8.34 x 4.29 x 2.79 in)
Material Polycarbonate molded with rubber
Reading Tables
16 PowerScan™ M8300
READING TABLES
PowerScan™ M8300
PowerScan™ M8300 AR
mil Typical reading distance with good quality codes
5 2.1 - 13.3 cm / 0.8 - 5.2 in
7,5 3.5 - 24.2 cm / 1.4 - 9.5 in
10 2.9 - 42.8 cm / 1.1 - 16.8 in
13 2.3 - 55.1 cm / 0.9 - 21.7 in
20 6.3 - 78.5 cm / 2.5 - 30.9 in
40 2.5 - 97.8 cm / 1.0 - 38.5 in
mil Typical reading distance with good quality codes
7,5 18 - 50 cm / 7.0 - 19.7 in
10 18 - 85 cm / 7.0 - 33.5 in
15 15 - 165 cm / 5.9 - 65.0 in
20 12 - 210 cm / 4.7 - 82,7 in
40 18 - 375 cm / 7.0 - 147.6 in
55 25 - 485 cm / 9.8 in - 15.9 ft
100
(refl. Paper)
1.5 - 12.5 m / 4.9 - 41.0 ft
Datalogic ADC Limited Factory Warranty
Quick Reference Guide 17
DATALOGIC ADC LIMITED FACTORY WARRANTY
WARRANTY COVERAGE
Datalogic warranties this product against defects in workmanship and materials, for a
period of 3 years from the date of shipment, provided that the product is operated
under normal and proper conditions.
Datalogic ADC ("Datalogic") hardware products are warranted against defects in
material and workmanship under normal and proper use. The liability of Datalogic
under this warranty is limited to furnishing the labor and parts necessary to remedy
any defect covered by this warranty and restore the product to its normal operating
condition. Repair or replacement of product during the warranty does not extend the
original warranty term. Products are sold on the basis of specifications applicable at
the time of manufacture and Datalogic has no obligation to modify or update
products once sold.
If Datalogic determines that a product has defects in material or workmanship,
Datalogic shall, at its sole option repair or replace the product without additional
charge for parts and labor, or credit or refund the defective products duly returned to
Datalogic. To perform repairs, Datalogic may use new or reconditioned parts,
components, subassemblies or products that have been tested as meeting applicable
specifications for equivalent new material and products. Customer will allow
Datalogic to scrap all parts removed from the repaired product. The warranty period
shall extend from the date of shipment from Datalogic for the duration published by
Datalogic for the product at the time of purchase (Warranty period). Datalogic
warrants repaired hardware devices against defects in workmanship and materials on
the repaired assembly for a 90 day period starting from the date of shipment of the
repaired product from Datalogic or until the expiration of the original warranty
period, whichever is longer. Datalogic does not guarantee, and it is not responsible
for, the maintenance of, damage to, or loss of configurations, data, and applications
on the repaired units and at its sole discretion can return the units in the "factory
default" configuration or with any software or firmware update available at the time
of the repair (other than the firmware or software installed during the manufacture of
the product). Customer accepts responsibility to maintain a back up copy of its
software and data.
WARRANTY CLAIMS PROCESS
In order to obtain service under the Factory Warranty, Customer must notify Datalogic
of the claimed defect before the expiration of the applicable Warranty period and
obtain from Datalogic a return authorization number (RMA) for return of the product
to a designated Datalogic service center. If Datalogic determines Customer's claim is
valid, Datalogic will repair or replace product without additional charge for parts and
labor. Customer shall be responsible for packaging and shipping the product to the
designated Datalogic service center, with shipping charges prepaid. Datalogic shall
pay for the return of the product to Customer if the shipment is to a location within
the country in which the Datalogic service center is located. Customer shall be
responsible for paying all shipping charges, duties, taxes, and any other charges for
products returned to any other locations. Failure to follow the applicable RMA policy,
may result in a processing fee. Customer shall be responsible for return shipment
expenses for products which Datalogic, at its sole discretion, determines are not
defective or eligible for warranty repair.
Datalogic ADC Limited Factory Warranty
18 PowerScan™ M8300
WARRANTY EXCLUSIONS
The Datalogic Factory Warranty shall not apply to:
(i) any product which has been damaged, modified, altered, repaired or
upgraded by other than Datalogic service personnel or its authorized
representatives;
(ii) any claimed defect, failure or damage which Datalogic determines was
caused by faulty operations, improper use, abuse, misuse, wear and tear,
negligence, improper storage or use of parts or accessories not approved or
supplied by Datalogic;
(iii) any claimed defect or damage caused by the use of product with any other
instrument, equipment or apparatus;
(iv) any claimed defect or damage caused by the failure to provide proper
maintenance, including but not limited to cleaning the upper window in
accordance with product manual;
(v) any defect or damage caused by natural or man-made disaster such as but
not limited to fire, water damage, floods, other natural disasters, vandalism
or abusive events that would cause internal and external component
damage or destruction of the whole unit, consumable items;
(vi) any damage or malfunctioning caused by non-restoring action as for
example firmware or software upgrades, software or hardware
reconfigurations etc.;
(vii) the replacement of upper window/cartridge due to scratching, stains or
other degradation and/or
(viii)any consumable or equivalent (e.g., cables, power supply, batteries, keypads,
touch screen, triggers etc.).
NO ASSIGNMENT
Customer may not assign or otherwise transfer its rights or obligations under this
warranty except to a purchaser or transferee of product. No attempted assignment or
transfer in violation of this provision shall be valid or binding upon Datalogic
DATALOGIC'S LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, ORAL OR WRITTEN, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT
LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, OR NONINFRINGEMENT. DATALOGIC SHALL NOT BE LIABLE
FOR ANY DAMAGES SUSTAINED BY CUSTOMER ARISING FROM DELAYS IN THE
REPLACEMENT OR REPAIR OF PRODUCTS UNDER THE ABOVE. THE REMEDY SET
FORTH IN THIS WARRANTY STATEMENT IS THE CUSTOMER'S SOLE AND EXCLUSIVE
REMEDY FOR WARRANTY CLAIMS. UNDER NO CIRCUMSTANCES WILL DATALOGIC BE
LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY LOST PROFITS, OR ANY
INCIDENTAL, CONSEQUENTIAL IN-DIRECT, SPECIAL OR CONTINGENT DAMAGES
REGARDLESS OF WHETHER DATALOGIC HAD ADVANCE NOTICE OF THE POSSIBILITY
OF SUCH DAMAGES.
RISK OF LOSS
Customer shall bear risk of loss or damage for product in transit to Datalogic.
Datalogic shall assume risk of loss or damage for product in Datalogic's possession. In
the absence of specific written instructions for the return of product to Customer,
Datalogic will select the carrier, but Datalogic shall not thereby assume any liability in
connection with the return shipment.
Service and Support
Quick Reference Guide 19
SERVICE AND SUPPORT
Datalogic provides several services as well as technical support through its website.
Log on to www.datalogic.com and click on the links indicated for further information
including:
•PRODUCTS
Search through the links to arrive at your product page where you can down-
load specific Manuals and Software & Utilities including:
- Datalogic Aladdin™, a multi-platform utility program that allows device con-
figuration using a PC. It provides RS-232 interface configuration as well as con-
figuration barcode printing.
•SERVICE & SUPPORT
- Technical Support - Product documentation and programming guides and
Technical Support Department in the world
- Service Programs - Warranty Extensions and Maintenance Agreements
- Repair Services - Flat Rate Repairs and Return Material Authorization (RMA)
Repairs.
- Downloads – Manuals & Documentation, Data Sheets, Product Catalogues,
etc.
•CONTACT US
Information Request Form and Sales & Service Network
Compliance
20 PowerScan™ M8300
COMPLIANCE
This device must be opened by qualified personnel only.
The batteries must be removed before opening the device.
FCC COMPLIANCE
Modifications or changes to this equipment without the expressed written approval
of Datalogic could void the authority to use the equipment.
This device complies with PART 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference which may
cause undesired operation.
FCC ID U4F0015.
RADIO COMPLIANCE
Contact the competent authority responsible for the management of radio frequency
devices of your country to verify any possible restrictions or licenses required.
Refer to the web site http://ec.europa.eu/ for further information.
LASER SAFETY COMPLIANCE
The laser scanner conforms to the applicable requirements of both CDRH 21 CFR 1040
and EN60825-1 at the date of manufacture.
The laser light is visible to the human eye and is emitted from the output window (1).
Laser warning and classification label (2).
The laser scanner utilizes a low-power laser diode. Although staring directly at the
laser beam momentarily causes no known biological damage, avoid staring at the
beam as one would with any very strong light source, such as the sun. Avoid that the
CAUTION
La utilización de procedimientos o regulaciones diferentes de aquel-
las describidas en la documentación puede causar una exposición
peligrosa a la luz láser visible.
Compliance
Quick Reference Guide 21
laser beam hits the eye of an observer, even through reflective surfaces such as
mirrors, etc.
The following information is shown on the laser scanner device class label:
LED CLASS
Class 1 LED product.
This product conforms to EN60825-1:2001.
IC (INDUSTRY CANADA)
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
POWER SUPPLY
ITALIANO
Classe 2:
LUCE LASER
NON FISSARE IL RAGGIO
APPARECCHIO LASER DI
CLASSE 2
DEUTSCH
Klasse 2:
LASERSTRAHLUNG
NICHT IN DEN STRAHL
PRODUKT DER LASERKLASSE 2
FRANÇAIS
Classe 2:
RAYON LASER
EVITER DE REGARDER LE
RAYON
APPAREIL LASER DE
CLASSE 2
ESPAÑOL
Clase 2:
RAYO LÁSER
NO MIRAR FIJO EL RAYO
APARATO LÁSERDE CLASE 2
Atencíon
Características de la
fuente de alimentación
eléctrica.
Entrada:
100 - 240 VCA
min 400 mA 50-60 Hz
Salida:
12VDC, máx 1500mA
(-)Negativo al centro
Utilice en su red solo fuentes certificadas en Argentina.
El uso de fuentes de alimentación no compatibles puede resultar en riesgo de
incendio o de choque eléctrico para el usuario.
Compliance
22 PowerScan™ M8300
China RoHS Table of Restricted Elements (Scanner)
Compliance
Quick Reference Guide 23
China RoHS Table of Restricted Elements (Base)
ㇱઙฬ⒓
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
᦭Ქ᦭ኂ‛凝ᚗర⚛
PART
卋
ᳮ
叏
౐ચ卲 ᄙᄽ侶૖ ᄙᄽԲ૖ㅘ
Printed Circuit Board Assembly
⬉䏃ᵓ㒘ӊ
X O O O O O
Assy, Module
ܝᄺ㒘ӊ
X O O O O O
O
ઍ⴫ᱝẊㇱઙ⊛ᚲ᦭ဋ凝ޗறխࢬܶऱ具Ẋڶ੅ڶ୭ढ凝݁܅Պխ䦀Գا٥ࡉ㧺ॾஒ䣈䢓ຝᚲ咒ؒ⊛
ޝ䶣՗ॾஒ䣈঴խڶ੅ڶ୭ढ凝ऱૻၦ૞ޣρ(SJ/T 11363-2006) 億ࡳऱૻၦޕ
X:
ઍ⴫ᱝẊㇱઙᚲ↪⊛ဋ凝ޗறխ, ⥋ዋ᦭৻㮕᧚ᢱ౔ᚲ฽⊛᦭Ქ᦭ኂ‛凝೏Պխ䦀Գا٥ࡉ㧺ॾஒ䣈䢓ຝᚲ咒ؒ⊛
ޝ䶣՗ॾஒ䣈঴խڶ੅ڶ୭ढ凝ऱૻၦ૞ޣρ(SJ/T 11363-2006) 億ࡳऱૻ㊂
Compliance
24 PowerScan™ M8300
Cofetel Mexico Statement
BRAZILIAN CERTIFICATION STATEMENTS
PM8300
BC8x0-433
Cofetel Mexico Update
Este producto es usable en México.
Certificado Nr. RCPDAST08-0269 (COFETEL).
“Este equipamento opera em caráter secundário,
isto é, não tem direito a proteção contra
interferência prejudicial, mesmo de estações do
mesmo tipo, e não pode causar interferência a
sistemas operando em caráter primário.”
(
01
)
07898916345048
“Este equipamento opera em caráter secundário,
isto é, não tem direito a proteção contra
interferência prejudicial, mesmo de estações do
mesmo tipo, e não pode causar interferência a
sistemas operando em caráter primário.”
(
01
)
07898916345048
Compliance
Quick Reference Guide 25
WEEE COMPLIANCE
English
For information about the disposal of Waste Electrical and Electronic Equipment
(WEEE), please refer to the website at www.datalogic.com.
Italian
Per informazioni sullo smaltimento delle apparecchiature elettriche ed elettroniche
consultare il sito Web www.datalogic.com.
French
Pour toute information relative à l’élimination des déchets électroniques (WEEE),
veuillez consulter le site Internet www.datalogic.com.
German
Informationen zur Entsorgung von Elektro- und Elektronik- Altgeräten (WEEE)
erhalten Sie auf der Webseite www.datalogic.com.
Spanish
Si desea información acerca de los procedimientos para el desecho de los residuos del
equipo eléctrico y electrónico (WEEE), visite la página Web www.datalogic.com.
Portuguese
Para informações sobre a disposição de Sucatagem de Equipamentos Eléctricos e
Eletrônicos (WEEE - Waste Electrical and Electronic Equipment), consultar o site web
www.datalogic.com.
Chinese
有关处理废弃电气电子设备 (WEEE) 的信息， 请参考 Datalogic 公司的网站：
http://www.datalogic.com/。
Japanese
廃電気電子機器 (ＷＥＥＥ) の処理についての関連事項は Datalogic のサイト
www.datalogic.com, をご参照下さい。
Waste Electrical and Electronic Equipment (WEEE) Statement
Numeric Table
26 PowerScan™ M8300
NUMERIC TABLE
Ì01Î
0
Ì12Î
1
Ì23Î
2
Ì34Î
3
Ì45Î
4
Ì56Î
5
Ì67Î
6
Ì78Î
7
Ì89Î
8
Ì9:Î
9
DECLARATION OF CONFORMITY
La presente dichiarazione di conformità è rilasciata sotto la responsabilità esclusiva di Datalogic ADC Srl
per:
This Declaration of Conformity is issued under the sole responsibility of Datalogic ADC Srl for:
Cette déclaration de conformité est établie sous la seule responsabilité de Datalogic Srl pour:
Diese Konformitätserklärung wird unter der alleinigen Verantwortung des Datalogic ADC Srl erteilt für:
Esta declaración de conformidad se expide bajo la exclusiva responsabilidad de Datalogic ADC Srl para:
PowerScan M83xx ; Cordless Barcode Reader
PowerScan M85xx ; Cordless Barcode Reader
sono conformi alle Direttive del Consiglio Europeo sottoelencate:
are in conformity with the requirements of the European Council Directives listed below:
sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous:
den nachstehenden angeführten Direktiven des Europäischen Rats:
cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:
1999/5/EC - R&TTE Directive
2011/65/EU - RoHS Directive
Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:
This declaration is based upon compliance of the products to the following standards:
Cette déclaration repose sur la conformité des produits aux normes suivantes:
Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:
Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:
Datalogic ADC Srl, Via S. Vitalino, 13
Lippo di Calderara di Reno (BO) 40012 Italy
EC-054
Rev.: 4
Pag.: 1 di 1
e tutti i suoi modelli
and all its models
et tous ses modèles
und seine Modelle
y todos sus modelos
ETSI EN 301 489-3
V
1.4.1, A
UGUST
2002 :
E
LECTROMAGNETIC
COMPATIBILITY
AND
R
ADIO
SPECTRUM
M
ATTERS
(ERM); E
LECTROMAGNETIC
COMPATIBILITY
(EMC)
STANDARD
FOR
R
ADIO
E
QUIPMENT
AND
S
ERVICES
; P
ART
3: S
PECIFIC
C
ONDITIONS
FOR
S
HORT
-
RANGE
D
EVICES
(SRD)
OPERATING
ON
FREQUENCIES
BETWEEN
9
KHZ
AND
40
GHZ
EN 301 489-1 V1.8.1, A
PRIL
2008 :
EL
ECTROMAGNETIC
C
OMPATIBILITY
AND
R
ADIO
S
PECTRUM
M
ATTERS
(ERM); E
LECTROMAGNETIC
C
OMPATIBILITY
(EMC) S
TANDARD
FOR
R
ADIO
E
QUIPMENT
AND
S
ERVICES
; P
ART
1: C
OMMON
T
ECHNICAL
R
EQUIREMENTS
ETSI EN 300 220-2 V2.1.2, J
UNE
2007 :
E
LECTROMAGNETIC
COMPATIBILITY
AND
R
ADIO
SPECTRUM
M
ATTERS
(ERM); S
HORT
R
ANGE
D
EVICES
(SRD); R
ADIO
E
QUIPMENT
TO
BE
USED
IN
THE
25
MHZ
TO
1000
MHZ
F
REQUENCY
R
ANGE
WITH
P
OWER
L
EVELS
R
ANGING
UP
TO
500
M
W; P
ART
2: H
ARMONIZED
EN
COVERING
ESSENTIAL
REQUIREMENTS
UNDER
ARTICLE
3.2
OF
THE
R&TTE D
IRECTIVE
EN 60950-1, A
PRIL
2006 +
A11:2009+A1:2010 +
A12:2011:
IN
FORMATION
T
ECHNOLOGY
E
QUIPMENT
- S
AFETY
-
P
ART
1 : G
ENERAL
R
EQUIREMENTS
EN 50581, S
EPTEMBER
2012 :
T
ECHNICAL
D
OCUMENTATION
FOR
THE
A
SSESSMENT
OF
E
LECTRICAL
AND
E
LECTRONIC
P
RODUCTS
WITH
R
ESPECT
TO
THE
R
ESTRICTION
OF
H
AZARD
-
OUS
S
UBSTANCES
Lippo di Calderara, March 29th , 2013
R
UGGERO
C
ACIOPPO
Q
UALITY
& R
ELIABILITY
M
ANAGER
- E
UROPE
13
©2007-2014 Datalogic, Inc. • All rights reserved.
Datalogic and the Datalogic logo are registered trademarks
of Datalogic S.p.A. in many countries, including the U.S.A.
and the E.U.
Datalogic ADC, Inc.
959 Terry Street
|
Eugene
|
OR 97402
|
USA
Telephone: (1) 541-683-5700
|
Fax: (1) 541-345-7140
www.datalogic.com
820035914 (Rev K) January 2014
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Datalogic PowerScan M8300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Datalogic PowerScan M8300 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info