535536
15
Zoom out
Zoom in
Previous page
1/24
Next page
Quick Reference Guide 11
LED and Beeper Indications
The scanners beeper sounds and its lamps and indicator LEDs illuminate to indicate various functions or errors. The tables in this section list
some of these indications. Reference the PRG for a more complete listing. One exception to the behaviors listed in the tables is that some
functions are programmable, and may or may not be turned on. For example, certain indications such as the power-up beep can be disabled
using programming bar code labels.
INDICATION
Scanner
LED
BEEPER
COMMENT
Count Frequency Volume Duration
Pre-operating Mode OFF OFF
Power-up Beep N/A Unique WAV file sound. Default sound is a synthesized chord ending with two light bells.
Good Read Beep Bright flash 1 Current Current Current Frequency, volume and duration are configurable.
ROM Failure
200ms ON
200 ms OFF
1 Error Highest
200ms ON
200ms OFF
Indicates either Boot or Program ROM failure.
Scanner Active
Mode
On steady and
dim
N/A
The scanner is ready for operation. Scanning is immediately
available.
Scanner Disabled
Continuous
blink 100ms ON
/ 900ms OFF
N/A The Host has disabled scanning.
Sleep Mode
10ms ON
1990ms OFF
N/A
The scanner has been inactive for a period and is in a power-sav-
ing mode.
Chirp Indications
(see comment)
N/A 6 Highest Current
20ms ON
20ms OFF
A “Chirp” is used to indicate the following:
-Reading labels while in limited scanning mode.
-Label rejection during label programming.
-A label with no data.
-Labels rejected through the auxiliary port when in Scanner
Diagnostics Mode.
INDICATION Scale LED BEEPER COMMENT
Scale at Zero On steady N/A
The scale is at rest and reads zero weight. The scale is ready to
weigh.
Scale Error
Reporting
Coded
sequence
N/A
When the scanner is in Scale Diagnostics Mode, the Remote
Scale Display and the Scale LED indicator can communicate spe-
cific scale failures. See the PRG for more details.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Datalogic Magellan 9800i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Datalogic Magellan 9800i in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Datalogic Magellan 9800i

Datalogic Magellan 9800i User Manual - English - 452 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info