Manual Datalogic Gryphon I GM4400 2D (page 333 of 334) (English)

535628

333

Zoom out

Zoom in

1/334

Gryphon™ 2D Family

General Purpose Handheld

Area Imager Bar Code Reader

Gryphon I GD44XX/GBT4400/GM440X

Product Reference Guide



Datalogic Scanning, Inc.

959 Terry Street

Eugene, Oregon 97402

USA

Telephone: (541) 683-5700

Fax: (541) 345-7140

described ther

ein may be reproduced or transmitted in any form or by any means without prior written permission

of Datalogic Scanning, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic Scanning”). Owners of Datalogic

products are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for

the purchaser's own internal business purposes. Purchaser shall not remove or alter any proprietary notices, includ-

ing copyright notices, contained in this documentation and shall ensure that all notices appear on any reproduc-

tions of the documentation.

Should future revisions of this manual be published, you can acquir

e printed versions by contacting your Datalogic

representative. Electronic versions may either be downloadable from the Datalogic website (www.scanning.data-

logic.com) or provided on appropriate media. I

f you visit our website and would like to make comments or sugges-

tions about this or other Datalogic publications, please let us know via the "Contact Datalogic" page.

Disclaimer

Datalogic has taken reasonable measures to provide informa

tion in this manual that is complete and accurate, how-

ever, Datalogic reserves the right to change any specifica

tion at any time without prior notice.

Datalogic and the Datalogic logo are registered trademarks of Datal

ogic S.p.A. in many countries, including the

U.S.A and the E.U. All other brand and product names referred to herein may be trademarks of their respective own-

ers.

Microsoft Windows®, Windows® XP and the Windows logo are registered trademarks of Microsoft Corporation.

Patents

Gryphon I GD44XX

This product may be covered by one or more of the following patents:

Design Patents: CN ZL200830142386.5; CN ZL20

0930006852.1; EP870787; USD599799; USD606076

Utility Patents: EP996284; EP999514; EP1128315; EP1172

756; EP1396811; EP1413971; EP1828957; JP4435343;

US5481098; US6478224; US6512218; US6513714; US6561427; US6758403; US6808114; US6877664; US6997385;

US7053954; US7234641; US7387246; US7721966

Gryphon GM440X, GBT4400

This product may be covered by one or more of the following patents:

Design Patents: CN ZL200830142386.5; CN ZL200930006852.1; CN ZL201030175545.9; EP870787; EP1177943;

USD59

9799; USD606076; USD629003

Utility Patents: EP996284; EP999514; EP1128315; EP1172

756; EP1396811; EP1413971; EP1828957; JP4435343;

US5481098; US6478224; US6512218; US6513714; US6561427; US6758403; US6808114; US6877664; US6997385;

US7053954; US7234641; US7387246; US7721966.

BC40XX, UV Counterfeit Detection, CFS4000, CHR-GM40

This product may be covered by one or more of the following patents:

Design Patents: CN ZL201030175545.9; EP1177943; USD629003

Additional patents pending.

Product Reference Guide

Table of Contents

INTRODUCTION ................................................................................................................................................................................ 9

About this Manual .......................................................................................................................................................................................... 9

Overview .................................................................................................................................................................................................................................................... 9

Manual Conventions ...........................................................................................................................................................................................................................10

References ..................................................................................................................................................................................................... 10

Technical Support ........................................................................................................................................................................................ 10

Datalogic Website Support ...............................................................................................................................................................................................................10

Reseller Technical Support ................................................................................................................................................................................................................10

Telephone Technical Support ..........................................................................................................................................................................................................10

About the Reader ......................................................................................................................................................................................... 11

The BC40xx™ Radio Base ............................................................................................................................................................................. 12

Base LEDs .................................................................................................................................................................................................................................................12

Base Button .............................................................................................................................................................................................................................................12

BC40XX UV Counterfeit Detection .............................................................................................................................................................. 13

Battery Safety ............................................................................................................................................................................................... 14

Programming the Reader ............................................................................................................................................................................ 16

Configuration Methods ......................................................................................................................................................................................................................16

SETUP .............................................................................................................................................................................................. 17

Unpacking ..................................................................................................................................................................................................... 17

Setting Up the Reader ..................................................................................................................................................................................17

Installing the Interface Cable ......................................................................................................................................................................18

Configuring the Base Station ...................................................................................................................................................................... 20

Changing the Base Station Position ..............................................................................................................................................................................................21

Connecting the Base Station ............................................................................................................................................................................................................22

Connecting the Base when Security Pin is Enabled .................................................................................................................................................................25

Linking the Reader to a Base Station .............................................................................................................................................................................................25

Linking a BT Reader to a PC ..............................................................................................................................................................................................................26

Gryphon™ 2D System and Network Layouts ..............................................................................................................................................27

Stand Alone Layouts ...........................................................................................................................................................................................................................27

Interface Selection ....................................................................................................................................................................................... 29

Setting the Interface ............................................................................................................................................................................................................................29

Customizing Configuration Settings .......................................................................................................................................................... 33

Configure Interface Settings ............................................................................................................................................................................................................33

Global Interface Features ...................................................................................................................................................................................................................33

Configuring Other Features ..............................................................................................................................................................................................................33

Software Version Transmission .......................................................................................................................................................................................................33

Resetting the Product Configuration to Defaults .....................................................................................................................................................................34

Replacing the Battery ..........................................................................................................................................................................................................................35

CONFIGURATION USING BAR CODES............................................................................................................................................ 37

Configuration Parameters .................................................................................................................................................................................................................37

GLOBAL INTERFACE FEATURES .................................................................................................................................................. 39

Host Commands — Obey/Ignore .............................................................................................................................................................................39

USB Suspend Mode ........................................................................................................................................................................................................39

RS-232 Interface...................................................................................................................................................................... 41

Baud Rate ...........................................................................................................................................................................................................................42

Data Bits .............................................................................................................................................................................................................................43

Stop Bits ..............................................................................................................................................................................................................................43

Parity ....................................................................................................................................................................................................................................44

Handshaking Control ....................................................................................................................................................................................................45

RS-232/USB-Com Interfaces................................................................................................................................................... 46

Intercharacter Delay .......................................................................................................................................................................................................47

Beep On ASCII BEL ..........................................................................................................................................................................................................47

Beep On Not on File .......................................................................................................................................................................................................48

ACK NAK Options ............................................................................................................................................................................................................49

Contents

Gryphon™ I GD44XX

GBT4400/GM440X

ACK Character ..................................................................................................................................................................................................................50

NAK Character ..................................................................................................................................................................................................................50

ACK NAK Timeout Value ...............................................................................................................................................................................................51

ACK NAK Retry Count ....................................................................................................................................................................................................51

ACK NAK Error Handling ...............................................................................................................................................................................................52

Indicate Transmission Failure .....................................................................................................................................................................................52

Disable Character ............................................................................................................................................................................................................53

Enable Character .............................................................................................................................................................................................................53

Keyboard Settings .................................................................................................................................................................. 55

Country Mode ..................................................................................................................................................................................................................56

Send Control Characters ..............................................................................................................................................................................................60

Wedge Quiet Interval ....................................................................................................................................................................................................61

Intercode Delay ...............................................................................................................................................................................................................61

Caps Lock State ................................................................................................................................................................................................................62

Numlock .............................................................................................................................................................................................................................62

USB Keyboard Speed .....................................................................................................................................................................................................62

USB Keyboard Numeric Keypad ................................................................................................................................................................................64

USB-OEM Interface ................................................................................................................................................................. 65

USB-OEM Device Usage ................................................................................................................................................................................................66

Interface Options ............................................................................................................................................................................................................66

IBM 46XX Interface ................................................................................................................................................................. 67

46xx Number of Host Resets .......................................................................................................................................................................................68

Transmit Labels in Code 39 Format ..........................................................................................................................................................................70

Wand Emulation Interface ..................................................................................................................................................... 71

Wand Signal Speed ........................................................................................................................................................................................................72

Wand Polarity ...................................................................................................................................................................................................................72

Wand Idle State ................................................................................................................................................................................................................73

Transmit Noise .................................................................................................................................................................................................................73

Label Symbology Conversion .....................................................................................................................................................................................74

Data Format ............................................................................................................................................................................ 75

Global Prefix/Suffix ...................................................................................................................................................................................... 76

Global AIM ID ................................................................................................................................................................................................ 77

Set AIM ID Individually for GS1-128 ...............................................................................................................................................................................................79

Label ID .......................................................................................................................................................................................................... 80

Label ID: Pre-Loaded Sets ..................................................................................................................................................................................................................80

Individually Set Label ID .....................................................................................................................................................................................................................81

Label ID Control ...............................................................................................................................................................................................................81

Label ID Symbology Selection − 1D Symbologies ..............................................................................................................................................82

Advanced Formatting: User Label Edit ...................................................................................................................................................................87

Case Conversion ..............................................................................................................................................................................................................87

Character Conversion ....................................................................................................................................................................................................88

Reading Parameters ............................................................................................................................................................. 89

Double Read Timeout ...................................................................................................................................................................................................90

LED AND BEEPER INDICATORS ................................................................................................................................................... 92

Power On Alert .................................................................................................................................................................................................................92

Good Read: When to Indicate .....................................................................................................................................................................................92

Good Read Beep Type ...................................................................................................................................................................................................93

Good Read Beep Frequency .......................................................................................................................................................................................93

Good Read Beep Length ..............................................................................................................................................................................................94

Good Read Beep Volume .............................................................................................................................................................................................95

Good Read LED Duration .............................................................................................................................................................................................96

SCANNING FEATURES .................................................................................................................................................................97

Scan Mode .........................................................................................................................................................................................................................97

Stand Mode Indication ..................................................................................................................................................................................................98

Stand Operation ..............................................................................................................................................................................................................99

Pick Mode ....................................................................................................................................................................................................................... 100

Stand Mode Sensitivity .............................................................................................................................................................................................. 100

Stand Mode Illumination Off Time ........................................................................................................................................................................ 101

Scanning Active Time ................................................................................................................................................................................................. 101

Stand Illumination Control ....................................................................................................................................................................................... 102

Contents

Product Reference Guide

Motion Still Timeout ................................................................................................................................................................................................... 102

Flash On Time ................................................................................................................................................................................................................ 103

Flash Off Time ................................................................................................................................................................................................................ 103

Aiming Pointer .............................................................................................................................................................................................................. 104

Aiming Duration Timer .............................................................................................................................................................................................. 104

Green Spot Duration ................................................................................................................................................................................................... 105

Mobile Phone Mode ................................................................................................................................................................................................... 105

Partial Label Reading Control .................................................................................................................................................................................. 106

Decode Negative Image ............................................................................................................................................................................................ 106

Image Capture .............................................................................................................................................................................................................. 106

CORDED ONLY FEATURES .........................................................................................................................................................107

Corded Stand Mode .................................................................................................................................................................................................... 107

Corded Stand Beep ..................................................................................................................................................................................................... 108

MULTIPLE LABEL READING ......................................................................................................................................................108

Multiple Labels per Frame ........................................................................................................................................................................................ 108

Multiple Labels Ordering by Code Symbology ................................................................................................................................................. 109

Multiple Labels Ordering by Code Length ......................................................................................................................................................... 109

1D Symbologies.................................................................................................................................................................... 111

1D Code Selection ......................................................................................................................................................................................111

DISABLE ALL SYMBOLOGIES ....................................................................................................................................................112

CODE EAN/UPC ..........................................................................................................................................................................113

Coupon Control ............................................................................................................................................................................................................ 113

UPC-A ............................................................................................................................................................................................................................... 114

UPC-A Enable/Disable ................................................................................................................................................................................................ 114

UPC-A Check Character Transmission .................................................................................................................................................................. 114

Expand UPC-A to EAN-13 .......................................................................................................................................................................................... 115

UPC-A Number System Character Transmission .............................................................................................................................................. 115

UPC-A 2D Component ............................................................................................................................................................................................... 116

UPC-E ..........................................................................................................................................................................................116

UPC-E Enable/Disable ................................................................................................................................................................................................. 116

UPC-E Check Character Transmission ................................................................................................................................................................... 117

UPC-E 2D Component ................................................................................................................................................................................................ 117

Expand UPC-E to EAN-13 .......................................................................................................................................................................................... 118

Expand UPC-E to UPC-A ............................................................................................................................................................................................ 118

UPC-E Number System Character Transmission ............................................................................................................................................... 119

GTIN FORMATTING ....................................................................................................................................................................119

EAN 13 (JAN 13) .........................................................................................................................................................................120

EAN 13 Enable/Disable .............................................................................................................................................................................................. 120

EAN 13 Check Character Transmission ................................................................................................................................................................ 120

EAN-13 Flag 1 Character ............................................................................................................................................................................................ 121

EAN-13 ISBN Conversion ........................................................................................................................................................................................... 121

EAN-13 2D Component ............................................................................................................................................................................................. 122

ISSN ............................................................................................................................................................................................122

ISSN Enable/Disable .................................................................................................................................................................................................... 122

EAN 8 (JAN 8) .............................................................................................................................................................................123

EAN 8 Enable/Disable ................................................................................................................................................................................................. 123

EAN 8 Check Character Transmission ................................................................................................................................................................... 123

Expand EAN 8 to EAN 13 ........................................................................................................................................................................................... 124

EAN 8 2D Component ................................................................................................................................................................................................ 124

UPC/EAN GLOBAL SETTINGS ....................................................................................................................................................125

UPC/EAN Price Weight Check .................................................................................................................................................................................. 125

UPC/EAN Quiet Zones ................................................................................................................................................................................................ 126

ADD-ONS ....................................................................................................................................................................................127

Optional Add-ons ........................................................................................................................................................................................................ 127

Optional Add-On Timer ............................................................................................................................................................................................. 128

Optional GS1-128 Add-On Timer ........................................................................................................................................................................... 131

CODE 39 ......................................................................................................................................................................................134

Code 39 Enable/Disable ............................................................................................................................................................................................ 134

Code 39 Check Character Calculation .................................................................................................................................................................. 134

Code 39 Check Character Transmission .............................................................................................................................................................. 135

Code 39 Start/Stop Character Transmission ...................................................................................................................................................... 136

Code 39 Full ASCII ........................................................................................................................................................................................................ 136

Contents

Gryphon™ I GD44XX

GBT4400/GM440X

Code 39 Quiet Zones .................................................................................................................................................................................................. 137

Code 39 Length Control ............................................................................................................................................................................................ 137

Code 39 Set Length 1 ................................................................................................................................................................................................. 138

Code 39 Set Length 2 ................................................................................................................................................................................................. 139

TRIOPTIC CODE ..........................................................................................................................................................................140

Trioptic Code Enable/Disable .................................................................................................................................................................................. 140

CODE 32 (ITAL PHARMACEUTICAL CODE) ...............................................................................................................................140

Code 32 Enable/Disable ............................................................................................................................................................................................ 140

Code 32 Feature Setting Exceptions ..................................................................................................................................................................... 141

Code 32 Check Char Transmission ........................................................................................................................................................................ 141

Code 32 Start/Stop Character Transmission ...................................................................................................................................................... 141

CODE 39 CIP (FRENCH PHARMACEUTICAL) .............................................................................................................................142

Code 39 CIP Enable/Disable ..................................................................................................................................................................................... 142

CODE 39 DANISH PPT ................................................................................................................................................................142

Code 39 Danish PPT Enable/Disable ..................................................................................................................................................................... 142

CODE 39 LAPOSTE .....................................................................................................................................................................143

Code 39 LaPoste Enable/Disable ............................................................................................................................................................................ 143

CODE 39 PZN ..............................................................................................................................................................................143

Code 39 PZN Enable/Disable ................................................................................................................................................................................... 143

CODE 128 ...................................................................................................................................................................................144

Code 128 Enable/Disable .......................................................................................................................................................................................... 144

Expand Code 128 to Code 39 .................................................................................................................................................................................. 144

Code 128 Check Character Transmission ............................................................................................................................................................ 145

Code 128 Function Character Transmission ...................................................................................................................................................... 145

Code 128 Sub-Code Exchange Transmission .................................................................................................................................................... 146

Code 128 Quiet Zones ................................................................................................................................................................................................ 146

Code 128 Length Control .......................................................................................................................................................................................... 147

Code 128 Set Length 1 ............................................................................................................................................................................................... 148

Code 128 Set Length 2 ............................................................................................................................................................................................... 149

GS1-128 ......................................................................................................................................................................................150

GS1-128 Enable ............................................................................................................................................................................................................. 150

GS1-128 2D Component ........................................................................................................................................................................................... 150

CODE ISBT 128 ...........................................................................................................................................................................151

ISBT 128 Concatenation ............................................................................................................................................................................................ 151

ISBT 128 Force Concatenation ................................................................................................................................................................................ 151

ISBT 128 Concatenation Mode ................................................................................................................................................................................ 152

ISBT 128 Dynamic Concatenation Timeout ........................................................................................................................................................ 153

ISBT 128 Advanced Concatenation Options ...................................................................................................................................................... 153

INTERLEAVED 2 OF 5 (I 2 OF 5) .................................................................................................................................................154

I 2 of 5 Enable/Disable ................................................................................................................................................................................................ 154

I 2 of 5 Check Character Calculation ..................................................................................................................................................................... 155

I 2 of 5 Check Character Transmission .................................................................................................................................................................. 156

I 2 of 5 Length Control ............................................................................................................................................................................................... 156

I 2 of 5 Set Length 1 ..................................................................................................................................................................................................... 157

I 2 of 5 Set Length 2 ..................................................................................................................................................................................................... 158

INTERLEAVED 2 OF 5 CIP HR .....................................................................................................................................................159

Interleaved 2 of 5 CIP HR Enable/Disable ............................................................................................................................................................ 159

FOLLETT 2 OF 5 ..........................................................................................................................................................................159

Follett 2 of 5 Enable/Disable .................................................................................................................................................................................... 159

STANDARD 2 OF 5 .....................................................................................................................................................................160

Standard 2 of 5 Enable/Disable .............................................................................................................................................................................. 160

Standard 2 of 5 Check Character Calculation .................................................................................................................................................... 160

Standard 2 of 5 Check Character Transmission ................................................................................................................................................. 161

Standard 2 of 5 Length Control .............................................................................................................................................................................. 161

Standard 2 of 5 Set Length 1 ................................................................................................................................................................................... 162

Standard 2 of 5 Set Length 2 ................................................................................................................................................................................... 163

INDUSTRIAL 2 OF 5 ....................................................................................................................................................................164

Industrial 2 of 5 Enable/Disable .............................................................................................................................................................................. 164

Industrial 2 of 5 Check Character Calculation .................................................................................................................................................... 164

Industrial 2 of 5 Check Character Transmission ................................................................................................................................................ 165

Industrial 2 of 5 Length Control .............................................................................................................................................................................. 165

Industrial 2 of 5 Set Length 1 ................................................................................................................................................................................... 166

Contents

Product Reference Guide

Industrial 2 of 5 Set Length 2 ................................................................................................................................................................................... 167

CODE IATA ..................................................................................................................................................................................168

IATA Enable/Disable ................................................................................................................................................................................................... 168

IATA Check Character Transmission ..................................................................................................................................................................... 168

CODABAR ...................................................................................................................................................................................169

Codabar Enable/Disable ............................................................................................................................................................................................ 169

Codabar Check Character Calculation .................................................................................................................................................................. 169

Codabar Check Character Transmission .............................................................................................................................................................. 170

Codabar Start/Stop Character Transmission ...................................................................................................................................................... 170

Codabar Start/Stop Character Set .......................................................................................................................................................................... 171

Codabar Start/Stop Character Match ................................................................................................................................................................... 171

Codabar Quiet Zones .................................................................................................................................................................................................. 172

Codabar Length Control ............................................................................................................................................................................................ 172

Codabar Set Length 1 ................................................................................................................................................................................................. 173

Codabar Set Length 2 ................................................................................................................................................................................................. 174

ABC CODABAR ...........................................................................................................................................................................175

ABC Codabar Enable/Disable .................................................................................................................................................................................. 175

ABC Codabar Concatenation Mode ...................................................................................................................................................................... 175

ABC Codabar Dynamic Concatenation Timeout .............................................................................................................................................. 176

ABC Codabar Force Concatenation ....................................................................................................................................................................... 177

CODE 11 ......................................................................................................................................................................................178

Code 11 Enable/Disable ............................................................................................................................................................................................ 178

Code 11 Check Character Calculation .................................................................................................................................................................. 178

Code 11 Check Character Transmission .............................................................................................................................................................. 179

Code 11 Length Control ............................................................................................................................................................................................ 179

Code 11 Set Length 1 ................................................................................................................................................................................................. 180

Code 11 Set Length 2 ................................................................................................................................................................................................. 181

GS1 DATABAR™ OMNIDIRECTIONAL .......................................................................................................................................182

GS1 DataBar™ Omnidirectional Enable/Disable ............................................................................................................................................... 182

GS1 DataBar™ Omnidirectional GS1-128 Emulation ....................................................................................................................................... 182

GS1 DataBar™ Omnidirectional 2D Component .............................................................................................................................................. 183

GS1 DATABAR™ EXPANDED .....................................................................................................................................................183

GS1 DataBar™ Expanded Enable/Disable ............................................................................................................................................................ 183

GS1 DataBar™ Expanded GS1-128 Emulation ................................................................................................................................................... 184

GS1 DataBar™ Expanded 2D Component ........................................................................................................................................................... 184

GS1 DataBar™ Expanded Length Control ........................................................................................................................................................... 185

GS1 DataBar™ Expanded Set Length 1 ................................................................................................................................................................. 186

GS1 DataBar™ Expanded Set Length 2 ................................................................................................................................................................. 187

GS1 DATABAR™ LIMITED ..........................................................................................................................................................188

GS1 DataBar™ Limited Enable/Disable ................................................................................................................................................................. 188

GS1 DataBar™ Limited GS1-128 Emulation ........................................................................................................................................................ 188

GS1 DataBar™ Limited 2D Component ................................................................................................................................................................ 189

CODE 93 ......................................................................................................................................................................................189

Code 93 Enable/Disable ............................................................................................................................................................................................ 189

Code 93 Check Character Calculation .................................................................................................................................................................. 190

Code 93 Check Character Transmission .............................................................................................................................................................. 190

Code 93 Length Control ............................................................................................................................................................................................ 191

Code 93 Set Length 1 ................................................................................................................................................................................................. 192

Code 93 Set Length 2 ................................................................................................................................................................................................. 193

Code 93 Quiet Zones .................................................................................................................................................................................................. 194

MSI ..............................................................................................................................................................................................194

MSI Enable/Disable ...................................................................................................................................................................................................... 194

MSI Check Character Calculation ........................................................................................................................................................................... 195

MSI Check Character Transmission ........................................................................................................................................................................ 195

MSI Length Control ..................................................................................................................................................................................................... 196

MSI Set Length 1 .......................................................................................................................................................................................................... 197

MSI Set Length 2 .......................................................................................................................................................................................................... 198

PLESSEY ......................................................................................................................................................................................199

Plessey Enable/Disable .............................................................................................................................................................................................. 199

Plessey Check Character Calculation .................................................................................................................................................................... 199

Plessey Check Character Transmission ................................................................................................................................................................ 200

Plessey Length Control .............................................................................................................................................................................................. 200

Contents

Gryphon™ I GD44XX

GBT4400/GM440X

Plessey Set Length 1 ................................................................................................................................................................................................... 201

Plessey Set Length 2 ................................................................................................................................................................................................... 202

2D Symbologies.................................................................................................................................................................... 203

2D Global Features .....................................................................................................................................................................................203

2D Maximum Decoding Time ....................................................................................................................................................................................................... 204

2D Structured Append .................................................................................................................................................................................................................... 205

2D Normal/Inverse Symbol Control ............................................................................................................................................................................................ 205

Aztec Code ..................................................................................................................................................................................................206

Aztec Code Enable / Disable .......................................................................................................................................................................................................... 206

Aztec Code Length Control ........................................................................................................................................................................................................... 206

Aztec Code Set Length 1 ........................................................................................................................................................................................... 207

Aztec Code Set Length 2 ........................................................................................................................................................................................... 208

China Sensible Code ...................................................................................................................................................................................209

China Sensible Code Enable / Disable ....................................................................................................................................................................................... 209

China Sensible Code Length Control ......................................................................................................................................................................................... 209

China Sensible Code Set Length 1 ......................................................................................................................................................................... 210

China Sensible Code Set Length 2 ......................................................................................................................................................................... 211

Data Matrix .................................................................................................................................................................................................212

Data Matrix Enable / Disable ......................................................................................................................................................................................................... 212

Data Matrix Square/Rectangular Style ....................................................................................................................................................................................... 212

Data Matrix Length Control ........................................................................................................................................................................................................... 213

Data Matrix Set Length 1 ........................................................................................................................................................................................... 213

Data Matrix Set Length 2 ........................................................................................................................................................................................... 214

Maxicode .....................................................................................................................................................................................................215

Maxicode Enable / Disable ............................................................................................................................................................................................................. 215

Maxicode Primary Message Transmission ................................................................................................................................................................................ 215

Maxicode Length Control ............................................................................................................................................................................................................... 216

Maxicode Set Length 1 .............................................................................................................................................................................................. 216

Maxicode Set Length 2 .............................................................................................................................................................................................. 217

PDF417 ........................................................................................................................................................................................................218

PDF417 Enable / Disable ................................................................................................................................................................................................................. 218

PDF417 Length Control ................................................................................................................................................................................................................... 218

PDF417 Set Length 1 .................................................................................................................................................................................................. 219

PDF417 Set Length 2 .................................................................................................................................................................................................. 220

Micro PDF417 ..............................................................................................................................................................................................221

Micro PDF417 Enable / Disable .................................................................................................................................................................................................... 221

Micro PDF417 Code 128 GS1-128 Emulation .......................................................................................................................................................................... 221

Micro PDF417 Length Control ...................................................................................................................................................................................................... 222

Micro PDF417 Set Length 1 ...................................................................................................................................................................................... 222

Micro PDF417 Set Length 2 ...................................................................................................................................................................................... 223

QR Code .......................................................................................................................................................................................................224

QR Code Enable / Disable ............................................................................................................................................................................................................... 224

QR Code Length Control ................................................................................................................................................................................................................. 224

QR Code Set Length 1 ................................................................................................................................................................................................ 225

QR Code Set Length 2 ................................................................................................................................................................................................ 226

Micro QR Code ............................................................................................................................................................................................227

Micro QR Code Enable/Disable .................................................................................................................................................................................................... 227

Micro QR Code Length Control .................................................................................................................................................................................................... 227

Micro QR Code Set Length 1 .................................................................................................................................................................................... 228

Micro QR Code Set Length 2 .................................................................................................................................................................................... 229

UCC Composite ...........................................................................................................................................................................................230

UCC Composite Enable / Disable ................................................................................................................................................................................................. 230

UCC Optional Composite Timer ................................................................................................................................................................................................... 231

Postal Code Selection .................................................................................................................................................................................232

Postnet BB Control ............................................................................................................................................................................................................................ 233

WIRELESS FEATURES ............................................................................................................................................................ 235

WIRELESS BEEPER FEATURES ...................................................................................................................................................236

Good Transmission Beep .......................................................................................................................................................................................... 236

Beep Frequency ............................................................................................................................................................................................................ 236

Beep Duration ............................................................................................................................................................................................................... 237

Beep Volume ................................................................................................................................................................................................................. 238

Disconnect Beep .......................................................................................................................................................................................................... 238

Contents

Product Reference Guide

Docking Beep ................................................................................................................................................................................................................ 239

Leash Alarm .................................................................................................................................................................................................................... 239

CONFIGURATION UPDATES ......................................................................................................................................................241

Automatic Configuration Update .......................................................................................................................................................................... 241

Copy Configuration to Scanner .............................................................................................................................................................................. 241

Copy Configuration to Base Station ...................................................................................................................................................................... 241

BATCH FEATURES ......................................................................................................................................................................242

Batch Mode .................................................................................................................................................................................................................... 242

Send Batch ...................................................................................................................................................................................................................... 242

Erase Batch Memory ................................................................................................................................................................................................... 243

RF Batch Mode Transmit Delay ............................................................................................................................................................................... 243

DIRECT RADIO AUTOLINK .........................................................................................................................................................244

Bluetooth-Only Features...................................................................................................................................................... 245

RF ADDRESS STAMPING ............................................................................................................................................................245

Source Radio Address Transmission ..................................................................................................................................................................... 245

Source Radio Address Delimiter Character ........................................................................................................................................................ 246

Link Timeout .................................................................................................................................................................................................................. 246

BT SECURITY FEATURES ............................................................................................................................................................247

BT Security Mode ......................................................................................................................................................................................................... 247

BT PIN Code .................................................................................................................................................................................................................... 248

Select PIN Code Length ............................................................................................................................................................................................. 248

Set PIN Code .................................................................................................................................................................................................................. 248

OTHER BT FEATURES .................................................................................................................................................................249

BT Poll Rate ..................................................................................................................................................................................................................... 249

Power Off ........................................................................................................................................................................................................................ 250

Powerdown Timeout .................................................................................................................................................................................................. 250

FEATURES FOR STAR MODELS ONLY .................................................................................................................................. 251

STAR Radio Protocol Timeout ................................................................................................................................................................................. 251

STAR Radio Transmit Mode ...................................................................................................................................................................................... 252

Motion Features................................................................................................................................................................... 253

Motion Aiming Control .............................................................................................................................................................................................. 253

Motion Sensitivity ........................................................................................................................................................................................................ 254

Motionless Timeout .................................................................................................................................................................................................... 254

REFERENCES................................................................................................................................................................................. 255

RS-232 Parameters .....................................................................................................................................................................................256

RS-232 .................................................................................................................................................................................................................................................... 256

RS-232/USB COM Parameters ....................................................................................................................................................................................................... 257

Keyboard Interface .....................................................................................................................................................................................264

Symbologies ...............................................................................................................................................................................................267

Set Length ............................................................................................................................................................................................................................................ 267

Data Editing ................................................................................................................................................................................................268

Reading Parameters ...................................................................................................................................................................................277

Scanning Features ......................................................................................................................................................................................278

Stand Mode Off Time ....................................................................................................................................................................................................................... 279

Aiming Duration Time ..................................................................................................................................................................................................................... 281

Multiple Labels Ordering by Code Symbology ...................................................................................................................................................................... 284

RF Features .................................................................................................................................................................................................286

RF Address Stamping ....................................................................................................................................................................................................................... 286

Contents

Gryphon™ I GD44XX

GBT4400/GM440X

BT-Only Features ............................................................................................................................................................................................................................... 288

Motion Features .........................................................................................................................................................................................289

MESSAGE FORMATTING.............................................................................................................................................................. 291

Message Formatting ..................................................................................................................................................................................291

LED and Beeper Control .................................................................................................................................................................................................................. 292

TECHNICAL SPECIFICATIONS...................................................................................................................................................... 293

Imager Labeling ..........................................................................................................................................................................................297

Standard Cable Pinouts .............................................................................................................................................................................298

LED and Beeper Indications .......................................................................................................................................................................300

Error Codes ..................................................................................................................................................................................................301

Base Station Indications (Cordless Models ONLY) ...................................................................................................................................302

STANDARD DEFAULTS................................................................................................................................................................ 303

SAMPLE BAR CODES.................................................................................................................................................................... 315

KEYPAD ........................................................................................................................................................................................ 319

SCANCODE TABLES ..................................................................................................................................................................... 321

Control Character Emulation .....................................................................................................................................................................321

Single Press and Release Keys ....................................................................................................................................................................................................... 321

Interface Type PC AT PS/2, USB-Keyboard or USB-Keyboard for APPLE ...............................................................................................322

Interface type PC AT PS/2 Alt Mode or USB-Keyboard Alt Mode ...........................................................................................................324

Digital Interface ..........................................................................................................................................................................................326

IBM31xx 102-key ........................................................................................................................................................................................327

IBM XT ..........................................................................................................................................................................................................328

Microsoft Windows Codepage 1252 .........................................................................................................................................................329

Product Reference Guide

Chapter 1

Introduction

About this Manual

This Product Reference Guide (PRG) is provided for users seeking advanced technical

information, including connection, programming, maintenance and specifications. The Quick

Reference Guide (QRG) and other publications associated with this product are downloadable

free of charge from the website listed on the back cover of this manual.

Overview

Chapter 1, (this chapter) presents information about manual conventions, and an overview of

the reader, its features and operation.

Chapter 2, Setup presents information about unpacking, cable connection information and

setting up the reader.

Chapter 3, Configuration Using Bar Codes provides instructions and bar code labels for customizing

your reader. There are different sections for interface ty

pes, general features, data formatting,

symbology-specific and model-specific features.

Chapter 4, References provides background information and detailed instructions for more

complex programming items.

Chapter 5, Message Formatting gives details for programming options.

Appendix A, Technical Specifications lists physical and performance characteristics, as well

environmental and regulatory specifications. It also provides standard cable pinouts and LED/

Beeper fu

nctions.

Appendix B, Standard Defaults references common factory default settings for reader features and

options.

Appendix C, Sample Bar Codes offers sample bar codes for several common symbologies.

Appendix D, Keypad includes numeric bar codes to be scanned for certain parameter settings.

Appendix E, Scancode Tables lists control character emulation information for Wedge and USB

Keyboard interfaces.

Introduction References

Gryphon™ I GD44XX

GBT4400/GM440X

Manual Conventions

The following conventions are used in this document:

The symbols listed below are used in this manual to no

tify the reader of key issues or procedures

that must be observed when using the reader:

Notes contain information necessary for properly diagnosing, repairing

and operating the reader.

CAUTION

The CAUTION symbol advises you of actions that could damage equip-

ment or property.

References

Current versions of this Product Reference Guide (PRG), Quick Reference Guide (QRG), the

Datalogic Aladdin™ Configuration application, and any other manuals, instruction sheets and

utilities for this product can be downloaded from the website listed below. Alternatively, printed

copies or product support CDs for most products can be purchased through your Datalogic

reseller.

Technical Support

Datalogic Website Support

The Datalogic website (www.datalogic.com) is the complete source for technical support and

information for Datalogic products. The site offers product support, warranty information,

product manuals, product tech

notes, software updates, demos, and instructions for returning

products for repair.

Reseller Technical Support

An excellent source for technical assistance and information is an authorized Datalogic reseller.

A reseller is acquainted with specific types of businesses, application software, and computer

systems and can provide individualized assistance.

Telephone Technical Support

If you do not have internet or email access, you may contact Datalogic technical support at

(541) 349-8283 or check the back cover of your manual for more contact information.

CAUTION

Always charge the battery at 32° – 104°F (0° - 40°C) temperature range.

Use only the authorized power supplies, battery pack

, chargers, and docks supplied by your Data-

logic reseller. The use of any other power supplies can damage the device and void your warranty.

Do not disassemble or modify the battery. The batter

contains safety and protection devices,

which, if damaged, may cause the battery to generate heat, explode or ignite.

Do not place the battery in or near fire, on stoves or other high temperature locations.

Do not place the battery in direct sunlight, or use or st

e the battery inside cars in hot weather.

Doing so may cause the battery to generate heat, explode or ignite. Using the battery in this man-

ner may also result in a loss of performance and a shortened life expectancy.

Do not place the battery in microwave ovens, high-pr

ssure containers or on induction cookware.

Immediately discontinue use of the battery if, while using

, charging or storing the battery, the bat-

tery emits an unusual smell, feels hot, changes color or shape,

or appears abnormal in any other

way.

Do not replace the battery pack when the device is turned on.

Do not remove or damage the battery pack’s label.

Do not use the battery pack if it is damaged in any part.

Battery pack usage by children

should be supervised.

Battery Safety Introduction

Product Reference Guide

As with other types of batteries, Lithium-Ion (LI) batteries will lose capacity over time. Capacity

deterioration is noticeable after one year of service whether the battery is in use or not. It is

difficult to precisely predict the finite life of a LI battery, but cell manufacturers rate them at

500 charge cycles. In other words, the batteries should be expected to take 500 full discharge /

charge cycles before needing replacement. This number is higher if partial discharging /

recharging is adhered to rather than full / deep discharging.

Storage of batteries for long time at fully charged status or at fully discharged status should be

avoided.

Only in case of long storage, to avoid deep discharge of the battery it is recommended to partially

recharge the battery every three months to keep the charge status at a medium level.

As a reference, run a fast recharge for 20 minutes ev

y three months on unused products to avoid

any performance deterioration of the cell.

The useful life of LI batteries depends on usage and number of charges, etc., after which they

should be removed from service, especially in mission critical applications. Do not continue to

use a battery showing excessive loss of capacity, it should be properly recycled / disposed of and

replaced.

Collect and recycle waste batteries separately from

the device in compliance with European

Directive 2006/66/EC, 2002/95/EC, 2002/96/EC and subsequent modifications, US and

China regulatory and others laws and regulations about the environment.

Introduction Programming the Reader

Gryphon™ I GD44XX

GBT4400/GM440X

Programming the Reader

Configuration Methods

Programming Bar Codes

The reader is factory-configured with a standard set of default features. After scanning the

interface bar code, you can select other options and customize your reader through use of the

instructions and programming bar code labels available in the corresponding features section for

your interface. Customizable settings for many features are found in "Configuration Parameters"

starting on page 37.

Some programming labels, like "Restore Custom Defaults" on page 34, require only the scan of the

single label to enact the change. Most, however, require

the reader to be placed in Programming

Mode prior to scanning them. Scan an ENTER/EXIT bar code once to enter Programming

Mode. Once the reader is in Programming Mode, scan a number of parameter settings before

scanning the ENTER/EXIT bar code a second time, which will then accept your changes, exit

Programming Mode and return the reader to normal operation.

There are some exceptions to the typical programming sequence described

above. Please read the description and setting instructions carefully when

configuring each programmable feature.

Datalogic Aladdin™

Datalogic Aladdin™ is a multi-platform utility program providing a quick and user-friendly

configuration method via the RS-232/USB-COM interface. Aladdin is available on the CD-

ROM provided with your product, and also from the Datalogic website. Aladdin allows you to

program the reader by selecting configuration commands through a user-friendly graphical

interface running on a PC. These commands are sent to the reader over the selected

communication interface, or they can be printed as bar codes to be scanned.

Aladdin also provides the ability to perform a soft

ware upgrade for the connected device (see the

Datalogic Aladdin™ Help On-Line for more details).

Product Reference Guide

Chapter 2

Setup

Unpacking

Check carefully to ensure the reader and any accessories ordered are present and undamaged. If

any damage occurred during shipment, contact Datalogic Technical Support. Information is

shown on

page 10

KEEP THE PACKAGING. Should the unit ever require s

ervice, it should be returned in its

original shipping container.

Setting Up the Reader

Depending on whether you are using a Corded or BT version of the Gryphon, follow the steps

provided in this section to connect and get your reader up and communicating with its host.

1. Begin by

Installing the Interface Cable (Corded) or Connecting the Base Station (BT)

2. Go to

Interface Selection

and set the desired interface.

Configure Interface Settings

(only if not using factory settings for that interface)

4. Go to

Configuring Other Features

(if modifications are needed from factory settings)

Configuring the Base Station Setup

Product Reference Guide

Changing the Base Station Position

The base station is configured by installing one of two sets of mechanical parts that come with

the cordless kit. The default mounts (shown below) provide three options: vertical (wall)

mounting, standing (45°), or horizontal mounting with a higher mechanical retention of the

scanner. Use the other mounts only for horizontal mounting, with lower retention of the

scanner. The different parts may be interchanged to customize retention preferences.

A tool such as a rigid pen or a flat screwdriver can be used to change the

mounts. Do not allow it to touch the contacts.

1. Insert the appropriate parts for the desired base station position, as shown below.

Standing,

Horizontal

or Vertical

Horizontal

ONLY

CAUTION

To ensure best contact and performance, do not intermix the parts of the two

different mount sets.

2. Using your thumbs, push open the plastic tabs on the bottom of the base to free the wing

holders.

Tab

Setup Configuring the Base Station

Gryphon™ I GD44XX

GBT4400/GM440X

3. The stand can now be repositioned in either horizontal or standing position.

Horizontal

Standing

Connecting the Base Station

Figure 7

shows how to connect the Base Station to a terminal, PC or other host device. Turn off

the host before connection and consult the manual for that equipm

ent (if necessary) before

proceeding. Connect the interface cable before applying power to the Base Station.

The Gryphon GBT4400 can be set up to require a PIN code when connecting to the

host. If you are connecting to a system that uses a custom security PIN, follow the

procedure in

"Connecting the Base when Security Pin is Enabled" on page

. For

information on how to configure this feature, see

"BT Security Mode" starting on page

247

Base Station Connection and Routing:

Fully insert the Power Cable and Interface (I/F) Cable

connectors into their respective ports in the underside of the Base Station (see

Figure 7

). Then

connect to an AC Adapter, and plug the AC power cord into the (wall) outlet.

Gryphon Wireless can also be Powered by the Terminal. When powered by the Ter-

minal, the battery charger is automatically set as Slow charge.

For some specific interfaces or hosts or lengths of cable

the use of an external

power supply may be recommended for full recharging capability (see

"Technical

Specifications" on page 293

for more details).

Configuring the Base Station Setup

Product Reference Guide

Figure 7. Connecting the Base Station

Base

Station

I/F Cable

AC/DC

Adapter

DC Power

Cord

Wall plug

Connector

Securing the DC Power Cord (Optional)

The DC power cord for the adapter can be secured to the bottom of the base in order to

maximize the mechanical retention of the cable itself. The routing of the power cord can be

changed to accommodate the base station positioning: horizontal, stand or wall mounting. The

cables can be looped around to the front of the Base Station, or fed directly out the back of the

Base Station, as shown in

Figure 8 on page 23

Figure 8. Options for routing the DC cord

Please refer to the arrows depicted on the bottom of the base when placing the cables, detailed in

Figure 9

Setup Configuring the Base Station

Gryphon™ I GD44XX

GBT4400/GM440X

Figure 9. Arrows showing routing

Host Connection:

Verify before connection that the reader’s cable type is compatible with your

host equipment.

Most connections plug directly into the host device as shown in

Figure 10

. Keyboard Wedge

interface cables have a ‘Y’ connection where its female end mates with the male end of the cable

from the keyboard and the remaining end

at the keyboard port on the terminal/PC.

Figure 10. Connecting to the Host

or...

Power Connection :

Plug the AC Adapter in to an approved AC wall socket with the cable

facing downwards (as shown in

Figure 7

) to prevent undue strain on the socket.

Disconnecting the Cable:

To detach the cable, insert a paper clip or similar object into the hole

on the base, as shown in

Figure 11

Figure 11. Disconnecting the Cable

Insert

Paper Clip

Configuring the Base Station Setup

Product Reference Guide

Connecting the Base when Security Pin is Enabled

When connecting the Base to a system that has a custom Security Pin enabled, follow the steps

below in the order shown:

1. Power down the host system.

2. Connect the appropriate interface

cab

le into the Base as shown in

Figure 10

3. Place the reader in the Base.

4. Power up the host. The reader will link to the Base

5. When the host completely powers up, a new custom Security Pin Code may be sent to the

ader and Base, depending on host configuration. Contact Datalogic Technical Support

for more information.

If you want to change security settings or set up a PIN, see

"BT Security

Mode" starting on page 247

Linking the Reader to a Base Station

RF Devices

For RF devices, before configuring the interface it is necessary to link the handheld with the

base. To link the handheld and the base, press the trigger to wake it and place it on the base. If

the reader was previously linked to another base, you must first scan the Unlink action

command before re-linking to the new base.

Unlnk

BT Models only

Remember: The mandatory condition for establishing a new linking between a BT handheld

and a BT base is that the handheld is unlinked and they share the same security configuration. A

successful link is indicated by three ascending tones from the reader. A high-low-high-low tone

indicates the link attempt was unsuccessful. A single green LED flash after this tone indicates no

Base Station was discovered. Two green LED flashes after this tone indicates that more than one

Base Station was discovered and the reader did not link. Three LED flashes after this tone

indicate a security error.

Setup Configuring the Base Station

Gryphon™ I GD44XX

GBT4400/GM440X

Linking a BT Reader to a PC

The reader can optionally be linked to a Bluetooth-enabled PC with the serial port profile, in

either server mode or client mode.

Linking to a PC in Server Mode (BT Slave Mode)

To link a BT reader in server mode to a Bluetooth-enabled PC, follow these steps:

1. Install any drivers provided with the Bluetooth adapter.

2. Scan the bar code bel

ow to make the scanner visible to the host computer.

³LnkSv

Link to a PC in Server Mode

3. Use the host computer’s Bluetooth manager to “Discover new devices” and select "Data-

logic Scanner." If you receive an error message, it may be necessary

to disable security on

the device.

4. Select “connect” on the PC to link the reader to the PC. Use an RS-232 terminal program

to see incoming

data on the port designated by the computer's Bluetooth manager.

Linking to a PC in Client Mode (BT Master Mode)

The reader can optionally be linked in client mode to a Bluetooth-enabled PC with the serial

port profile. To do this, follow these steps:

1. Ensure the PC or terminal can network with B

uetooth devices and that it is powered on.

2. Ensure that a COM port is assigned under Services within the Bluetooth setup menu.

3. Create a Link label that contains the addr

ess of

the PC Bluetooth adapter.

NOTE

The Bluetooth address can be found under "Properties" within in the

Bluetooth setup menu.



The link label is a Code 128 function 3 label with the following format:

<FN3 char>Ln

kB<12 character Bluetooth address>

4. Scan the link label you created in step 3.

Power Off

Shuts off power to the BT handheld until next trigger pull. This function only applies to the BT

model.

Gryphon™ 2D System and Network Layouts Setup

Product Reference Guide

Gryphon™ 2D System and Network Layouts

Stand Alone Layouts

Figure 12. Single Reader Layout

Figure 13. Multiple Reader Layout

Wireless models only

(not valid for BT model)

In stand alone systems, each base station is connected to a single Host.

Setup Interface Selection

Gryphon™ I GD44XX

GBT4400/GM440X

Table 1. Available Interfaces

RS-232 FEATURES

RS-232 standard interface

Select RS232-STD

Set RS-232

Interface

Features

starting on

page 41

$P,HA12,P(CR)

Select RS232-WN

RS-232 Wincor-Nixdorf

RS-232 for use with OPOS/UPOS/JavaPOS

$P,HA13,P(CR)

Select RS-232 OPOS

$P,HA47,P(CR)

Select USB-COM-STD

a. Download the correct USB Com driver from www.datalogic.com

USB Com to simulate RS-232 standard interface

IBM

FEATURES

$P,HA08,P(CR)

Select IBM-P5B

IBM-46xx Port 5B reader interface

Set IBM

Interface

Features

starting on

page 67

IBM-46xx Port 9B reader interface

$P,HA23,P(CR)

Select IBM-P9B

USB-OEM FEATURES

$P,HA45,P(CR)

Select USB-OEM

USB-OEM

(can be used for OPOS/UPOS/JavaPOS)

Set USB-OEM

Interface

Features

starting on

page 65

KEYBOARD FEATURES

$P,HA2B,P(CR)

Select USB Alternate Keyboard

USB Keyboard with alternate key encoding

AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70,

80, 90 & 95 w/Standard Key Encoding

$P,HA29,P(CR)

Select KBD-AT

Set KEYBOARD

WEDGE

Interface

Features

starting on page

$P,HA11,P(CR)

Select KBD-AT-NK

Keyboard Wedge for IBM AT PS2 with

standard key encoding but without

external keyboard

AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70,

80, 90

& 95 w/Alternate Key

$P,HA26,P(CR)

Select KBD-AT-ALT

$P,HA10,P(CR)

Select KBD-AT-ALT-NK

Keyboard Wedge for IBM AT PS2 with

alternate key encoding but without

external keyboard

PC/XT w/Standard Key Encoding

$P,HA28,P(CR)

Select KBD-XT

$P,HA14,P(CR)

Select KBD-IBM-3153

Keyboard Wedge for IBM Terminal 3153

Interface Selection Setup

Product Reference Guide

KEYBOARD — cont. FEATURES

Keyboard Wedge for IBM Terminals

31xx, 32xx, 34xx, 37xx make

only key-

board

$P,HA15,P(CR)

Select KBD-IBM-M

Set KEYBOARD

WEDGE

Interface

Features

starting on page 55

$P,HA16,P(CR)

Select KBD-IBM-MB

Keyboard Wedge for IBM Terminals

31xx, 32xx, 34xx, 37xx make break key-

board

Keyboard Wedge for DIGITAL Termi-

nals VT2xx, VT3xx, VT4xx

$P,HA1B,P(CR)

Select KBD-DIG-VT

$P,HA35,P(CR)

Select USB Keyboard

USB Keyboard with standard key encoding

USB Keyboard for Apple computers

$P,HA2C,P(CR)

Select USB-KBD-APPLE

WAND EMULATION FEATURES

Wand Emulation

( B T o n ly )

$P,HA24,P(CR)

Select WAND

Set WAND

Interface

Features

starting on page 71

Setup Interface Selection

Gryphon™ I GD44XX

GBT4400/GM440X

Customizing Configuration Settings Setup

Product Reference Guide

Customizing Configuration Settings

Configure Interface Settings

If after scanning the interface bar code from the previous table, your installation requires you to

select options to further customize your reader, turn to the appropriate section for your interface

type in

"Configuration Parameters" starting on page 37

•

"RS-232 Interface" on page 41

•

"RS-232/USB-Com Interfaces" on page 46

•

"Keyboard Settings" on page 55

•

"RS-232/USB-Com Interfaces" on page 46

•

"IBM 46XX Interface" on page 67

•

"Wand Emulation Interface" on page 71

Global Interface Features

See "

Global Interface Features" on page 39

for settings configurable by all interface types.

Configuring Other Features

If your installation requires different programming than the standard factory default settings,

the following sections of this manual allow configuration of non-interface-specific settings you

might require:

Reading Parameters

Reading Parameters include programming for scanning, beeper and LED

indicators and other universal settings.

1D Symbologies

Includes options concerning the bar code label types (symbologies). These

settings allow you to enable/disable symbologies, set label lengths, require check digit, etc.

WIRELESS FEATURES

Contains programming options for RF, STAR and Bluetooth models only.

Software Version Transmission

The software version of the device can be transmitted over the RS-232 and Keyboard interfaces

by scanning the following label.

Transmit Software Version

RevA

Setup Customizing Configuration Settings

Gryphon™ I GD44XX

GBT4400/GM440X

Resetting the Product Configuration to Defaults

Restore Custom Defaults

If you aren’t sure what programming options are in your imager, or you’ve changed some

options and want to restore the Custom Default Configuration that may have been saved in the

scanner, scan the Restore Custom Default Configuration bar code below. This will restore the

custom configuration for the currently active interface.

Restore Custom Default Configuration

$P,HA00,P(CR)

Custom defaults are based on the interface type. Configure the imager

for the correct interface before scanning this label.

Restore Factory Configuration

If you want to restore the Factory Configuration for your imager, scan either the Restore USA

Factory Configuration bar code or the Restore EU Factory Configuration bar code below. Both

labels restore the scanner configuration to the factory settings, including the interface type. The

USA label restores Label IDs to those historically used in the USA. The EU label restores Label

IDs to those historically used in Europe. The Label ID sets for USA and EU are shown in the

“Label ID Control” section on page 81

of this manual.

$P,AE,P(CR)

Restore USA Factory Configuration

$P,Ae,P(CR)

Restore EU Factory Configuration

The programming items listed in the following sections show the factory default settings for

each of the menu commands.

Customizing Configuration Settings Setup

Product Reference Guide

Replacing the Battery

Before replacing the Battery, read

"Battery Safety" starting on page 14

. Datalogic recommends

annual replacement of rechargeable battery packs to ensure maximum performance.

To change the battery of your reader, complete the following instructions.

1. With a screwdriver, unscrew the battery cover screw.

2. Unscrew and remove the three screws securing the battery holder, and unplug the white

connector.

Connector

Screw

3. Carefully lift out the gold contacts circuit, and remove the battery holder while letting the

white connector pass through the hole in the battery holder (as shown in the picture

below).

Pass-through

hole

Gold

contacts

circuit

Setup Customizing Configuration Settings

Gryphon™ I GD44XX

GBT4400/GM440X

4. Remove the old battery from its place (if present), and insert the new battery in the same

position.

5. Replace the battery holder and three screws, plug in the connector, and return the contacts

circuit to its prev

ious location.

When inserting the new battery into the handle, take care to position the battery

and the connector as shown.

6. Insert the cover in the handle and screw it back into place.

Battery replacement is now complete.

Enter/Exit Programming Mode Keyboard Settings

Gryphon™ I GD44XX

GBT4400/GM440X

Country Mode (Continued)

$CKBCO14(CR)

Country Mode = Lithuanian

Supports only the interfaces listed in the Country

Mode f

eature description.

$CKBCO07(CR)

Country Mode = Norway

$CKBCO12(CR)

Country Mode = Poland

Supports only the interfaces listed in the Country

Mode f

eature description.

Supports only the interfaces listed in the Country

Mod

e feature description.

$CKBCO08(CR)

Country Mode = Portugal

$CKBCO10(CR)

Country Mode = Romania

Supports only the interfaces listed in the Country

Mode f

eature description.

Supports only the interfaces listed in the Country

Mod

e feature description.

$CKBCO0F(CR)

Country Mode = Slovakia

$CKBCO09(CR)

Keyboard Settings Enter/Exit Programming Mode

Product Reference Guide

Country Mode = Spain

$KBCO0A(CR)

Country Mode = Sweden

$CKBCO0B(CR)

Country Mode = Switzerland

Supports only the interfaces listed in the Country

de feature description.

Enter/Exit Programming Mode Keyboard Settings

Gryphon™ I GD44XX

GBT4400/GM440X

Send Control Characters

This feature specifies how the reader transmits ASCII control characters to the host. Reference Appendix E,

Scancode Tables for more information about control characters.

Options are as follows:

Control Character 00 :

Characters from 00 to 0x1F are sent as control character Ctrl+Keys, special keys are located

from 0x80 to 0xA1.

Control Character 01 :

Characters from 00 to 0x1F are sent as control character Ctrl+Shift, special keys are located

from 0x80 to 0xA1.

Control Character 02 :

Special keys are located from 00 to 0x1F and characters from 0x80 to 0xFE are intended as

an extended ASCII table (see "Microsoft Windows Codepage 1252" on page 329).

DEFAULT

$CKBSC00(CR)

Wedge Send Control Characters = 00

$CKBSC01(CR)

Wedge Send Control Characters = 01

$CKBSC02(CR)

Wedge Send Control Characters = 02

Keyboard Settings Enter/Exit Programming Mode

Product Reference Guide

Wedge Quiet Interval

Specifies amount of time to look for keyboard activity before scanner breaks keyboard connection in order to

transmit data to host. The selectable range for this setting is 00 to 990 milliseconds (00-0x63 by 01) in increments

of ten milliseconds.

See page 264 in “References” for detailed information and examples for setting this feature.

$CKBQI

Set Wedge Quiet Interval

To configure this feature, scan the ENTER/EXIT

PROGRAM

MING MODE bar code above, then the

bar code at left followed by the digits from the

Alphanumeric characters in Appendix D, Keypad

representing your desired character(s). End by

scanning the ENTER/EXIT

bar code again.

Make a mistake? Scan the CA

NCEL bar code to

abort and not save the entry string. You can then

start again at the beginning.

CANCEL

DEFAULT

0A = Quiet Interval is

100 milliseconds

Intercode Delay

Specifies the delay between labels transmitted to the host for this interface. The selectable range for this feature is

from 0 to 99 seconds.

See page 266 in “References” for detailed information and examples

for setting

this feature.

$CKBID

Set Intercode Delay

To configure this feature, scan the ENTER/EXIT

PROGRAM

MING MODE bar code above, then the

bar code at left followed by the digits from the

Alphanumeric characters in Appendix D, Keypad

representing your desired character(s). End by

scanning the ENTER/EXIT

bar code again.

Make a mistake? Scan the CA

NCEL bar code to

abort and not save the entry string. You can then

start again at the beginning.

CANCEL

DEFAULT

00 = No Wedge Intercode Delay

Enter/Exit Programming Mode IBM 46XX Interface

Gryphon™ I GD44XX

GBT4400/GM440X

46xx Number of Host Resets

Specifies how many consecutive resets are processed before the reader starts a five-second period

to allow the user to enter Programming Mode and configure the reader. The configurable range

for this feature is 1 to 15 resets.

$CIBHR01(CR)

46xx Number of Host Resets = 1

$CIBHR02(CR)

46xx Number of Host Resets = 2

$CIBHR03(CR)

46xx Number of Host Resets = 3

$CIBHR04(CR)

46xx Number of Host Resets = 4

$CIBHR05(CR)

46xx Number of Host Resets = 5

$CIBHR06(CR)

46xx Number of Host Resets = 6

DEFAULT

$CIBHR07(CR)

46xx Number of Host Resets = 7

IBM 46XX Interface Enter/Exit Programming Mode

Product Reference Guide

46xx Number of Host Resets — cont.

$CIBHR08(CR)

46xx Number of Host Resets = 8

$CIBHR09(CR)

46xx Number of Host Resets = 9

$CIBHR0A(CR)

46xx Number of Host Resets = 10

$CIBHR0B(CR)

46xx Number of Host Resets = 11

$CIBHR0C(CR)

46xx Number of Host Resets = 12

$CIBHR0D(CR)

46xx Number of Host Resets = 13

$CIBHR0E(CR)

46xx Number of Host Resets = 14

$CIBHR0F(CR)

46xx Number of Host Resets = 15

Enter/Exit Programming Mode IBM 46XX Interface

Gryphon™ I GD44XX

GBT4400/GM440X

Transmit Labels in Code 39 Format

This feature enable/disables translation to Code 39 before transmitting label data to an IBM-

46XX or a USB-OEM host. Only the symbology identifier is modified for the translation. The

data is not converted to Code 39 or verified to be valid for Code 39.

Options are:

IBM Standard Format:

Send labels in standard IBM format.

Code 39 Format:

Translate the following symbologies to Code 39:

• USB-OEM: Code128, Code 93, and Codabar

• IBM-Port 5B: Code 128, Code 93, and Codabar

• IBM-Port 9B: Code 93 and Codabar

DEFAULT

$CIBC300(CR)

Transmit Labels in Code 39 Format =

IBM Standard Format

$CIBC301(CR)

Transmit Labels in Code 39 Format = Code 39 Format

Interface Options

$CIFO101(CR)

Obey Scanner Configuration Host Commands

$CIFO102(CR)

Ignore Scanner Configuration Host Commands

DEFAULT

This feature provides for an interface-specific control mechanism.

Product Reference Guide

WAND EMULATION INTERFACE

WAND SIGNAL SPEED on page 72

WAND POLARITY on page 72

WAND IDLE STATE on page 73

TRANSMIT NOISE on page 73

LABEL SYMBOLOGY CONVERSION on page 74

This feature is valid only for the GBT4400 model.

This chapter provides feature/settings configuration for the Wand Emulation interface.

Reference Appendix B for a listing of standard factory settings.

Enter/Exit Programming Mode Wand Emulation Interface

Gryphon™ I GD44XX

GBT4400/GM440X

Wand Signal Speed

This feature specifies the speed of the Wand output signal per nominal bar or space. Choices

are:

• 330 microseconds

• 660 microseconds

$CWASP00(CR)

Wand Signal Speed = 330ms

$CWASP01(CR)

Wand Signal Speed = 660ms

DEFAULT

Wand Polarity

This option specifies the polarity of the Wand output signal. Choices are:

• Quiet zones and spaces are high, bars are low

• Quiet zones and spaces are low, bars are high

$CWAPO00(CR)

Wand Polarity = Quiet Zones & Spaces High, Bars Low

$CWAPO01(CR)

Wand Polarity = Quiet Zones & Spaces Low, Bars High

DEFAULT

TTL logic levels:



0V <= Low <= 0.7V



2.4V <= High <= 5.25V

Wand Emulation Interface Enter/Exit Programming Mode

Product Reference Guide

Wand Idle State

This feature specifies the level of the Wand output signal when the reader is idle.

$CWAID00(CR)

Wand Idle State = Low

$CWAID01(CR)

Wand Idle State = High

DEFAULT

TTL logic levels:



0V <= Low <= 0.7V



2.4V <= High <= 5.25V

Transmit Noise

This option specifies the leading/trailing noise for the Wand interface.

DEFAULT

$CWATN00(CR)

Transmit Noise = Disable

$CWATN01(CR)

Transmit Noise = Transmit leading noise

$CWATN02(CR)

Transmit Noise = Transmit trailing noise

$CWATN03(CR)

Transmit Noise = Transmit leading and trailing noise

Enter/Exit Programming Mode Wand Emulation Interface

Gryphon™ I GD44XX

GBT4400/GM440X

Label Symbology Conversion

When this feature is enabled for the Wand Emulation interface, all bar code labels are converted

to a single symbology.

Options are:

• No conversion

• Convert to Code 39 symbology

• Convert to Code 39 Full ASCII

• Convert to Code 128 symbology

DEFAULT

$CWASC00(CR)

Label Symbology Conversion = No conversion

$CWASC01(CR)

Label Symbology Conversion = Convert to Code 39

$CWASC03(CR)

Label Symbology Conversion =

Convert to Code 39 Full ASCII

$CWASC02(CR)

Label Symbology Conversion = Convert to Code 128

Product Reference Guide

DATA FORMAT

GLOBAL PREFIX/SUFFIX starting on page 76

GLOBAL AIM ID starting on page 77

LABEL ID starting on page 80

•Label ID: Pre-Loaded Sets

•Individually Set Label ID

•Label ID Control

•Label ID Symbology Selection • 1D Symbologies

•Label ID Symbology Selection • 2D Symbologies

CASE CONVERSION starting on page 87

CHARACTER CONVERSION starting on page 88

CAUTION

It is not recommended to use these features with IBM interfaces.

The features in this chapter can be used to build specific user-defined data into a message

string. See “References” starting on page 268 for more detailed instructions on setting these

features.

Enter/Exit Programming Mode Global Prefix/Suffix

Gryphon™ I GD44XX

GBT4400/GM440X

Global Prefix/Suffix

This option sets up to 20 characters each from the set of ASCII characters or any hex value from

00 to FF. The characters may be added as a prefix (in a position before the bar code data, also

called a header) and/or as a suffix (in a position following the bar code data, also called a footer).

See page 269 for more detailed instructions on setting th

is feature.

To configure this feature, scan the ENTER/EXIT PROGRAMMING MODE ba

r code above

to place the unit in Programming Mode, then the “Set Global Prefix” or “Set Global Suffix,”

bar code followed by the digits (in hex) from the Alphanumeric characters in Appendix D,

Keypad representing your desired character(s). If l

ess than the expected string of 20 characters

are selected, scan the ENTER/EXIT bar code to terminate the s

tring. Exit programming mode

by scanning the ENTER/EXIT bar code again.

$CLFPR

Set Global Prefix

$CLFSU

Set Global Suffix

Make a mistake? Scan the CANCEL bar code to abort and not

save the entry string. You can then start again at the begin-

ning.

CANCEL

DEFAULT

No Global Prefix

Global Suffix = 0x0D (CR)

Global AIM ID Enter/Exit Programming Mode

Product Reference Guide

Global AIM ID

This feature enables/disables addition of AIM IDs for all symbology

types.

AIM label identifiers (as opposed to custom characters you select yourself as with label

identifiers) can be included with scanned bar code data. See Table 2 on page 3-77 for a listing of

AIM IDs.

AIM label identifiers consist of three characters as follows:

• A close brace character (ASCII ‘]’), followed by...

• A code character (see some samples in the table below), followed by...

• A modifier character (the modifier character is symbol dependent).

DEFAULT

$CAIEN00(CR)

Global AIM ID = Disable

$CAIEN01(CR)

Global AIM ID = Enable

Table 2

. AIM IDs

Tag Name

AIM ID code

character

AIM ID code

ASCII value

ABC CODABAR X 58

ANKER PLESSEY N 4E

AZTEC z 7A

CHINA SENSIBLE CODE X 58

CODABAR F 46

CODE11 H 48

CODE128 C 43

CODE32 A 41

CODE39 A 41

CODE39 CIP X 58

CODE39 DANISH PPT X 58

CODE39 LAPOSTE X 58

CODE39 PZN X 58

CODE93 G 47

DATABAR 14 e 65

DATABAR 14 COMPOSITE e 65

DATABAR EXPANDED e 65

Enter/Exit Programming Mode Global AIM ID

Gryphon™ I GD44XX

GBT4400/GM440X

DATABAR EXPANDED

COMPOSITE e 65

DATABAR LIMITED e 65

DATABAR LIMITED COMPOSITE e 65

DATA MATRIX d 64

EAN128 C 43

EAN128 COMPOSITE C 43

EAN13 E 45

EAN13 P2 E 45

EAN13 P5 E 45

EAN13 COMPOSITE E 45

EAN8 E 45

EAN8 P2 E 45

EAN8 P5 E 45

EAN8 COMPOSITE E 45

FOLLET 2OF5 X 58

I2OF5 I 49

IATA INDUSTRIAL 2OF5 X 58

INDUSTRIAL 2OF5 X 58

ISBN X 58

ISBT128 CONCAT X 58

ISSN X 58

MAXICODE U 55

MICRO QR Q 51

MICRO PDF L 4C

MSI M 4D

PDF417 L 4C

PLESSEY P 50

POSTAL AUSTRALIAN X 58

POSTAL IMB X 58

POSTAL JAPANESE X 58

POSTAL KIX X 58

POSTAL PLANET X 58

POSTAL PORTUGAL X 58

POSTAL POSTNET BB X 58

POSTAL ROYAL MAIL X 58

POSTAL SWEDISH X 58

POSTNET X 58

QR CODE Q 51

S25 S 53

TRIOPTIC X 58

UPCA E 45

UPCA P2 E 45

UPCA P5 E 45

UPCA COMPOSITE E 45

UPCE E 45

UPCE P2 E 45

UPCE P5 E 45

UPCE COMPOSITE E 45

Global AIM ID Enter/Exit Programming Mode

Product Reference Guide

Set AIM ID Individually for GS1-128

This feature configures a Label ID individually for the GS1-128 symbology and the

programming for this works the same way as Label ID. See Label ID: Set Individually Per

Symbology, starting on page 274 for detailed instructions on se

tting this feature.

$CU8AI00(CR)

Set AIM ID Individually for GS1-128 = Disable

$CU8AI01(CR)

Set AIM ID Individually for GS1-128 = Enable

DEFAULT

Enter/Exit Programming Mode Label ID

Gryphon™ I GD44XX

GBT4400/GM440X

Label ID

A Label ID is a customizable code of up to three ASCII characters (convert to Hex using the

ASCII Chart on the inside back cover of this manual), used to identify a bar code symbology

type. It can be appended previous to or following the transmitted bar code data depending upon

how this option is enabled. This feature provides options for configuring custom Label IDs or

individually per symbology (see "Individually Set Label ID" on page 81). If you wish to

program the reader to always include an industry standard label identifier for ALL symbology

types,

see the previous feature "Global AIM ID" on page 77.

See Label ID, starting on page 271 of “References” for more information on setting this feature.

Label ID: Pre-Loaded Sets

The reader supports two pre-loaded sets of Label IDs. See Label ID: Pre-loaded Sets, starting on

page 271 for details on the USA set and EU set.

CAUTION

$AE(CR)

Label ID Pre-loaded Set = USA Set

$Ae(CR)

Label ID Pre-loaded Set = EU Set

DEFAULT

When changing from one Label ID set to another, all other reader

configuration settings, including the host interface type, will be

erased and set to the standard factory defaults. Any custom config-

uration or custom defaults will be lost.

Label ID Enter/Exit Programming Mode

Product Reference Guide

Individually Set Label ID

This feature configures a Label ID individually for a single symbology. To set, first define

whether you want it as a prefix or suffix by scanning a label below. Then turn to Label ID

Symbology Selection • 1D Symbologies, starting on page 82 to select the symbology you want

to set, followed by up to 3 characters from the ASCII Chart at th

e back of this manual. See

"Label ID: Set Individually Per Symbology" on page 274 f

or detailed instructions on setting this

feature.

Label ID Control

This option controls whether a Label ID is disabled, or sent as a prefix or suffix for a given

symbology type.

DEFAULT

$CIDCO00(CR)

Label ID Transmission = Disable

$CIDCO01(CR)

Label ID Transmission = Enable as Prefix

$CIDCO02(CR)

Label ID Transmission = Enable as Suffix

Enter/Exit Programming Mode Label ID

Gryphon™ I GD44XX

GBT4400/GM440X

Label ID Symbology Selection − 1D Symbologies

This option selects the symbology for which a Label ID is to be configured. See "Label ID" on

page 80 or page 274 in “References” for more detailed instructions.

$CACID

If less than the expected string of 3 characters are selected, scan the ENTER/

EXIT bar code twice to accept the selection and exit Programming Mode.

Set ABC Codabar Label ID Character(s)

$CP3ID

Set Code 32 Pharmacode Label ID Character(s)

$CALID

Set Anker Plessey Label ID Character(s)

$CC9ID

Set Code 93 Label ID Character(s)

$CPAID

Set Australian Postal Code Label ID Character(s)

$CI8ID

Set Concatenated ISBT 128 Label ID Character(s)

$CCBID

Set Codabar Label ID Character(s)

$CDPID

Set Danish PPT Label ID Character(s)

$CC1ID

Set Code 11 Label ID Character(s)

$C3BID

Set EAN 13 Label ID Character(s)

$CC8ID

Set Code 128 Label ID Character(s)

$C3MID

Set EAN 13 Composite Label ID Character(s)

$CC3ID

Set Code 39 Label ID Character(s)

$C32ID

Set EAN 13 P2 Label ID Character(s)

Label ID Enter/Exit Programming Mode

Product Reference Guide

Label ID Symbology Selection − 1D Symbologies (continued)

$CCCID

Set Code 39 CIP Label ID Character(s)

$C35ID

Set EAN 13 P5 Label ID Character(s)

$C8BID

Set EAN 8 Label ID Character(s)

$CXCID

Set GS1 DataBar Expanded Composite

Label ID Character(s)

$C8MID

Set EAN 8 Composite Label ID Character(s)

$CU8ID

Set GS1-128 Label ID Character(s)

$C82ID

Set EAN 8 P2 Label ID Character(s)

$CUMID

Set GS1-128 Composite Label ID Character(s)

$C85ID

Set EAN 8 P5 Label ID Character(s)

$CLBID

Set GSI DataBar Limited Label ID Character(s)

$CF2ID

Set Follett 2 of 5 Label ID Character(s)

$CLCID

GSI DataBar Limited Composite Label ID Character(s)

$C4BID

Set GS1 DataBar 14 Label ID Character(s)

$CG2ID

Set GTIN 2 Label ID Character(s)

$C4CID

Set GS1 DataBar 14 Composite Label ID Character(s)

$CG5ID

Set GTIN 5 Label ID Character(s)

Enter/Exit Programming Mode Label ID

Gryphon™ I GD44XX

GBT4400/GM440X

Label ID Symbology Selection − 1D Symbologies (continued)

$CXBID

Set GS1 DataBar Expanded Label ID Character(s)

$CGBID

Set GTIN 8 Label ID Character(s)

$CIAID

Set IATA Industrial 2 of 5 Label ID Character(s)

$CLPID

Set LaPoste Code 39 Label ID Character(s)

$CPMID

Set IMB Postal Code Label ID Character(s)

$CMSID

Set MSI Label ID Character(s)

$CU2ID

Set Industrial 2 of 5 Label ID Character(s)

$CPPID

Set Planet Postal Code Label ID Character(s)

$CI2ID

Set Interleaved 2 of 5 Label ID Character(s)

$CPLID

Set Plessey Label ID Character(s)

$CISID

Set ISBN Label ID Character(s)

$CPGID

Set Portugal Postal Code Label ID Character(s)

$CINID

Set ISSN Label ID Character(s)

$CPNID

Set Postnet Label ID Character(s)

$CPJID

Set Japan Postal Code Label ID Character(s)

$CPKID

Set Kix Postal Code Label ID Character(s)

Label ID Enter/Exit Programming Mode

Product Reference Guide

Label ID Symbology Selection − 1D Symbologies (continued)

$CPZID

Set PZN Code Label ID Character(s)

$CPBID

Set Postnet BB Label ID Character(s)

$CPRID

Set Royal Postal Code Label ID Character(s)

$CAMID

Set UPC-A Composite Label ID Character(s)

$CS2ID

Set Standard 2 of 5 Label ID Character(s)

$CA2ID

Set UPC-A P2 Label ID Character(s)

$CPSID

Set Swedish Postal Code Label ID Character(s)

$CA5ID

Set UPC-A P5 Label ID Character(s)

$CCTID

Set Trioptic Code Label ID Character(s)

$CEBID

Set UPC-E Label ID Character(s)

$CABID

Set UPC-A Label ID Character(s)

$CE5ID

Set UPC-E P5 Label ID Character(s)

$CAZID

Set Aztec Label ID Character(s)

$CMXID

Set Maxicode Label ID Character(s)

$CCSID

Set China Sensible Label ID Character(s)

$CP4ID

Set PDF 417 Label ID Character(s)

$CDMID

Set Data Matrix Label ID Character(s)

$CMIID

Set Micro PDF 417 Label ID Character(s)

$CMQID

Set Micro QR Label ID Character(s)

$CQRID

Set QR Code Label ID Character(s)

Enter/Exit Programming Mode Label ID

Gryphon™ I GD44XX

GBT4400/GM440X

Label ID Symbology Selection − 2D Symbologies

Label ID Enter/Exit Programming Mode

Product Reference Guide

Advanced Formatting: User Label Edit

Advanced formatting is available to create user label edit scripts. See the Datalogic Aladdin

configuration application or contact Technical Support.

Case Conversion

This feature allows conversion of the case of all alphabetic characters to upper or lower case.

DEFAULT

$CLFCA00(CR)

Case Conversion = Disable (no case conversion)

$CLFCA01(CR)

Case Conversion = Convert to upper case

$CLFCA02(CR)

Case Conversion = Convert to lower case

Case conversion affects ONLY scanned bar code data, and does not affect Label

ID, Prefix, Suffix, or other appended data.

Enter/Exit Programming Mode Label ID

Gryphon™ I GD44XX

GBT4400/GM440X

Character Conversion

Character conversion is an eight byte configuration item. The eight bytes are 4 character pairs

represented in hexadecimal ASCII values. The first character in the pair is the character that will

be converted. The second character in the pair is the character to convert to. If the character to

convert in a pair is FF, then no conversion is done.

$CLFCH

Configure Character Conversion

DEFAULT

0xFFFFFFFFFFFFFFFF

(No character conversion)

If less than the expected string of 16 characters are selected, scan the ENTER/

EXIT bar code twice to accept the selections and exit Programming Mode.

Product Reference Guide

READING PARAMETERS

DOUBLE READ TIMEOUT starting on page 90

LED AND BEEPER INDICATORS starting on page 92

•Power On Alert

•Good Read: When to Indicate

•Good Read Beep Type

•Good Read Beep Frequency

•Good Read Beep Length

•Good Read Beep Volume

•Good Read LED Duration

SCANNING FEATURES starting on page 97

•Scan Mode

•Stand Mode Indication

•Stand Operation

•Pick Mode

•Stand Mode Sensitivity

•Stand Mode Illumination Off Time

•Scanning Active Time

•Stand Illumination Control

•Flash On Time

•Flash Off Time

•Aiming Pointer

•Aiming Duration Timer

•Green Spot Duration

•Mobile Phone Mode

•Partial Label Reading Control

•Decode Negative Image

•Image Capture

CORDED ONLY FEATURES starting on page 107

•Corded Stand Mode

•Corded Stand Beep

MULTIPLE LABEL READING starting on page 109

•Multiple Labels per Frame

•Multiple Labels Ordering by Code Symbology

•Multiple Labels Ordering by Code Length

Enter/Exit Programming Mode Reading Parameters

Gryphon™ I GD44XX

GBT4400/GM440X

Double Read Timeout

Double Read Timeout prevents a double read of the same label by setting the minimum time

allowed between reads of labels of the same symbology and data. If the unit reads a label and

sees the same label again within the specified timeout, the second read is ignored. Double Read

Timeout does not apply to scan modes that require a trigger pull for each label read.

$CSNDR0A(CR)

Double Read Timeout = 0.1 Second

$CSNDR14(CR)

Double Read Timeout = 0.2 Second

$CSNDR1E(CR)

Double Read Timeout = 0.3 Second

$CSNDR28(CR)

Double Read Timeout = 0.4 Second

$CSNDR32(CR)

Double Read Timeout = 0.5 Second

$CSNDR3C(CR)

Double Read Timeout = 0.6 Second

DEFAULT

$CSNDR46(CR)

Double Read Timeout = 0.7 Second

Reading Parameters Enter/Exit Programming Mode

Product Reference Guide

Double Read Timeout — continued

$CSNDR50(CR)

Double Read Timeout = 0.8 Second

$CSNDR5A(CR)

Double Read Timeout = 0.9 Second

$CSNDR64(CR)

Double Read Timeout = 1 Second

Enter/Exit Programming Mode Reading Parameters

Gryphon™ I GD44XX

GBT4400/GM440X

LED AND BEEPER INDICATORS

Power On Alert

Disables or enables the indication (from the Beeper) that the reader is receiving power.

$CBPPU00(CR)

Power On Alert = Disable (No Audible Indication)

$CBPPU01(CR)

Power On Alert = Power-up Beep

DEFAULT

Good Read: When to Indicate

This feature specifies when the reader will provide indication (beep and/or flash its green LED)

upon successfully reading a bar code.

DEFAULT

$CBPIN00(CR)

Indicate Good Read = After Decode

$CBPIN01(CR)

Indicate Good Read = After Transmit

$CBPIN02(CR)

Indicate Good Read =

After CTS goes inactive then active

Reading Parameters Enter/Exit Programming Mode

Product Reference Guide

Good Read Beep Type

Specifies whether the good read beep has a mono or bitonal beep sound.

DEFAULT

$CBPTY00(CR)

Good Read Beep Type = Mono

$CBPTY01(CR)

Good Read Beep Type = Bitonal

Good Read Beep Frequency

Adjusts the good read beep to sound at a selectable low, medium or high frequency, selectable

from the list below. (Controls the beeper’s pitch/tone.)

$CBPFR00(CR)

Good Read Beep Frequency = Low

$CBPFR01(CR)

Good Read Beep Frequency = Medium

DEFAULT

$CBPFR02(CR)

Good Read Beep Frequency = High

Enter/Exit Programming Mode Reading Parameters

Gryphon™ I GD44XX

GBT4400/GM440X

Good Read Beep Length

$CBPLE06(CR)

Good Read Beep Length = 60 msec

$CBPLE08(CR)

Good Read Beep Length = 80 msec

DEFAULT

$CBPLE0A(CR)

Good Read Beep Length = 100 msec

$CBPLE0C(CR)

Good Read Beep Length = 120 msec

$CBPLE0E(CR)

Good Read Beep Length = 140 msec

$CBPLE10(CR)

Good Read Beep Length = 160 msec

$CBPLE12(CR)

Good Read Beep Length = 180 msec

$CBPLE14(CR)

Good Read Beep Length = 200 msec

Reading Parameters Enter/Exit Programming Mode

Product Reference Guide

Good Read Beep Volume

Selects the beeper volume (loudness) upon a good read beep. There are three selectable volume

levels.

$CBPVO00CR)

Good Read Beep Volume = Beeper Off

$CBPVO01CR)

Good Read Beep Volume = Low

$CBPVO02CR)

Good Read Beep Volume = Medium

$CBPVO03CR)

Good Read Beep Volume = High

DEFAULT

Enter/Exit Programming Mode Reading Parameters

Gryphon™ I GD44XX

GBT4400/GM440X

Good Read LED Duration

This feature specifies the amount of time that the Good Read LED remains on following a good

read. The good read LED on time can be set within a range of 100 milliseconds to 25,500

milliseconds (0.1 to 25.5 seconds) in 100ms increments. A setting of 00 keeps the LED on until

the next trigger pull.

See page 277 in “References” for detailed instructions and examples for setting

this feature.

$CLAGL00(CR)

Good Read LED Duration Setting =

Keep LED on until next trigger pull

$CLAGL

Select Good Read LED Duration Setting

To configure this feature, sc

an the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the bar code

left followed by the digits from the Alphanumeric

characters in

Appendix D, Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

bar c

ode again.

Make a mistake? Scan the CANCEL bar code to abort

and not sa

ve the entry string. You can then start again at

the beginning.

CANCEL

DEFAULT

003 = Good Read LED

stays on for 300 ms.

Indicators are dimmed during sleep.

Reading Parameters Enter/Exit Programming Mode

Product Reference Guide

SCANNING FEATURES

Scan Mode

Selects the reader’s scan operating mode. See page 278 in “References” for descriptions.

$CSNRM00(CR)

Scan Mode = Trigger Single

DEFAULT

$CSNRM01(CR)

Scan Mode = Trigger Hold Multiple

$CSNRM02(CR)

Scan Mode = Trigger Pulse Multiple

$CSNRM03(CR

Scan Mode = Flashing

$CSNRM04(CR)

Scan Mode = Always On

$CSNRM05(CR

Scan Mode = Stand Mode

Options concerning Stand Mode behavior are available at the following

feature,

Stand Operation

Enter/Exit Programming Mode Reading Parameters

Gryphon™ I GD44XX

GBT4400/GM440X

Stand Mode Indication

This operation is useful for indicating when the reader is in Stand Mode. If enabled, the blue

indicator will blink when Stand Mode scanning is active. If reader detects motion (or removed

from base station for cordless models) and switches out of Stand Mode into Triggered Mode,

blinking will stop until Stand Mode is active again.

DEFAULT

$CSMFL00(CR)

Stand Mode Indication = Disable

$CSMFL01(CR)

Stand Mode Indication = Enable

Reading Parameters Enter/Exit Programming Mode

Product Reference Guide

Stand Operation

Specifies the behavior of the reader when stationary in a stand. There are two conditions which

cause the reader to switch to Stand Mode:

1. The reader is configured to switch to Stand Mode when stationary.

2. The reader is placed into the cradle of the base station.

Below are further options concerning Stand Operation.

Ignore Autorecognition.

Disables mode switching when the reader is placed in a stand.

Switch to Stand Mode.

Automatically switches the reader to Stand Mode when the reader is

placed in the stand.

Switch to Flashing.

Automatically switches the reader to Flash Mode when the reader is placed

in the stand.

Switch to Always On.

Automatically switches the reader to Always On mode when the reader is

placed in the stand

$CSMSD00(

CR)

Do Not Change Mode

$CSMSD01(

CR)

Change to Stand Mode

DEFAULT

$CSMSD02(CR)

Change to Always On

$CSMSD03(CR)

Change to Flashing

Enter/Exit Programming Mode Reading Parameters

100

Gryphon™ I GD44XX

GBT4400/GM440X

Pick Mode

Specifies the ability of the reader to decode labels only when they are close to the center of the

aiming pattern. This allows the reader to accurately target labels when they are placed close

together, such as on a pick sheet.

This feature is not compatible with Multiple Labels Reading in a Volume.

DEFAULT

$CSNPM00(CR)

Pick Mode = Disable

$CSNPM01(CR)

Pick Mode = Enable

Stand Mode Sensitivity

Sets the sensitivity level for stand mode wakeup. Choices are low, medium and high.

$CSMSE00(CR)

Stand Mode Sensitivity = Low

$CSMSE01(CR)

Stand Mode Sensitivity = Medium

DEFAULT

$CSMSE02(CR)

Stand Mode Sensitivity = High

Reading Parameters Enter/Exit Programming Mode

Product Reference Guide

101

Stand Mode Illumination Off Time

Specifies the amount of time reader illumination stays off after pulling the trigger when in Stand

Mode. The configurable range is 01 to 32 by 01 in increments of 500ms (500ms to 16 seconds).

See page 279 in “References” for a description of this feature.

$CSNTM

Select Stand Mode Time Setting

To configure this feature, scan

the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the bar code

left followed by the digits from the Alphanumeric

characters in

Appendix D, Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

bar co

de again.

DEFAULT

04 = 2 Seconds

Scanning Active Time

This setting specifies the amount of time that the reader stays in scan ON state once the state is

entered. The range for this setting is from 1 to 255 seconds in 1-second increments. See

page 280 in “References” for further description of this feature.

$CSNET03(CR)

Scanning Active Time = 3 seconds

$CSNET05(CR)

Scanning Active Time = 5 seconds

DEFAULT

$CSNET08(CR)

Scanning Active Time = 8 seconds

Enter/Exit Programming Mode Reading Parameters

102

Gryphon™ I GD44XX

GBT4400/GM440X

Stand Illumination Control

Controls the illumination status while the reading mode is stand mode and the reader is

attempting to detect objects.

DEFAULT

$CSMIL00(CR)

Stand Illumination Control = OFF

$CSMIL01(CR)

Stand Illumination Control = ON

$CSMIL02(CR)

Stand Illumination Control = Dim

Motion Still Timeout

Motion Still Timeout specifies the waiting time after which no motions is detected. When no

motion is detected for period of time longer than the set Motion Still Timeout period, the

scanner assumes it is in a motionless condition. The selectable setting are from 500 to 25,500

milliseconds in 100 millisecond increments. The default is 2 seconds. This option relates to

such features and the Aimer On timing and Stand Mode Object Sense scanning with respect to

motion. See page 289 in "References" for detailed information on setting this feature.

$CMOTO/r

Select Motion Still Timeout Setting

To configure this feature, scan the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the bar code

left followed by the digits from the Alphanumeric

characters in

Appendix D, Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

bar c

ode again.

Make a mistake? Scan the CANCEL bar code to abort

and not sa

ve the entry string. You can then start again at

the beginning.

CANCEL

DEFAULT

14 = Motion Still Timeout for 2 seconds

Reading Parameters Enter/Exit Programming Mode

Product Reference Guide

103

Flash On Time

This feature specifies the ON time for the indicator LED while in Flash Mode. The selectable

range is 100 to 9,900 milliseconds (0.1 to 9.9 seconds), in 100 millisecond increments. See

page 282 in “References” for detailed information on setting this feature.

$CSNFN

Select Flash ON Time Setting

To configure this feature, scan

the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the bar code

left followed by the digits from the Alphanumeric

characters in

Appendix D, Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

bar co

de again.

Make a mistake? Scan the CANCEL bar code to abort

and not sa

ve the entry string. You can then start again at

the beginning.

CANCEL

DEFAULT

10 = Flash is ON for 1 Second

Flash Off Time

This feature specifies the OFF time for the indicator LED while in Flash Mode. The selectable

range is 100 to 9,900 milliseconds (0.1 to 9.9 seconds), in 100 millisecond increments. See

page 283 in “References” for detailed information on setting this feature.

$CSNFF

Select Flash OFF Time Setting

To configure this feature, scan the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the bar code

left followed by the digits from the Alphanumeric

characters in

Appendix D, Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

bar co

de again.

Make a mistake? Scan the CANCEL bar code to abort

and not sa

ve the entry string. You can then start again at

the beginning.

CANCEL

DEFAULT

06 = Flash is OFF for 600ms

Enter/Exit Programming Mode Reading Parameters

104

Gryphon™ I GD44XX

GBT4400/GM440X

Aiming Pointer

Enables/disables the aiming pointer for all symbologies.

$CTAAP00(CR)

Aiming Pointer = Disable

$CTAAP01(CR)

Aiming Pointer = Enable

DEFAULT

Aiming Duration Timer

Specifies the frame of time the aiming pointer remains on after decoding a label, when in trigger

single mode.The range for this setting is from 1 to 255 seconds in 1-second increments. See

page 281 in “References” for a description of this feature.

DEFAULT

LSTM00

Aiming Off After Decoding

LSTM

Set Aiming Duration Timer

To configure, scan the ENTER/EXIT PROGRAMMING

MODE ba

r code above, then the bar code at left fol-

lowed by the digits from the Alphanumeric characters

Appendix D, Keypad representing your desired

character(s). End by scanning the ENTER/EXIT bar code.

Make a mistake? Scan the CANCEL bar code to abort

and not sa

ve the entry string. You can then start again at

the beginning.

CANCEL

Reading Parameters Enter/Exit Programming Mode

Product Reference Guide

105

Green Spot Duration

Specifies the duration of the good read pointer beam after a good read.

$CLSSP00(CR)

Green Spot Duration = Disable (Green Spot is Off)

$CLSSP01(CR)

Green Spot Duration = Short (300 msec)

DEFAULT

$CLSSP02(CR)

Green Spot Duration = Medium (500 msec)

$CLSSP03(CR)

Green Spot Duration = Long (800 msec)

Mobile Phone Mode

This mode is useful for scanning bar codes displayed on a mobile phone. Other options for this

feature can be configured using the Datalogic Aladdin application.

$CSNPE00(CR)

Mobile Phone Mode = Disable

$CSNPE01(CR)

Mobile Phone Mode = Enable

DEFAULT

Enter/Exit Programming Mode Reading Parameters

106

Gryphon™ I GD44XX

GBT4400/GM440X

Partial Label Reading Control

Enable/Disable to ignore partial labels to be read within the boundary of the field of view.

IPPL00

Partial Label Reading Control = Disable

IPPL01

Partial Label Reading Control = Enable

Decode Negative Image

Enable/Disable the ability to decode a negative image for all symbologies. When this feature is

enabled, you will be unable to read normally-printed labels or programming labels in this

manual. Scan the “Disable” bar code below to return the scanner to its default for this feature.

To set decoding for only 2D codes, go to 2D Normal/Inverse Symbol Control" on page 205.

For additional options, see the Al

addin configuration application.

CAUTION

$P,CIPVR00,P(CR)

Decode Negative Image = Disable

DEFAULT

$P,CIPVR01,P(CR)

Decode Negative Image = Enable

When this feature is enabled, you will be unable to read other programming

labels in this manual.

Unlike some programming features and options, Decode Negative Image selec-

tions require that you scan only one programming bar code label. DO NOT scan

an ENTER/EXIT bar code prior to scanning a Decode Negative Image bar code.

Image Capture

For information and a list of options for Image Capture, use the Datalogic Aladdin

configuration application, available for free download from the Datalogic Scanning website.

EAN 13 (Jan 13) Enter/Exit Programming Mode

Product Reference Guide

121

EAN-13 Flag 1 Character

Enables/disables transmission of an EAN/JAN13 Flag1 character. The Flag 1 character is the

first character of the label.

$C3BF100(CR)

EAN-13 Flag 1 Char= Don’t transmit

$C3BF101(CR)

EAN-13 Flag 1 Char= Transmit

DEFAULT

EAN-13 ISBN Conversion

This option enables/disables conversion of EAN 13/JAN 13 Bookland labels starting with 978

to ISBN labels.

DEFAULT

$C3BIS00(CR)

EAN-13 ISBN Conversion = Disable

$C3BIS01(CR)

EAN-13 ISBN Conversion = Convert to ISBN

Enter/Exit Programming Mode ISSN

122

Gryphon™ I GD44XX

GBT4400/GM440X

EAN-13 2D Component

This feature enables/disables a requirement that a 2D label component be decoded when a base

label of this symbology is decoded.

DEFAULT

$C3B2D00(CR)

EAN-13 2D Component =

Disable (2D component not required)

$C3B2D01(CR)

EAN-13 2D Component =

2D component must be decoded

ISSN

The following options apply to the ISSN symbology.

ISSN Enable/Disable

Enables/disables conversion of EAN/JAN13 Bookland labels starting with 977 to ISSN labels.

DEFAULT

$C3BIN00(CR)

ISSN = Disable

$C3BIN01(CR)

ISSN = Enable

EAN 8 (Jan 8) Enter/Exit Programming Mode

Product Reference Guide

123

EAN 8 (JAN 8)

The following options apply to the EAN 8 (Jan 8) symbology.

EAN 8 Enable/Disable

When disabled, the reader will not read EAN 8/JAN 8 bar codes.

$C8BEN00(CR)

EAN 8 = Disable

$C8BEN01(CR)

EAN 8 = Enable

DEFAULT

EAN 8 Check Character Transmission

Enable this option to transmit the check character along with EAN 8 bar code data.

$C8BCT00(CR)

EAN 8 Check Character Transmission = Don’t Send

$C8BCT01(CR)

EAN 8 Check Character Transmission = Send

DEFAULT

Enter/Exit Programming Mode EAN 8 (Jan 8)

124

Gryphon™ I GD44XX

GBT4400/GM440X

Expand EAN 8 to EAN 13

Enable this option to expand EAN 8/JAN 8 labels to EAN 13/JAN 13.

DEFAULT

$C8B3B00(CR)

Expand EAN 8 to EAN 13 = Disable

$C8B3B01(CR)

Expand EAN 8 to EAN 13 = Enable

EAN 8 2D Component

This feature enables/disables a requirement that a 2D label component be decoded when a base

label for this symbology is decoded.

DEFAULT

$C8B2D00(CR)

EAN 8 2D Component =

Disable (2D component not required)

$C8B2D01(CR)

EAN 8 2D Component =

2D component must be decoded

UPC/EAN Global Settings Enter/Exit Programming Mode

Product Reference Guide

125

UPC/EAN GLOBAL SETTINGS

This section provides configuration settings for UPC-A, UPC-E, EAN 13 and EAN 8

symbologies, and affects all of these unless otherwise marked for each feature description.

UPC/EAN Price Weight Check

This feature enables/disables calculation and verification of price/weight check digits.

DEFAULT

$CPWEN00(CR)

Price Weight Check = Disabled

$CPWEN01(CR)

Price Weight Check = 4-digit price-weight check

$CPWEN02(CR)

Price Weight Check = 5-digit price-weight check

$CPWEN03(CR)

Price Weight Check = European 4-digit price-weight

check

$CPWEN04(CR)

Price Weight Check = European 5-digit price-weight

check

Enter/Exit Programming Mode UPC/EAN Global Settings

126

Gryphon™ I GD44XX

GBT4400/GM440X

UPC/EAN Quiet Zones

This feature specifies the number of quiet zones for UPC/EAN labels. Quiet zones are blank

areas at the ends of a bar code, typically 10 times the width of the narrowest bar or space in the

label. The property applies to all EAN-UPC symbologies globally and to the ADDONs.

DEFAULT

$CUNLO02(CR)

UPC/EAN Quiet Zones = Two Modules

$CUNLO03(CR)

UPC/EAN Quiet Zones = Three Modules

Add-Ons Enter/Exit Programming Mode

Product Reference Guide

127

ADD-ONS

Contact Customer Support for advanced programming of optional and conditional add-ons.

Optional Add-ons

The reader can be enabled to optionally read the following add-ons (supplementals):

DEFAULT

$CADO200(CR)

Optional Add-Ons = Disable P2

$CADO201(CR)

Optional Add-Ons = Enable P2

DEFAULT

$CADO500(CR)

Optional Add-Ons = Disable P5

$CADO501(CR)

Optional Add-Ons = Enable P5

DEFAULT

$CADO800(CR)

Optional Add-Ons = Disable GS1-128

$CADO801(CR)

Optional Add-Ons = Enable GS1-128

If a UPC/EAN base label and an add-on are both decoded, the reader will

transmit the base label and add-on. If a UPC/EAN base label is decoded

without an add-on, the base label will be transmitted without an add-on.



Conditional add-on settings (if enabled) are considered by the reader

before optional add-on settings.

Enter/Exit Programming Mode Add-Ons

128

Gryphon™ I GD44XX

GBT4400/GM440X

Optional Add-On Timer

This option sets the time the reader will look for an add-on when an add-on fragment has been

seen and optional add-ons are enabled. (Also see "Optional GS1-128 Add-On Timer" on

page 131.)

$CADOT01(CR)

Optional Add-on Timer = 10ms

$CADOT02(CR)

Optional Add-on Timer = 20ms

$CADOT03(CR)

Optional Add-on Timer = 30ms

$CADOT04(CR)

Optional Add-on Timer = 40ms

$CADOT05(CR)

Optional Add-on Timer = 50ms

$CADOT06(CR)

Optional Add-on Timer = 60ms

$CADOT07(CR)

Optional Add-on Timer = 70ms

DEFAULT

$CADOT0A(CR)

Optional Add-on Timer = 100ms

$CADOT0C(CR)

Optional Add-on Timer = 120ms

$CADOT0E(CR)

Optional Add-on Timer = 140ms

$CADOT10(CR)

Optional Add-on Timer = 160ms

Add-Ons Enter/Exit Programming Mode

Product Reference Guide

129

Optional Add-On Timer — cont.

$CADOT12(CR)

Optional Add-on Timer = 180ms

$CADOT14(CR)

Optional Add-on Timer = 200ms

$CADOT16(CR)

Optional Add-on Timer = 220ms

$CADOT18(CR)

Optional Add-on Timer = 240ms

$CADOT1A(CR)

Optional Add-on Timer = 260ms

$CADOT1C(CR)

Optional Add-on Timer = 280ms

$CADOT1E(CR)

Optional Add-on Timer = 300ms

Enter/Exit Programming Mode Add-Ons

130

Gryphon™ I GD44XX

GBT4400/GM440X

Optional Add-On Timer — cont.

Add-Ons Enter/Exit Programming Mode

Product Reference Guide

131

Optional GS1-128 Add-On Timer

This option sets the timer expiration value to read the added part after reading the linear EAN/

UPC part. For UPC/EAN add-ons other than those of that type, see "Optional Add-On

Timer" on page 128.

DEFAULT

$CADUT00(CR)

Optional GS1-128 Add-On Timer = Disable

$CADUT01(CR)

Optional GS1-128 Add-On Timer = 10ms

$CADUT02(CR)

Optional GS1-128 Add-On Timer = 20ms

$CADUT03(CR)

Optional GS1-128 Add-On Timer = 30ms

$CADUT04(CR)

Optional GS1-128 Add-On Timer = 40ms

$CADUT05(CR)

Optional GS1-128 Add-On Timer = 50ms

$CADUT06(CR)

Optional GS1-128 Add-On Timer = 60ms

$CADUT07(CR)

Optional GS1-128 Add-On Timer = 70ms

$CADUT0A(CR)

Optional GS1-128 Add-On Timer = 100ms

$CADUT0C(CR)

Optional GS1-128 Add-On Timer = 120ms

$CADUT0E(CR)

Optional GS1-128 Add-On Timer = 140ms

$CADUT10(CR)

Optional GS1-128 Add-On Timer = 160ms

Enter/Exit Programming Mode Add-Ons

132

Gryphon™ I GD44XX

GBT4400/GM440X

Optional GS1-128 Add-On Timer — cont.

Code 32 (Ital Pharmaceutical Code) Enter/Exit Programming Mode

Product Reference Guide

141

Code 32 Feature Setting Exceptions

The following features are set for Code 32 by using these Code 39 settings:

"Code 39 Quiet Zones" on page 137



"Code 39 Length Control" on page 137



"Trioptic Code" on page 140

Code 32 Check Char Transmission

Enable this option to transmit the check character along with Code 32 bar code data.

DEFAULT

$CP3CT00(CR)

Code 32 Check Character Transmission = Don’t Send

$CP3CT01(CR)

Code 32 Check Character Transmission = Send

Code 32 Start/Stop Character Transmission

This option enables/disables transmission of Code 32 start and stop characters

DEFAULT

$CP3SS00(CR)

Code 32 Start/Stop Character Transmission = Don’t

Transmit

$CP3SS01(CR)

Code 32 Start/Stop Character Transmission = Transmit

Enter/Exit Programming Mode Code 39 CIP (French Pharmaceutical)

142

Gryphon™ I GD44XX

GBT4400/GM440X

CODE 39 CIP (FRENCH PHARMACEUTICAL)

The following options apply to the Code 39 CIP symbology.

Code 39 CIP Enable/Disable

Enables/Disables ability of the reader to decode Code 39 CIP labels.

DEFAULT

$CCCEN00(CR)

Code 39 CIP = Disable

$CCCEN01(CR)

Code 39 CIP = Enable

CODE 39 DANISH PPT

The following options apply to the Code 39 Danish PPT symbology.

Code 39 Danish PPT Enable/Disable

Enables/Disables AIM ID for Code 39 Danish PPT Codes.

DEFAULT

$CDPEN00(CR)

Code 39 Danish PPT = Disable

$CDPEN01(CR)

Code 39 Danish PPT = Enable

Code 39 LaPoste Enter/Exit Programming Mode

Product Reference Guide

143

CODE 39 LAPOSTE

The following options apply to the Code 39 LaPoste symbology.

Code 39 LaPoste Enable/Disable

Enables/disables the ability of the scanner to decode Code39 La Poste labels.

DEFAULT

$CLPEN00(CR)

Code 39 LaPoste = Disable

$CLPEN01(CR)

Code 39 LaPoste = Enable

CODE 39 PZN

The following options apply to the Code 39 PZN symbology.

Code 39 PZN Enable/Disable

Enables/disables the ability of the scanner to decode Code39 PZN labels.

DEFAULT

$PZEN00(CR)

Code 39 PZN = Disable

$PZEN01(CR)

Code 39 PZN = Enable

Enter/Exit Programming Mode Code 128

144

Gryphon™ I GD44XX

GBT4400/GM440X

CODE 128

The following options apply to the Code 128 symbology.

Code 128 Enable/Disable

When disabled, the reader will not read Code 128 bar codes.

$CC8EN00(CR)

Code 128 = Disable

$CC8EN01(CR)

Code 128 = Enable

DEFAULT

Expand Code 128 to Code 39

This feature enables/disables expansion of Code 128 labels to Code 39 labels.

DEFAULT

$CC8C300(CR)

Code 128 to Code 39 = Don’t Expand

$CC8C301(CR)

Code 128 to Code 39 = Expand

Code 128 Enter/Exit Programming Mode

Product Reference Guide

145

Code 128 Check Character Transmission

Enable this option to transmit the check character along with Code 128 bar code data.

DEFAULT

$CC8CT00(CR)

Code 128 Check Character Transmission = Don’t Send

$CC8CT01(CR)

Code 128 Check Character Transmission = Send

Code 128 Function Character Transmission

Enables/disables transmission of Code128 function characters 1, 2, 3, and 4.

DEFAULT

$CC8TF00(CR)

Code 128 Function Character Transmission = Don’t Send

$CC8TF01(CR)

Code 128 Function Character Transmission = Send

Enter/Exit Programming Mode Code 128

146

Gryphon™ I GD44XX

GBT4400/GM440X

Code 128 Sub-Code Exchange Transmission

Enables/disables the transmission of “Sub-Code Exchange” characters (NOT transmitted by

standard decoding).

DEFAULT

$CC8SC00(CR)

Code 128 Sub-Code Exchange Transmission = Disable

$CC8SC01(CR)

Code 128 Sub-Code Exchange Transmission = Enable

Code 128 Quiet Zones

This feature specifies the number of quiet zones for Code 128 labels. Quiet zones are blank areas

at the ends of a bar code and are typically 10 times the width of the narrowest bar or space in the

label.

$CC8LO02(CR)

Code 128 Quiet Zones = Quiet Zones on two sides

$CC8LO03(CR)

Code 128 Quiet Zones = Small Quiet Zones on two sides

DEFAULT

Code 128 Enter/Exit Programming Mode

Product Reference Guide

147

Code 128 Length Control

This feature specifies either variable length decoding or fixed length decoding for the Code 128

symbology. See page 267 for more information.

DEFAULT

$CC8LC00(CR)

Code 128 Length Control = Variable Length

$CC8LC01(CR)

Code 128 Length Control = Fixed Length

Enter/Exit Programming Mode Code 128

148

Gryphon™ I GD44XX

GBT4400/GM440X

Code 128 Set Length 1

Specifies one of the bar code lengths for Code 128 Length Control. Length 1 is the minimum

label length if in Variable Length Mode, or the first fixed length if in Fixed Length Mode.

Length includes the bar code’s data characters only. The length can be set from 1 to 80

characters.

Table 5 provides some examples for setting Length 1. See page 267 for detailed instructions on

setting this feature.

Table 5. Code 128 Length 1 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

01 Character 07 Characters 15 Characters 80 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT CODE 128 LENGTH 1 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘1’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘8’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

$CC8L1

Select Code 128 Set Length 1 Setting

Make a mistake? Scan the CANCEL bar code to abort and

not save the entry string. You can then start again at the

beginning.

CANCEL

DEFAULT

01 = Length 1 is 1 Character

Code 128 Enter/Exit Programming Mode

Product Reference Guide

149

Code 128 Set Length 2

This feature specifies one of the bar code lengths for Code 128 Length Control. Length 2 is the

maximum label length if in Variable Length Mode, or the second fixed length if in Fixed Length

Mode. Length includes the bar code’s data characters only.

The length can be set from 1 to 80 characters. A setting of 0 s

pecifies to ignore this length (only

one fixed length).

Table 6 provides examples for setting Length 2. See page 267 for detailed instructions on setting

this feature.

Table 6. Code 128 Length 2 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

00 (Ignore This

Length)

07 Characters 15 Characters 80 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT CODE 128 LENGTH 2 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘8’ and 0’

5 Scan ENTER/EXIT PROGRAMMING MODE

$CC8L2

Select Code 128 Length 2 Setting

Make a mistake? Scan the CANCEL bar code to abort and

not save the entry string. You can then start again at the

beginning.

CANCEL

DEFAULT

80 = Length 2 is 80 Characters

Enter/Exit Programming Mode GS1-128

150

Gryphon™ I GD44XX

GBT4400/GM440X

GS1-128

The following options apply to the GS1-128 symbology. (Also known as USS-128, GS1-128,

GTIN-128, UCC-128, EAN-128.)

GS1-128 Enable

This option enables/disables the ability of the reader to translate GS1-128 labels to the GS1-128

data format. Options are:

• Transmit GS1-128 labels in Code 128 data format.

• Transmit GS1-128 labels in GS1-128 data format.

• Do not transmit GS1-128 labels.

$CU8EN00CR)

GS1-128 = Transmit in Code 128 data format

$CU8EN01CR)

GS1-128 = Transmit in GS1-128 data format

DEFAULT

$CU8EN02CR)

GS1-128 = Do not transmit GS1-128 labels

GS1-128 2D Component

This feature enables/disables a requirement that a 2D label component be decoded when a base

label of this symbology is decoded.

DEFAULT

$CU82D00(CR)

GS1-128 2D Component = Disable

$CU82D01(CR)

GS1-128 2D Component = Enable

Code ISBT 128 Enter/Exit Programming Mode

Product Reference Guide

151

CODE ISBT 128

The following options apply to the ISBT 128 symbology.

ISBT 128 Concatenation

Use this option to enable/disable ISBT128 concatenation of 2 labels.

DEFAULT

$CI8CE00(CR)

ISBN 128 Concatenation = Disable

$CI8CE01(CR)

ISBN 128 Concatenation = Enable

ISBT 128 Force Concatenation

When enabled, this feature forces concatenation for ISBT.

DEFAULT

$CI8FC00(CR)

ISBT 128 Force Concatenation = Disable

$CI8FC01(CR)

ISBT 128 Force Concatenation = Enable

This option is only valid when

ISBT 128 Concatenation

is enabled.

Enter/Exit Programming Mode Code ISBT 128

152

Gryphon™ I GD44XX

GBT4400/GM440X

ISBT 128 Concatenation Mode

Specifies the concatenation mode between Static and Dynamic.

DEFAULT

$CI8CM00CR)

ISBT 128 Concatenation Mode = Static

$CI8CM01CR)

ISBT 128 Concatenation Mode = Dynamic

This option is only valid when ISBT 128 Concatenation is enabled (see "

ISBT 128 Concate-

nation" on page 151

Code ISBT 128 Enter/Exit Programming Mode

Product Reference Guide

153

ISBT 128 Dynamic Concatenation Timeout

Specifies the timeout used by the ISBT 128 Dynamic Concatenation Mode.

$CI8DT05(CR)

ISBT 128 Dynamic Concatenation Timeout = 50 msec

$CI8DT0A(CR)

ISBT 128 Dynamic Concatenation Timeout = 100 msec

DEFAULT

$CI8DT14(CR)

ISBT 128 Dynamic Concatenation Timeout = 200 msec

$CI8DT32(CR)

ISBT 128 Dynamic Concatenation Timeout = 500 msec

$CI8DT4B(CR)

ISBT 128 Dynamic Concatenation Timeout = 750 msec

$CI8DT64(CR)

ISBT 128 Dynamic Concatenation Timeout = 1 second

ISBT 128 Advanced Concatenation Options

To set up pairs of label types for concatenation, use the Datalogic Aladdin configuration

application or contact Datalogic Technical Support, as described on

page 10

Enter/Exit Programming Mode Interleaved 2 of 5 (I 2 of 5)

154

Gryphon™ I GD44XX

GBT4400/GM440X

INTERLEAVED 2 OF 5 (I 2 OF 5)

The following options apply to the I 2 of 5 symbology.

I 2 of 5 Enable/Disable

When disabled, the reader will not read I 2 of 5 bar codes.

DEFAULT

$CI2EN00(CR)

I 2 of 5 = Disable

$CI2EN01(CR)

I 2 of 5 = Enable

ABC Codabar Enter/Exit Programming Mode

Product Reference Guide

175

ABC CODABAR

The following options apply to the ABC Codabar symbology.

ABC Codabar Enable/Disable

Enables/Disables ability of reader to decode ABC Codabar labels.

DEFAULT

$CCBAB00(CR)

ABC Codabar = Disable

$CCBAB01(CR)

ABC Codabar = Enable

ABC Codabar Concatenation Mode

Specifies the concatenation mode between Static and Dynamic.

DEFAULT

$CCBCM00(CR)

ABC Codabar Concatenation Mode = Static

$CCBCM01(CR)

ABC Codabar Concatenation Mode = Dynamic

MSI Enter/Exit Programming Mode

Product Reference Guide

195

MSI Check Character Calculation

Enables/Disables calculation and verification of an optional MSI check character.

$CMSCC00(CR)

MSI Check Character Calculation = Disable

$CMSCC01(CR)

MSI Check Character Calculation = Enable Mod10

DEFAULT

$CMSCC02(CR)

MSI Check Character Calculation = Enable Mod11/10

$CMSCC03(CR)

MSI Check Character Calculation = Enable Mod10/10

MSI Check Character Transmission

Enables/disables transmission of an MSI check character.

$CMSCT00(CR)

MSI Check Character Transmission = Disable

$CMSCT01(CR)

MSI Check Character Transmission = Enable

DEFAULT

Enter/Exit Programming Mode MSI

196

Gryphon™ I GD44XX

GBT4400/GM440X

MSI Length Control

This feature specifies either variable length decoding or fixed length decoding for the

MSI symbology.

Variable Length:

For variable length decoding, a minimum and maximum length may be

set.

Fixed Length:

For fixed length decoding, two different lengths may be set.

DEFAULT

$CMSLC00(CR)

MSI Length Control = Variable Length

$CMSLC01(CR)

MSI = Fixed Length

MSI Enter/Exit Programming Mode

Product Reference Guide

197

MSI Set Length 1

This feature specifies one of the bar code lengths for MSI Length Control. Length 1 is the

minimum label length if in Variable Length Mode, or the first fixed length if in Fixed

Length

Mode. Length includes the bar code’s data characters only. The length can be set

from 01 to 50 characters.

Table 21 provides some examples for setting Length 1. See page 267 for detailed instructions on

setting this feature.

Table 21. MSI Length 1 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting 01 Characters 07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT MSI LENGTH 1 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘1’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

$CMSL1

Select MSI Set Length 1 Setting

Make a mistake? Scan the CANCEL bar code to abort and

not save the entry string. You can then start again at the

beginning.

CANCEL

DEFAULT

01 = Length 1 is 1 Character

Enter/Exit Programming Mode MSI

198

Gryphon™ I GD44XX

GBT4400/GM440X

MSI Set Length 2

This feature specifies one of the bar code lengths for MSI Length Control. Length 2 is the

maximum label length if in Variable Length Mode, or the second fixed length if in Fixed

Length

Mode. Length includes the bar code’s check, data, and full-ASCII shift characters.

The length does not include start/stop characters.

The length can be set from 1 to 50 characters. A setting of 0 specifies to ignore this length

(only one fixed length).

Table 22 provides examples for setting Length 2. See page 267 for detailed instructions on

setting this feature.

Table 22. MSI Length 2 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

00 (Ignore This

Len

gth)

07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT MSI LENGTH 2 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

$CMSL2

Select MSI Length 2 Setting

Make a mistake? Scan the CANCEL bar code to abort and

not save the entry string. You can then start again at the

beginning.

CANCEL

DEFAULT

50 = Length 2 is 50 Characters

Plessey Enter/Exit Programming Mode

Product Reference Guide

199

PLESSEY

The following options apply to the Plessey symbology.

Plessey Enable/Disable

Enables/Disables ability of reader to decode Plessey labels.

DEFAULT

$CPLEN00CR)

Plessey = Disable

$CPLEN01CR)

Plessey = Enable

Plessey Check Character Calculation

Enables/Disables calculation and verification of an optional Plessey check character.

$CPLCC00(CR)

Plessey Check Character Calculation = Disable

$CPLCC01(CR)

Plessey Check Character Calculation =

Enable Plessey std. check char. verification

DEFAULT

$CPLCC02(CR)

Plessey Check Character Calculation =

Enable Anker check char. verification

$CPLCC03(CR)

Plessey Check Character Calculation =

Enable Plessey std. and Anker check char verification

Enter/Exit Programming Mode Plessey

200

Gryphon™ I GD44XX

GBT4400/GM440X

Plessey Check Character Transmission

Enables/disables transmission of an MSI check character.

$CPLCT00(CR)

Plessey Check Character Transmission = Disable

$CPLCT01(CR)

Plessey Check Character Transmission = Enable

DEFAULT

Plessey Length Control

This feature specifies either variable length decoding or fixed length decoding for the Plessey

symbology.

Variable Length:

For variable length decoding, a minimum and maximum length may be set.

Fixed Length:

For fixed length decoding, two different lengths may be set.

DEFAULT

$CPLLC00(CR)

Plessey Length Control = Variable Length

$CPLLC01(CR)

Plessey = Fixed Length

Plessey Enter/Exit Programming Mode

Product Reference Guide

201

Plessey Set Length 1

This feature specifies one of the bar code lengths for Plessey Length Control. Length 1 is the

minimum label length if in Variable Length Mode, or the first fixed length if in Fixed Length

Mode. Length includes the bar code’s data characters only. The length can be

set from 01 to 50

characters.

Table 23 provides some examples for setting Length 1. See page 267 for detailed instructions on

setting this feature.

Table 23. Plessey Length 1 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting 01 Characters 07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT Plessey LENGTH 1 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘1’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

$CPLL1

Select Plessey Set Length 1 Setting

Make a mistake? Scan the CANCEL bar code to abort and

not save the entry string. You can then start again at the

beginning.

CANCEL

DEFAULT

01 = Length 1 is 1 Character

Enter/Exit Programming Mode Plessey

202

Gryphon™ I GD44XX

GBT4400/GM440X

Plessey Set Length 2

This feature specifies one of the bar code lengths for Plessey Length Control. Length 2 is the

maximum label length if in Variable Length Mode, or the second fixed length if in Fixed Length

Mode. Length includes the bar code’s check, data, and full-ASCII shift charac

ters. The length

does not include start/stop characters.

The length can be set from 1 to 50 characters. A setting of

0 specifies

to ignore this length (only

one fixed length).

Table 24 provides examples for setting Length 2. See page 267 for detailed instructions on

setting this feature.

Table 24. Plessey Length 2 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

00 (Ignore This

Len

gth)

07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT PLESSEY LENGTH 2 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

$CPLL2

Select Plessey Length 2 Setting

Make a mistake? Scan the CANCEL bar code to abort and

not save the entry string. You can then start again at the

beginning.

CANCEL

DEFAULT

50 = Length 2 is 50 Characters

Product Reference Guide

203

2D SYMBOLOGIES

2D Global Features

• 2D Maximum Decoding Time, page

204

• 2D Normal/Inverse Symbol Control,

page 205

• 2D Structured Append, page 205

The reader supports the following 2D symbologies (bar code ty

pes). Symbology-dependent

options for each symbology are included in this chapter. See "1D Code Selection" starting on

page 111

for configuration of 1D bar codes.

2D Symbologies

• Aztec Code, page 206 • Micro PDF417, page 221

• China Sensible Code, page 209 • QR Code, page 224

• Data Matrix, page 212 • Micro QR Code, page 227

• Maxicode, page 215 • UCC Composite, page 230

• PDF417, page 218 • Postal Code Selection, page 232

2D Global Features

The following features are common to all, or in some cases, most of the available 2D

symbologies. Default settings are indicated at each feature/option with a green arrow. Also

reference Appendix B, Standard Defaults for a listing of the most widely used set of standard

factory settings. That section also provides space to record any custom settings needed or

implemente

d for your system.

To set most features:

1. Scan the ENTER/EXIT PROGRAMMING bar code at the top of applicable p

rogram-

ming pages.

2. Scan the correct bar code to set the desired programming feature or parameter. You may

need to cov

er unused bar codes on the page, and possibly the facing page, to ensure that

the reader reads only the bar code you intend to scan.

3. If additional input parameters are needed, go to Appendix D, Keypad, and scan the

appropriate characters from the keypad.

Additional information about many features can be found in the “Refer-

ences” chapter.

If you make a mistake before the last character, scan the CANCEL bar code

bort and not save the entry string. You can then start again at the

beginning.

Complete the programming sequence by scanning the ENTER/EXIT PROGRAMMING bar

code to exit Programming Mode.

Enter/Exit Programming Mode 2D Global Features

204

Gryphon™ I GD44XX

GBT4400/GM440X

2D Maximum Decoding Time

This feature specifies the maximum amount of time the software will spend attempting to

decode a 2D label. The selectable range is 10 milliseconds to 2.55 milliseconds.

$CDETM0A(CR)

2D Maximum Decoding Time = 100 msec

$CDETM32(CR)

2D Maximum Decoding Time = 200 msec

$CDETM23(CR)

2D Maximum Decoding Time = 350 msec

DEFAULT

$CDETM80(CR)

2D Maximum Decoding Time = 500 msec

$CDETM16(CR)

2D Maximum Decoding Time = 1 Second

$CDETMC8(CR)

2D Maximum Decoding Time = 2 Seconds

$CDETMFF(CR)

2D Maximum Decoding Time = 2.55 Seconds

2D Global Features Enter/Exit Programming Mode

Product Reference Guide

205

2D Structured Append

Enables/disables ability of reader to append multiple 2D Codes labels in a structured format.

The structured append property is globally applied to the following symbologies, if these are

enabled:

• Data Matrix •Aztec

•QR Code • PDF 417

DEFAULT

$CDESA00(CR)

Structured Append = Disable

$CDESA01(CR)

Structured Append = Enable

2D Normal/Inverse Symbol Control

Specifies the options available for decoding normal/negative printed 2D symbols. This

configuration item applies globally to all the 2D symbologies that support that feature

according to Standard AIM Specification: Data Matrix, QR, MicroQR, Aztec and Chinese

Sensible Code.

To decode all symbologies, including linear symb

ologies, refer to "Decode Negative Image" on

page 106

DEFAULT

$CIPNR00(CR)

Normal/Inverse Symbol Control = Normal

$CIPNR01(CR)

Normal/Inverse Symbol Control = Inverse

$CIPNR02(CR)

Normal/Inverse Symbol Control =

Both Normal and Inverse

D Symbology Selection

Enter/Exit Programming Mode Aztec Code

206

Gryphon™ I GD44XX

GBT4400/GM440X

Aztec Code

Aztec Code Enable / Disable

Enables/disables the ability of the reader to decode Aztec Code labels.

DEFAULT

$CAZEN00(CR)

Aztec Code = Disable

$CAZEN01(CR)

Aztec Code = Enable

Aztec Code Length Control

This feature specifies either variable length decoding or fixed length decoding for this

symbology.

Variable Length:

For variable length decoding, a minimum and maximum length may be set.

Fixed Length:

For fixed length decoding, two different lengths may be set.

DEFAULT

$CAZLC00(CR)

Aztec Code Length Control = Variable Length

$CAZLC01(CR)

Aztec Code Length Control = Fixed Length

Aztec Code Enter/Exit Programming Mode

Product Reference Guide

207

Aztec Code Set Length 1

Specifies one of the bar code lengths for Aztec Code Length Control. Length 1 is the minimum

label length if in Va

riable Length Mode, or the first fixed length if in Fixed Length Mode.

Characters can be set from 0001 to 3,832 characters in increments of 0001 (pad with zeroes).

See page 267 for detailed instructions on setting this feature.

$CAZL1

Select Aztec Code Length 1 Setting

To configure this feature, scan

the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the bar code

left followed by the digits from the Alphanumeric

characters in

Appendix D, Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

bar co

de again.

Make a mistake? Scan the CANCEL bar code to abort

and not sa

ve the entry string. You can then start again at

the beginning.

CANCEL

DEFAULT

0001 = Length 1 is 1 Character

Enter/Exit Programming Mode Aztec Code

208

Gryphon™ I GD44XX

GBT4400/GM440X

Aztec Code Set Length 2

This feature specifies one of the bar code lengths for Aztec Code Length Control. Length 2 is

the maximum label length if in Variable Length Mode, or

the second fixed length if in Fixed

Length Mode. Characters can be set from 0001 to 3,832 characters in increments of 0001 (pad

with zeroes).

See page 267 for detailed instructions on setting this feature.

$CAZL2

Select Aztec Code Length 2 Setting

To configure this feature, sc

an the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the bar code

left followed by the digits from the Alphanumeric

characters in

Appendix D, Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

bar c

ode again.

Make a mistake? Scan the CANCEL bar code to abort

and not sa

ve the entry string. You can then start again at

the beginning.

CANCEL

DEFAULT

Length 2 is 3,832 Characters

China Sensible Code Enter/Exit Programming Mode

Product Reference Guide

209

China Sensible Code

China Sensible Code Enable / Disable

Enables/disables the ability of the reader to decode China Sensible Code labels.

DEFAULT

$CCSEN00(CR)

China Sensible Code = Disable

$CCSEN01(CR)

China Sensible Code = Enable

China Sensible Code Length Control

This feature specifies either variable length decoding or fixed length decoding for this

symbology.

Variable Length:

For variable length decoding, a minimum and maximum length may be set.

Fixed Length:

For fixed length decoding, two different lengths may be set.

DEFAULT

$CCSLC00(CR)

China Sensible Code Length Control = Variable Length

$CCSLC01(CR)

China Sensible Code Length Control = Fixed Length

Data Matrix Enter/Exit Programming Mode

Product Reference Guide

213

Data Matrix Length Control

This feature specifies either variable length decoding or fixed length decoding for this

symbology.

Variable Length:

For variable length decoding, a minimum and maximum length may be set.

Fixed Length:

For fixed length decoding, two different lengths may be set.

DEFAULT

$CDMLC00(CR)

Data Matrix Length Control = Variable Length

$CDMLC01(CR)

Data Matrix Length Control = Fixed Length

Data Matrix

Set Length 1

Specifies one of the bar code lengths for Data Matrix Length Control. Length 1 is the minimum

label length if in Va

riable Length Mode, or the first fixed length if in Fixed Length Mode.

Characters can be set from 0001 to 3,116 characters in increments of 0001 (pad with zeroes).

See page 267 for detailed instructions on setting this feature.

$CDML1

Select Data Matrix Length 1 Setting

To configure this feature, scan the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the bar code

left followed by the digits from the Alphanumeric

characters in

Appendix D, Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

bar co

de again.

Make a mistake? Scan the CANCEL bar code to abort

and not sa

ve the entry string. You can then start again at

the beginning.

CANCEL

DEFAULT

0001 = Length 1 is 1 Character

Enter/Exit Programming Mode Data Matrix

214

Gryphon™ I GD44XX

GBT4400/GM440X

Data Matrix Set Length 2

This feature specifies one of the bar code lengths for Data Matrix Length Control. Length 2 is

the maximum label length if in Variable Length Mode, or

the second fixed length if in Fixed

Length Mode. Characters can be set from 0001 to 3,116 characters in increments of 0001 (pad

with zeroes).

See page 267 for detailed instructions on setting this feature.

$CDML2

Select Data Matrix Length 2 Setting

To configure this feature, sc

an the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the bar code

left followed by the digits from the Alphanumeric

characters in

Appendix D, Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

bar c

ode again.

Make a mistake? Scan the CANCEL bar code to abort

and not sa

ve the entry string. You can then start again at

the beginning.

CANCEL

DEFAULT

Length 2 is 3,116 Characters

Maxicode Enter/Exit Programming Mode

Product Reference Guide

215

Maxicode

Maxicode Enable / Disable

Enables/disables ability of reader to decode Maxicode labels.

DEFAULT

$CMXEN00(CR)

Maxicode = Disable

$CMXEN01(CR)

Maxicode = Enable

Maxicode Primary Message Transmission

Enables/disables the transmission of only the Primary Message when the Secondary

Message is not readable.

DEFAULT

$CMXPT00(CR)

Maxicode Primary Message Transmission = Disable

$CMXPT01(CR)

Maxicode Primary Message Transmission = Enable

Maxicode Enter/Exit Programming Mode

Product Reference Guide

217

Maxicode Set Length 2

This feature specifies one of the bar code lengths for Maxicode Length Control. Length 2 is the

maximum label length if in Variable Length Mode, or the second

fixed length if in Fixed Length

Mode. Characters can be set from 0001 to 0145 characters in increments of 0001 (pad with

zeroes).

See page 267 for detailed instructions on setting this feature.

$CMXL2

Select Maxicode Length 2 Setting

To configure this feature, scan

the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the bar code

left followed by the digits from the Alphanumeric

characters in

Appendix D, Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

bar co

de again.

Make a mistake? Scan the CANCEL bar code to abort

and not sa

ve the entry string. You can then start again at

the beginning.

CANCEL

DEFAULT

Length 2 is 0145 Characters

Enter/Exit Programming Mode PDF417

218

Gryphon™ I GD44XX

GBT4400/GM440X

PDF417

PDF417 Enable / Disable

Enables/disables the ability of the reader to decode PDF417 labels.

$CP4EN00(CR)

PDF417 = Disable

$CP4EN01(CR)

PDF417 = Enable

DEFAULT

PDF417 Length Control

This feature specifies either variable length decoding or fixed length decoding for this

symbology.

Variable Length:

For variable length decoding, a minimum and maximum length may be set.

Fixed Length:

For fixed length decoding, two different lengths may be set.

DEFAULT

$CP4LC00(CR)

PDF417 Length Control = Variable Length

$CP4LC01(CR)

PDF417 Length Control = Fixed Length

PDF417 Enter/Exit Programming Mode

Product Reference Guide

219

PDF417 Set Length 1

Specifies one of the bar code lengths for PDF417 Length Control. Length 1 is the minimum

label length if in Va

riable Length Mode, or the first fixed length if in Fixed Length Mode.

Length includes the bar code’s data characters only. Characters can be set from 0001 to 2,710

characters (pad with zeroes) in increments of 01. Any value greater than 2,710 will be

considered to be 2,710.

See page 267 for detailed instructions on setting this feature.

$CP4L1

Select PDF417 Length 1 Setting

To configure this feature, scan

the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the bar code

left followed by the digits from the Alphanumeric

characters in

Appendix D, Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

bar co

de again.

Make a mistake? Scan the CANCEL bar code to abort

and not sa

ve the entry string. You can then start again at

the beginning.

CANCEL

DEFAULT

0001 = Length 1 is 1 Character

Enter/Exit Programming Mode PDF417

220

Gryphon™ I GD44XX

GBT4400/GM440X

PDF417 Set Length 2

This feature specifies one of the bar code lengths for PDF417 Length Control. Length 2 is the

maximum label length if in Variable Le

ngth Mode, or the second fixed length if in Fixed Length

Mode. Length includes the bar code’s check, data, and full-ASCII shift characters. The length

does not include start/stop characters. Characters can be set from 01 to 2,710 characters (pad

with zeroes) in increments of 01. Any value greater than 2,710 will be considered to be 2,710.

See page 267 for detailed instructions on setting this feature.

$CP4L2

Select PDF417 Length 2 Setting

To configure this feature, sc

an the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the bar code

left followed by the digits from the Alphanumeric

characters in

Appendix D, Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

bar c

ode again.

Make a mistake? Scan the CANCEL bar code to abort

and not sa

ve the entry string. You can then start again at

the beginning.

CANCEL

DEFAULT

Length 2 is 2,710 Characters

Micro PDF417 Enter/Exit Programming Mode

Product Reference Guide

221

Micro PDF417

Micro PDF417 Enable / Disable

Enables/disables the ability of the reader to decode Micro PDF417 labels

DEFAULT

$CMIEN00(CR)

Micro PDF417 = Disable

$CMIEN01(CR)

Micro PDF417 = Enable

Micro PDF417 Code 128 GS1-128 Emulation

Specifies which AIM ID to use for MicroPDF labels when doing Code 128 or GS1-128

emulation.

Emulation choices are:

• Micro PDF AIM ID and label type

• Code 128 / EAN128 AIM Id and label type

DEFAULT

$CMIU800(CR)

Micro PDF417 Code 128 GS1-128 Emulation =

Micro PDF AIM ID and label type

$CMIU801(CR)

Micro PDF417 Code 128 GS1-128 Emulation =

Code 128 / EAN128 AIM ID and label type

Enter/Exit Programming Mode Micro PDF417

222

Gryphon™ I GD44XX

GBT4400/GM440X

Micro PDF417 Length Control

This feature specifies either variable length decoding or fixed length decoding for this

symbology.

Variable Length:

For variable length decoding, a minimum and maximum length may be set.

Fixed Length:

For fixed length decoding, two different lengths may be set.

DEFAULT

$CMILC00(CR)

Micro PDF417 Length Control = Variable Length

$CMILC01(CR)

Micro PDF417 Length Control = Fixed Length

Micro PDF417 Set Length 1

Specifies one of the bar code lengths for Micro PDF417 Length Control. Length 1 is the

minimum label length if in Va

riable Length Mode, or the first fixed length if in Fixed Length

Mode. Length includes the bar code’s data characters only. Characters can be set from 0001 to

0366 characters (pad with zeroes) in increments of 01. Any value greater than 0366 will be

considered to be 0366.

See page 267 for detailed instructions on setting this feature.

$CMIL1

Select Micro PDF417 Length 1 Setting

To configure this feature, scan the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the bar code

left followed by the digits from the Alphanumeric

characters in

Appendix D, Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

bar c

ode again.

Make a mistake? Scan the CANCEL bar code to abort

and not sa

ve the entry string. You can then start again at

the beginning.

CANCEL

DEFAULT

0001 = Length 1 is 1 Character

Micro PDF417 Enter/Exit Programming Mode

Product Reference Guide

223

Micro PDF417 Set Length 2

This feature specifies one of the bar code lengths for Micro PDF417 Length Control. Length 2

is the maximum label length if in Variable Length Mode, or the second fixed

length if in Fixed

Length includes the bar code’s data characters only. Characters can be set from 0001 to 0366

characters (pad with zeroes) in increments of 01. Any value greater than 0366 will be considered

to be 0366.

See page 267 for detailed instructions on setting this feature.

$CMIL2

Select Micro PDF417 Length 2 Setting

To configure this feature, scan

the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the bar code

left followed by the digits from the Alphanumeric

characters in

Appendix D, Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

bar co

de again.

Make a mistake? Scan the CANCEL bar code to abort

and not sa

ve the entry string. You can then start again at

the beginning.

CANCEL

DEFAULT

Length 2 is 0366 Characters

Enter/Exit Programming Mode QR Code

224

Gryphon™ I GD44XX

GBT4400/GM440X

QR Code

QR Code Enable / Disable

Enables/disables the ability of the reader to decode QR Code labels

$CQREN00(CR)

QR Code = Disable

$CQREN01(CR)

QR Code = Enable

DEFAULT

QR Code Length Control

This feature specifies either variable length decoding or fixed length decoding for this

symbology.

Variable Length:

For variable length decoding, a minimum and maximum length may be set.

Fixed Length:

For fixed length decoding, two different lengths may be set.

DEFAULT

$CQRLC00(CR)

QR Code Length Control = Variable Length

$CQRLC01(CR)

QR Code Length Control = Fixed Length

QR Code Enter/Exit Programming Mode

Product Reference Guide

225

QR Code

Set Length 1

Specifies one of the bar code lengths for QR Code Length Control. Length 1 is the minimum

label length if in Va

riable Length Mode, or the first fixed length if in Fixed Length Mode.

Characters can be set from 0001 to 7,089 characters in increments of 0001 (pad with zeroes).

See page 267 for detailed instructions on setting this feature.

$CQRL1

Select QR Code Length 1 Setting

To configure this feature, scan

the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the bar code

left followed by the digits from the Alphanumeric

characters in

Appendix D, Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

bar co

de again.

Make a mistake? Scan the CANCEL bar code to abort

and not sa

ve the entry string. You can then start again at

the beginning.

CANCEL

DEFAULT

0001 = Length 1 is 1 Character

Enter/Exit Programming Mode QR Code

226

Gryphon™ I GD44XX

GBT4400/GM440X

QR Code

Set Length 2

This feature specifies one of the bar code lengths for QR Code Length Control. Length 2 is the

maximum label length if in Variable Le

ngth Mode, or the second fixed length if in Fixed Length

Mode. Characters can be set from 0001 to 7,089 characters in increments of 0001 (pad with

zeroes).

See page 267 for detailed instructions on setting this feature.

$CQRL2

Select QR Code Length 2 Setting

To configure this feature, sc

an the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the bar code

left followed by the digits from the Alphanumeric

characters in

Appendix D, Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

bar c

ode again.

Make a mistake? Scan the CANCEL bar code to abort

and not sa

ve the entry string. You can then start again at

the beginning.

CANCEL

DEFAULT

Length 2 is 7,089 Characters

Micro QR Code Enter/Exit Programming Mode

Product Reference Guide

227

Micro QR Code

Micro QR Code Enable/Disable

Enables/disables the ability of the reader to decode Micro QR Code labels

DEFAULT

MQEN00

Micro QR Code = Disable

MQEN01

Micro QR Code = Enable

Micro QR Code Length Control

This feature specifies either variable length decoding or fixed length decoding for this

symbology.

Variable Length:

For variable length decoding, a minimum and maximum length may be set.

Fixed Length:

For fixed length decoding, two different lengths may be set.

DEFAULT

$CMQLC00(CR)

Micro QR Code Length Control = Variable Length

$CMQLC01(CR)

Micro QR Code Length Control = Fixed Length

Enter/Exit Programming Mode Micro QR Code

228

Gryphon™ I GD44XX

GBT4400/GM440X

Micro QR Code

Set Length 1

Specifies one of the bar code lengths for Micro QR Code Length Control. Length 1 is the

minimum label length if in Variable Length Mode, or the first fixed length if in Fixed Length

Mode. Characters can be set from 0001 to 0035 characters in increments of 0001 (pad with

zeroes).

See page 267 for detailed instructions on setting this feature.

$CMQL1

Select Micro QR Code Length 1 Setting

To configure this feature, sc

an the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the bar code

left followed by the digits from the Alphanumeric

characters in

Appendix D, Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

bar c

ode again.

Make a mistake? Scan the CANCEL bar code to abort

and not sa

ve the entry string. You can then start again at

the beginning.

CANCEL

DEFAULT

0001 = Length 1 is 1 Character

Micro QR Code Enter/Exit Programming Mode

Product Reference Guide

229

Micro QR Code

Set Length 2

This feature specifies one of the bar code lengths for Micro QR Code Length Control. Length 2

is the maximum label length if in Variable Length Mode, or the second fixed length if in Fixed

Length Mode. Characters can be set from 0001 to 0035 characters in increments of 0001 (pad

with zeroes).

See page 267 for detailed instructions on setting this feature.

$CMQL2

Select QR Code Length 2 Setting

To configure this feature, scan

the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the bar code

left followed by the digits from the Alphanumeric

characters in

Appendix D, Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

bar co

de again.

Make a mistake? Scan the CANCEL bar code to abort

and not sa

ve the entry string. You can then start again at

the beginning.

CANCEL

DEFAULT

Length 2 is 0035 Characters

Enter/Exit Programming Mode UCC Composite

230

Gryphon™ I GD44XX

GBT4400/GM440X

UCC Composite

UCC Composite Enable / Disable

Enables/disables the ability of the reader to decode the stacked part of a UCC Composite label.

DEFAULT

$CCMEN00(CR)

UCC Composite = Disable

$CCMEN01(CR)

UCC Composite = Enable

This feature is not effective when Global AIM IDs are enabled (see "

Global

AIM ID" on page 77

Product Reference Guide

235

WIRELESS FEATURES

This section provides options and programming related to the reader’s wireless communication

features. Reference Appendix B. for a listing of standard factory settings.

WIRELESS BEEPER FEATURES starting on page 236

•Good Transmission Beep

•Beep Frequency

•Beep Duration

•Beep Volume

•Disconnect Beep

•Docking Beep

•Leash Alarm

CONFIGURATION UPDATES starting on page 241

•Automatic Configuration Update

•Copy Configuration to Scanner

•Copy Configuration to Base Station

BATCH FEATURES starting on page 242

•Batch Mode

•Send Batch

•Erase Batch Memory

•RF Batch Mode Transmit Delay

DIRECT RADIO AUTOLINK starting on page 244

BLUETOOTH-ONLY FEATURES starting on page 245

•Source Radio Address Transmission

•Source Radio Address Delimiter Character

•Link Timeout

•BT Security Mode

•BT PIN Code

•Select PIN Code Length

•Set PIN Code

•BT Poll Rate

•Power Off

•Powerdown Timeout

starting on page 251

•STAR Radio Protocol Timeout

•STAR Radio Transmit Mode

FEATURES FOR STAR MODELS ONLY

Enter/Exit Programming Mode Wireless Beeper Features

236

Gryphon™ I GD44XX

GBT4400/GM440X

Wireless Beeper Features

Several options are available to configure beeper behavior for RF operation.

Good Transmission Beep

Enables/disables the Good Transmission Beep indication. When enabled, a beep occurs when a

Label is correctly transmitted to the base.

$CBTAB00(CR)

Good Transmission Beep = Disable

$CBTAB01(CR)

Good Transmission Beep = Enable

DEFAULT

Beep Frequency

Adjusts radio-specific beep indications to sound at a low, medium or high frequency, selectable

from the list below (controls the beeper’s pitch/tone).

DEFAULT

$CBTBF00(CR)

Beep Frequency = Low

$CBTBF01(CR)

Beep Frequency = Medium

$CBTBF02(CR)

Beep Frequency = High

Wireless Beeper Features Enter/Exit Programming Mode

Product Reference Guide

237

Beep Duration

This feature controls the duration of radio-specific beep indications.

$CBTBD06(CR)

Beep Duration = 60 msec

$CBTBD08(CR)

Beep Duration = 80 msec

DEFAULT

$CBTBD0A(CR)

Beep Duration = 100 msec

$CBTBD0C(CR)

Beep Duration = 120 msec

$CBTBD0E(CR)

Beep Duration = 140 msec

$CBTBD10(CR)

Beep Duration = 160 msec

$CBTBD12(CR)

Beep Duration = 180 msec

$CBTBD14(CR)

Beep Duration = 200 msec

Enter/Exit Programming Mode Wireless Beeper Features

238

Gryphon™ I GD44XX

GBT4400/GM440X

Beep Volume

Selects the beeper volume (loudness) of radio-specific beep indications. There are three

selectable volume levels.

$CBTBV00(CR)

Beep Volume = Low

$CBTBV01(CR)

Beep Volume = Medium

$CBTBV02(CR)

Beep Volume = High

DEFAULT

Disconnect Beep

Enables/disables the beep indication that a handheld has become connected or disconnected

from a Base Station.

$CBTDB00(CR)

Disconnect Beep = Disable

$CBTDB01(CR)

Disconnect Beep = Enable

DEFAULT

The defaults are different for the STAR and BT models.

Wireless Beeper Features Enter/Exit Programming Mode

Product Reference Guide

239

Docking Beep

Enables/disables a beep indication when the handheld is placed in the Base Station.

$CBTCB00(CR)

Docking Beep = Disable

$CBTCB01(CR)

Docking Beep = Enable

DEFAULT

Leash Alarm

This setting specifies the number of seconds to sound the Leash Mode beeps (three per second)

when the handheld goes out of range. This is especially useful in instances where the reader

might inadvertently have been placed in a bag or cart.

For this mode to be effective, the reader must be linked to the Base Station. If the reader is

asleep or

disconnected from the Base Station, there is no way for it to know where it is relative

to the Base Station because communication is not active between the devices.

DEFAULT

$CBTLB00(CR)

Leash Alarm = Disabled

$CBTLB01(CR)

Leash Alarm = 1 Second

$CBTLB02(CR)

Leash Alarm = 2 Seconds

Enter/Exit Programming Mode Wireless Beeper Features

240

Gryphon™ I GD44XX

GBT4400/GM440X

Leash Alarm — cont.

$CBTLB03(CR)

Leash Alarm = 3 Seconds

$CBTLB04(CR)

Leash Alarm = 4 Seconds

$CBTLB05(CR)

Leash Alarm = 5 Seconds

$CBTLB0A(CR)

Leash Alarm = 10 Seconds

$CBTLB19(CR)

Leash Alarm = 25 Seconds

$CBTLB1E(CR)

Leash Alarm = 30 Seconds

Configuration Updates Enter/Exit Programming Mode

Product Reference Guide

241

Configuration Updates

See page 286 in “References” for detailed information and examples of these features.

Automatic Configuration Update

When this feature is enabled, a reader and its linked Base Station can automatically ensure they

stay in sync with regard to application hardware and/or configuration. See page 286 for more in-

formation on this feature.

$CBTCU00(CR)

Automatic Configuration Update = Disable

$CBTCU01(CR)

Automatic Configuration Update = Enable

DEFAULT

Copy Configuration to Scanner

Scan the following label to copy the current Base Station configuration to the scanner. Use this

method when the Auto Configuration Update feature is disabled and you want a one-time con-

figuration update to be performed on the scanner.

py g

Copy Configuration to Scanner

Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunction

with this bar code.

Copy Configuration to Base Station

Scan the following label to copy the current scanner configuration to the Base Station. Use this

method when the Auto Configuration Update feature is disabled and you want a one-time

configuration update to be performed on the Base Station.

Copy Configuration to Base Station

Cpycfg2Ba

Do not scan an ENTER/EXIT PROGRAMMING MODE label with this bar code.

Enter/Exit Programming Mode Batch Features

242

Gryphon™ I GD44XX

GBT4400/GM440X

Batch Features

Batch Mode

This option specifies whether to store labels in the handheld while disconnected from the base.

Options are as follows:

• Disabled — The handheld will not store/batch labels.

• Automatic — The handheld will store labels to RAM when the handheld goes out of

range and is disconnected from the r

emote device.

• Manual — The handheld will always store labels to F

ash memory. The user must manu-

ally send the stored labels to the remote device using a special

"batch send" label.

DEFAULT

$CBTBM00(CR)

Batch Mode = Disabled

$CBTBM01(CR)

Batch Mode = Automatic

$CBTBM02(CR)

Batch Mode = Manual

Send Batch

When the scanner is configured in Manual Batch Mode, use the following bar code to initiate

sending of labels stored in batch memory.

BatchSend

Send Batch

Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunction

with this bar code.

Batch Features Enter/Exit Programming Mode

Product Reference Guide

243

Erase Batch Memory

When the scanner is configured in Manual Batch Mode, use the following bar code to erase any

labels stored in batch memory.

Erase Batch Memory

Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunction

with this bar code.

RF Batch Mode Transmit Delay

Specifies the delay in 10 msec increments between transmitting labels stored in batch memory.

DEFAULT

$CBTTD00(CR)

RF Batch Mode Transmit Delay = No Delay

$CBTTD05(CR)

RF Batch Mode Transmit Delay = 50 mS

$CBTTD0A(CR)

RF Batch Mode Transmit Delay = 100 mS

$CBTTD32(CR)

RF Batch Mode Transmit Delay = 0.5 seconds

$CBTTD64(CR)

RF Batch Mode Transmit Delay = 1 second

$CBTTDFA(CR)

Enter/Exit Programming Mode Direct Radio Autolink

244

Gryphon™ I GD44XX

GBT4400/GM440X

Direct Radio Autolink

This feature enables/disables the ability to link a wireless handheld to a base station without

scanning the Unlink label first.

DEFAULT

$CBTDL00(CR)

Direct Radio Link = Unlink Label Required

$CBTDL01(CR)

Direct Radio Link = Automatic Unlinking

RF Batch Mode Transmit Delay = 2.5 seconds

RF Address Stamping Enter/Exit Programming Mode

Product Reference Guide

245

BLUETOOTH-ONLY FEATURES

The features in this section are valid only for Gryphon Bluetooth models. Also reference the

Setup section for instructions on Linking a BT Reader to a PC, starting on page 26.

RF Address Stamping

These features allow configuration of source radio data inclusion.

Source Radio Address Transmission

Enables/disables the ability of source radio address information to be transmitted to the host

and, if so, at what position with respect to the label data. See page 286 in “References” for

detailed information and examples for setting this feature.

DEFAULT

$CBTAS00(CR)

Source Radio Address Transmission = Do Not Include

$CBTAS01(CR)

Source Radio Address Transmission = Prefix

When included as a prefix, the source-radio ID is displayed after all label

formatting has been applied. The 6 byte hex address is sent as 12 ascii char-

acters, i.e., an address of 00 06 66 00 1A ED will be sent as (shown in hex):

30 30 30

36 36 36 30 30 31 41 45 44

Enter/Exit Programming Mode RF Address Stamping

246

Gryphon™ I GD44XX

GBT4400/GM440X

Source Radio Address Delimiter Character

This option specifies the delimiter character to be placed between the label data and radio

address when address stamping is enabled.

$CBTAD

Set Source Radio Address Delimiter Character

To configure this feature, scan the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the bar code

left followed by the digits from the Alphanumeric

characters in

Appendix D. Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

bar c

ode again.

Make a mistake? Scan the CANCEL bar code to

abort and not save the entry string. You can then

start again at the beginning.

CANCEL

DEFAULT

00 = No Delimiter Character

This feature only applies if "Source Radio Address Transmission" on

page 245 is enabled.

Link Timeout

This feature specifies the wait time in one-second ticks for response from the remote. The

selectable timeout range is 01 to 40 (01-0x28) seconds in one second increments.

See page 260 for more information on sett

ing th

is feature.

$CBTLT

Set Link Timeout

To configure this feature, scan the ENTER/EXIT

PROGRAMMING MODE bar code above, then the

bar code at left followed by the digits from the

Alphanumeric characters in Appendix D. Keypad

representing your desired character(s). End by

scanning the ENTER/EXIT

bar code again.

Make a mistake? Scan the CA

NCEL bar code to

abort and not save the entry string. You can then

start again at the beginning.

CANCEL

DEFAULT

02 Link Timeout value is 2 seconds

BT Security Features Enter/Exit Programming Mode

Product Reference Guide

247

BT Security Features

On the BT system, it is possible to set a (configurable) PIN code to authenticate/connect BT

devices, and encrypt the data.

The BT PIN code can be enabled and configured by reading the bar codes in the following

sections.

If you are using a BT scanner directly connected to a host through a BT dongle,

verify that the scanner and the BT driver used by the dongle share the same PIN

code and the same security level. Otherwise the connection cannot be established.

Follow these steps to set the PIN code for a scanner:

1. Enable BT Security Mode by scanning the “Enable” bar code below.

2. Select a PIN code length of either 4 or 16 characters by

scanning the appropriate bar code

in "Select PIN Code Length" on page 248.

3. Scan the relevant bar code from "Set PIN Code" on page 248, then scan the desired alpha-

numeric characters from the keypad in Appendix D. Keypad to set the PIN code.

See page 288 in “Refer

ences” for more detailed information and examples for this feature.

BT Security Mode

This feature enables/disables authentication and encryption of the BT link. Use the feature "BT

PIN Code" on page 248 to specify the length and digits in the PIN code used to authenticate

the BT Link.

DEFAULT

$CBTSE00(CR)

BT Security Mode = Disable

$CBTSE01(CR)

BT Security Mode = Enable

Changing the security mode setting will unlink the de

vices. If the Automatic Configu-

ration Update is set to the default “Enabled” setting,

the devices must only be

relinked. If the Automatic Configuration Update is set to “Disabled,” the Security

Mode setting must also be updated in the Base Station using Aladdin. After the Base

Station has been updated, the devices must be relinked.

Enter/Exit Programming Mode BT Security Features

248

Gryphon™ I GD44XX

GBT4400/GM440X

BT PIN Code

After enabling Security Mode (see "BT Security Mode" on page 247), specify whether you want

to set a 4-digit or a 16-digit PIN Code. See page 28

8 for detailed information and examples for

setting this feature.

$CBTPS00\r

Select 4-character BT PIN Code

DEFAULT

~$CBTPS01\r

Select 16-character BT PIN Code

Select PIN Code Length

Set PIN Code

Determine the desired characters for the PIN code, then convert to hexadecimal using the

ASCII Chart on the inside back cover of this manual. Se

e page 288 for detailed information and

examples for setting this feature.

$CBTPC

Set 4-character BT PIN Code

To configure this feature, sc

an the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the bar code

left followed by the digits from the Alphanumeric

characters in

Appendix D. Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

bar c

ode again.

$CBTP6

Set 16-character BT PIN Code

CANCEL

Make a mistake? Scan the CANCEL bar code to

abort

and not save the entry string. You can then

start again at the beginning.

DEFAULT

31323334 = Default PIN Code is 1234

Other BT Features Enter/Exit Programming Mode

Product Reference Guide

249

Other BT Features

BT Poll Rate

This feature specifies the time between BT polls.

$CBTST00(CR)

BT Poll Rate = Maximum BT Poll Rate

$CBTST01(CR)

BT Poll Rate = 10 ms

$CBTST02(CR)

BT Poll Rate = 20 ms

DEFAULT

$CBTST05(CR)

BT Poll Rate = 50 ms

$CBTST0A(CR)

BT Poll Rate = 100 ms

$CBTST14(CR)

BT Poll Rate = 200 ms

Enter/Exit Programming Mode Other BT Features

250

Gryphon™ I GD44XX

GBT4400/GM440X

Power Off

See “Power Off” on page 26 for information about this BT feature.

Powerdown Timeout

The Powerdown Timeout feature sets the time for automatically switching the unit off when

the imager has been idle.

$CSLPS00(CR)

Powerdown Timeout = Disable

$CSLPS01(CR)

Powerdown Timeout = 10 minutes

$CSLPS02(CR)

Powerdown Timeout = 20 minutes

R)$CSLPS03(CR

)

Powerdown Timeout = 30 minutes

DEFAULT

$CSLPS06(CR)

Powerdown Timeout = 60 Minutes (1 Hour)

$CSLPS0C(CR)

Powerdown Timeout = 120 Minutes (2 Hours)

Other BT Features

Product Reference Guide

251

FEATURES FOR STAR MODELS ONLY

The features in this section are valid only for the Gryphon I GM440X Star model:

• STAR Radio Protocol Timeout

• STAR Radio Transmit Mode

STAR Radio Protocol Timeout

This parameter sets the valid wait time before transmission between the handheld reader and

Base Station is considered failed.

When setting this parameter, take into consideration the radio traffic (numbe

r of readers in the

same area). The selectable range for this feature is from 02 to 25 seconds. See page 287 in

“References” for detailed information and examples for setting this feature.

Set Radio Protocol Timeout

Make a mistake? Scan the CANCEL barcode to abort and not

sav

e the entry string. You can then start again at the begin-

ning.

CANCEL

DEFAULT

02 = 2 Seconds Radio Protocol Timeout

252

Gryphon™ I GD44XX

GBT4400/GM440X

STAR Radio Transmit Mode

Specifies the transmission protocol for Star communications.

Options are:

• ACK from cradle to scanner — signals a good transmission as soon as the

Base Station

receives a label

• ACK when sent to host — scanner signals a good transmission as soon as the Base Station

has sent the label to the host

• ACK from host — scanner signals a good transmis

sion as soon as the B

ase Station has sent

the label to the host and host has replied with an acknowledge message.

DEFAULT

ACK from cradle

ACK when sent to host

ACK from host

The Base Station can receive a host message only if Host Commands

Obey/Ignore (page 39) is set to Ignore.

ACK from host works only for RS-232 or USB-COM interfaces with ACK/

NACK disabl

ed. If ACK from host is configured with any other interface

conditions, it works like ACK when sent to host.

See "Message Formatting" on page 291 for details.

Product Reference Guide

253

MOTION FEATURES

MOTION AIMING CONTROL on page 253

MOTION SENSITIVITY on page 254

MOTIONLESS TIMEOUT on page 254

Use this chapter to configure motion settings for the handheld.

Reference Appendix B for a listing of standard factory settings.

Motion Aiming Control

Configures the ability of the scanner to Enable/Disable the Aiming system when motion is

detected.

$CMOMD00(CR)

Motion Aiming Control = Disable

$CMOMD01(CR)

Motion Aiming Control = Enable

DEFAULT

Enter/Exit Programming Mode Motion Features

254

Gryphon™ I GD44XX

GBT4400/GM440X

Motion Sensitivity

Defines discrete set of levels for scanner motion sensitivity when in handheld use.

$CMOSY00(CR)

Motion Sensitivity = Low

$CMOSY01(CR)

Motion Sensitivity = Medium

DEFAULT

$CMOSY02(CR)

Motion Sensitivity = High

Motionless Timeout

Specifies the waiting time in 100 millisecond ticks to assume that the reader is in a motionless

condition. The selectable range is 500 msec to 25.5 Seconds. When no motion event is detected

for a period of time longer than this timeout, the software assumes the reader is in a motionless

condition. This normally results in returning the scanner to Stand Mode. This option relates to

such features as Aimer On and Stand Mode Object Sense scanning with respect to motion. See

"Motionless Timeout" on page 289 in References.

$CMOTO

Select Motionless Timeout Setting

To configure this feature, scan the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the bar code

left followed by three digits from the Alphanumeric

characters in

Appendix D Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

bar c

ode again.

Make a mistake? Scan the CANCEL bar code to abort

and not sa

ve the entry string. You can then start again at

the beginning.

CANCEL

DEFAULT

020 = Motionless Timeout = 2 seconds

Product Reference Guide

255

Chapter 4

References

This section contains explanations and examples of selected bar code features. See

"Configuration Using Bar Codes" starting on page 37 for the actual bar code labels used to

configure the reader.

RS-232 PARAMETERS starting on page 256

SYMBOLOGIES starting on page 267

Set Length

•RS-232

•RS-232/USB COM Parameters

KEYBOARD INTERFACE starting on page 264

•Wedge Quiet Interval

•Intercharacter Delay

•Intercode Delay

DATA EDITING starting on page 268

•Global Prefix/Suffix

•Global AIM ID

•Label ID

•Character Conversion

READING PARAMETERS starting on page 277

•Good Read LED Duration

SCANNING FEATURES starting on page 278

•Scan Mode

•Stand Mode Off Time

•Scanning Active Time

•Aiming Duration Time

•Flash On Time

•Flash Off Time

•Multiple Labels Ordering by Code Symbology

RF FEATURES starting on page 286

•Automatic Configuration Update

•RF Address Stamping

•BT-Only Features

MOTION FEATURES starting on page 289

•Motionless Timeout

References

256

Gryphon™ I GD44XX

GBT4400/GM440X

RS-232 Parameters

RS-232

Baud Rate

Baud rate is the number of bits of data transmitted per second. Set the reader's baud rate to

match the baud rate setting of the host device. With an improper baud rate setting, data may

not reach the host correctly.

Stop Bits

The stop bit(s) at the end of each transmitted character marks the end of transmission of one

character and prepares the receiving device for the next character in the serial data stream. The

number of stop bits selected (one or two) depends on the number the receiving terminal is

programmed to accommodate. Set the number of stop bits to match host device requirements.

Parity

This feature specifies parity required for sending and receiving data. A parity check bit is the

most significant bit of each ASCII coded character. Select the parity type according to host

device requirements.

• Select None when no parity bit is required.

• Select Odd parity and the parity bit value is set to 0 or 1, based on data, to ensure that an

odd number of 1 bi

ts are contained in the coded character.

• Select Even parity and the parity bit value is set to 0 or 1, based on data, to ensure that an

ven number of 1 bits are contained in the coded character.

Handshaking Control

The data interface consists of an RS-232 port designed to operate either with or without the

hardware handshaking lines, Request to Send (RTS), and Clear to Send (CTS). Handshaking

Control includes the following options:

• RTS — RTS is asserted during transmissions. CTS is ignored.

• RTS/CTS — RTS is asserted during transmissions. CTS gates transmissions.

• RTS/XON/XOFF — RTS is asserted during transmissions. CTS is ignored. XON and

OFF gate transmissions.

• RTS On/CTS — RTS is always asserted. CTS gates transmissions.

RTS/CTS Scan Control — RTS is asserted during transmissions. CTS gates transmissions and

controls enable and disable state

of scanner.

RS-232 Parameters

Product Reference Guide

257

RS-232/USB COM Parameters

Intercharacter Delay

This parameter specifies the intercharacter delay between the end of one character and the

beginning of the next. The delay can be set within a range of zero (0) to 990 milliseconds in

10ms increments. A setting of zero specifies no delay.

To set the delay:

1. Determine the desired setting in milliseconds.

2. Divide the desired setting by 10 (setting is in 10ms increments). Pad the result with lead-

ing zeroes to yield two digits. For example: 0 = 00, 5 = 05, 20 = 20, etc.

3. Scan the ENTER/EXIT PROGRAMMING MODE bar code to enter Programming

4. Go to page 47 and scan the bar code: SELECT INTERCHARACTER DELAY SET-

TING.

5. Scan the appropriate two digits from the keypad in Appendix D, Keypad, that represent

the duration which was determined in the steps above. You will hear a two-beep indica-

tion after the last character.

If you make a mistake before the last character, scan the CANCEL bar code to

abort and not save the entry string. You can then start again at the beginning.

6. Scan the ENTER/EXIT PROGRAMMING MODE bar code to exit.

This completes the procedure. See Tabl e 25 for some examples of how to set this feature.

Table 25. Intercharacter Delay Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

50ms 150ms 600ms 850ms

Divide by 10 (pad with leading

zer

oes to yield two-digits)

05 15 60 85

3 Scan ENTER/EXIT PROGRAMMING MODE

4 Scan SELECT INTERCHARACTER DELAY SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘5’ ‘5’ and ‘0’ ‘6’ and ‘0’ ‘8’ and ‘5’

6 Scan ENTER/EXIT PROGRAMMING MODE

References

258

Gryphon™ I GD44XX

GBT4400/GM440X

ACK NAK Options

This enables/disables the ability of the reader to support the RS-232 ACK/NAK protocol.

When configured, the reader and/or host sends an “ACK” when it receives data properly, and

sends “NAK” when the data is in error.

Options are:

•Disable

• Enable for label transmission — The reader expects an ACK/NAK response from the host

when a label is sent.

•

Enable for host-command acknowledge — The reader will respond with ACK/NAK

when t

he host sends a command.

• Enable for label transmission and host-command acknowledge

ACK Character

This setting specifies an ASCII character or hex value to be used as the ACK character. ASCII

characters or any hex value from 0 to 0xFF can be selected.

Setting to previously defined characters such as XON, XOFF, or host com-

mands conflicts with normal operation of these characters. 8-bit data is not

reco

gnized when the option

Data Bits

has been set as 7 Data Bits.

1. Determine the desired character or value.

2. Use the ASCII Chart on the inside back cover of this manual to find the hex equivalent

for the desired character/value.

3. Go to page 50 and scan ENTER/EXIT PROGRAMMING MODE to enter Program-

ming Mode.

4. Scan the bar code: SELECT ACK CHARACTER SETTING.

5. Scan the appropriate two alphanumeric

characters

from the keypad in Appendix D, Key-

pad, that represent the desired character/value in step 1 above. The second character will

cause a two-beep indication.

6. Scan the ENTER/EXIT PROGRAMMING MODE bar code to exit.

See Table 26 for some examples of how to set this feature.

Table 26. ACK Character Setting Examples

STEP ACTION EXAMPLES

1 Desired Character/Value

ACK $ @ >

Hex equivalent from

ASCII

Chart

0x06 0x24 0x40 0x3E

3 Scan ENTER/EXIT PROGRAMMING MODE

4 Scan SELECT ACK CHARACTER SETTING

Scan Two Characters from

Appendix D, Keypad

‘0’ and ‘6’ ‘2’ and ‘4’ ‘4’ and ‘0’ ‘3’ AND ‘E’

6 Scan ENTER/EXIT PROGRAMMING MODE

RS-232 Parameters

Product Reference Guide

259

NAK Character

This setting specifies an ASCII character or hex value to be used as the NAK character. ASCII

characters or any hex value from 0 to 0xFF can be selected.

Setting to previously defined characters such as XON, XOFF, or host

commands conflicts with normal operation of these characters. 8-

bit data is not recognized when the option

Data Bits

has been set

as 7 Data Bits.

To set this feature:

1. Determine the desired character or value.

Use the ASCII Chart on the inside back cover of this manual to find the hex equivalent

for the desired character/value.

3. Go to page 50 and scan the ENTER/EXIT PROGRAMMING MODE bar code to enter

Programming Mode.

4. Scan the bar code: SELECT NAK CHARACTER SETTING.

5. Scan the appropriate two alphanumeric

characters

from the keypad in Appendix D, Key-

pad, that represent the desired character/value in step 1 above. The second character will

cause a two-beep indication.

6. Scan the ENTER/EXIT PROGRAMMING MODE bar code to exit Programming

This completes the procedure. See Tabl e 27 for some examples of how to set this feature.

Table 27. NAK Character Setting Examples

STEP ACTION EXAMPLES

1 Desired Character/Value

NAK $ @ >

Hex equivalent from

ASCII

Chart

0x15 0x24 0x40 0x3E

3 Scan ENTER/EXIT PROGRAMMING MODE

4 Scan SELECT NAK CHARACTER SETTING

Scan Two Characters From

Appendix D, Keypad

‘1’ and ‘5’ ‘2’ and ‘4’ ‘4’ and ‘0’ ‘3’ AND ‘E’

6 Scan ENTER/EXIT PROGRAMMING MODE

References

260

Gryphon™ I GD44XX

GBT4400/GM440X

ACK NAK Timeout Value

This option specifies the amount of time the reader waits for an ACK character from the host

following label transmission. The selectable timeout range is 200 milliseconds to 15,000ms (15

seconds) in 200ms increments. A selection of 0 disables the timeout.

To set this value:

1. Determine the desired setting in milliseconds.

2. Divide the desired setting by 200 (setting is in 200ms increments). Pad the result with

leading z

eroes to yield two digits. For example: 0 = 00, 5 = 05, 20 = 20, etc.

3. Go to page 51 and scan the ENTER/EXIT PROGRAMMING MODE bar code to enter

Programming Mode.

4. Scan the bar code: SELECT ACK NAK TIMEOUT VALUE SETTING.

5. Scan the appropriate two digits from the keypad in Appendix D, Keypad, that represent

the duration which was determined in the steps above. You will hear a two-beep indica-

tion after the last character.

If you make a mistake before the last character, scan the CANCEL bar code

to abort and not save the entry string. You can then start again at the

beginning.

6. Scan the ENTER/EXIT PROGRAMMING MODE bar code to exit Programming

Mode.

This completes the procedure. See Tabl e 28 for some examples of how to set this feature.

Table 28. ACK NAK Timeout Value Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

200ms 1,000ms (1 sec.) 5200ms (5.2 sec.) 15,000ms (15 sec.)

2 Divide by 200

01 05 26 75

3 Scan ENTER/EXIT PROGRAMMING MODE

4 Scan SELECT ACK NAK TIMEOUT VALUE SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘1’ ‘0’ and ‘5’ ‘2’ and ‘6’ ‘7’ and ‘5’

6 Scan ENTER/EXIT PROGRAMMING MODE

RS-232 Parameters

Product Reference Guide

261

ACK NAK Retry Count

This feature specifies the number of times the reader retries a label transmission due to a retry

condition. The selectable range is from 1 to 254 retries. A selection of 0 disables the count, and

a selection of 255 specifies unlimited retries.

To set this feature:

1. Determine the desired setting.

2. Pad the number with leading zeroes to yield three digits. For example: 0 = 000, 5 = 005,

= 0

20, etc.

3. Go to page 51 and scan the ENTER/EXIT PROGRAMMING MODE bar code to enter

Programming Mode.

4. Scan the bar code: SELECT ACK NAK RETRY COUNT SETTING.

5. Scan the appropriate three digits from the keypad in Appendix D, Keypad, that represent

the number which was determined in the steps abo

e. You will hear a two-beep indication

after the last character.

If you make a mistake before the last character, scan the CANCEL bar code

to abort and not save the entry string. You can then start again at the

beginning.

6. Scan the ENTER/EXIT PROGRAMMING MODE bar code to exit Programming

Mode.

This completes the procedure. See Tabl e 29 for some examples of how to set this feature.

Table 29. ACK NAK Retry Count Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

Disable Retry

Count

3 Retries 54 Retries Unlimited Retries

2 Pad with leading zero(es)

000 003 054 255

3 Scan ENTER/EXIT PROGRAMMING MODE

4 Scan SELECT ACK NAK RETRY COUNT SETTING

Scan Three Characters From

Appendix D, Keypad

‘0’, ‘0’ and ‘0’ ‘0’, ‘0’ and ‘3’ ‘0’, ‘5’ and ‘4’ ‘2’, ‘5’ and ‘5’

6 Scan ENTER/EXIT PROGRAMMING MODE

References

262

Gryphon™ I GD44XX

GBT4400/GM440X

Disable Character

Specifies the value of the RS-232 host command used to disable the reader.

ASCII characters or any hex value from 0 to

0xFF can be selected.

Setting to previously defined characters such as XON, XOFF, or host

commands conflicts with normal operation of these characters. 8-

bit data is not recognized when the option

Data Bits

has been set

as 7 Data Bits.

To set the value:

1. Determine the desired character or value. A setting of 0xFF indicates the Disable Charac-

ter is not used (not available).

2. Use the ASCII Chart on the inside back cover of this manual to find the hex equivalent

for the desired character/value.

3. Go to page 53 and scan the ENTER/EXIT PROGRAMMING MODE bar code to enter

Programming Mode.

4. Scan the bar code: SELECT DISABLE CHARACTER SETTING.

5. Scan the appropriate two alphanumeric

characters

from the keypad in Appendix D, Key-

pad, that represent the desired character/value in step 1 above. The second character will

cause a two-beep indication.

6. Scan the ENTER/EXIT PROGRAMMING MODE bar code to exit Programming

Mod

This completes the procedure. See Tabl e 30 for some examples of how to set this feature.

Table 30. Disable Character Setting Examples

STEP ACTION EXAMPLES

1 Desired character/value

‘d’ ‘}’ ‘D’

Disable Command

Not Used

Hex equivalent from

ASCII

Chart

0x64 0x7D 0x44 0xFF

3 Scan ENTER/EXIT PROGRAMMING MODE

4 Scan SELECT DISABLE CHARACTER VALUE SETTING

Scan Two Characters From

Appendix D, Keypad

‘6’ and ‘4’ ‘7’ and ‘D’ ‘4’ and ‘4’ ‘F’ AND ‘F’

6 Scan ENTER/EXIT PROGRAMMING MODE

RS-232 Parameters

Product Reference Guide

263

Enable Character

Specifies the value of the RS-232 host command used to enable the reader.

ASCII characters or any hex value from 0 to

0xFF can be selected.

Setting to previously defined characters such as XON, XOFF, or host

commands conflicts with normal operation of these characters. 8-

bit data is not recognized when the option

Data Bits

has been set

as 7 Data Bits.

To set this feature:

Determine the desired character or value. A setting of

0xFF indicates the Enable Character is

not used (not available).

1. Determine the desired character or v

alue.

2. Use the ASCII Chart on the inside back cover of this manual to find the hex equivalent

for the desired character/value.

3. Go to page 53 and scan the ENTER/EXIT PROGRAMMING MODE bar code to enter

Programming Mode.

4. Scan the bar code: SELECT ENABLE CHARACTER SETTING.

5. Scan the appropriate two alphanumeric

characters

from the keypad in Appendix D, Key-

pad, that represent the desired character/value in step 2 above. The second character will

cause a two-beep indication.

6. Scan the ENTER/EXIT PROGRAMMING MODE bar code to exit Programming

Mod

This completes the procedure. See Tabl e 31 for some examples of how to set this feature.

Table 31. Enable Character Setting Examples

STEP ACTION EXAMPLES

1 Desired character/value

‘e’ ‘}’ ‘E’

Enable Command

Not Used

Hex equivalent from

ASCII

Chart

0x65 0x7D 0x45 0xFF

3 Scan ENTER/EXIT PROGRAMMING MODE

4 Scan SELECT ENABLE CHARACTER VALUE SETTING

Scan Two Characters From

Appendix D, Keypad

‘6’ and ‘5’ ‘7’ and ‘D’ ‘4’ and ‘5’ ‘F’ AND ‘F’

6 Scan ENTER/EXIT PROGRAMMING MODE

References

264

Gryphon™ I GD44XX

GBT4400/GM440X

Keyboard Interface

Wedge Quiet Interval

Specifies the amount of time the reader looks for keyboard activity before it breaks the keyboard

connection in order to transmit data to host. The range is from 0 to 990ms in 10ms increments.

This feature applies ONLY to the Keyboard Wedge interface.

1. Determine the desired setting in milliseconds.

2. Divide the desired setting by 10 (setting is in 10ms increments). Pad the result with lead-

ing zeroes to yield two digits. For example: 0 = 00, 5 = 05, 20 = 20, etc.

3. Go to page 61 and scan the ENTER/EXIT PROGRAMMING MODE bar code to enter

Prog. Mode.

4. Scan the bar code: SELECT WEDGE QUIET INTERVAL SETTING.

5. Scan the appropriate two digits from the keypad in Appendix D, Keypad, that represent

the duration which was determined in the steps above. You will hear a two-beep indica-

tion after the last character.

If you make a mistake before the last character, scan the CANCEL bar code to

abort and not save the entry string. You can then start again at the beginning.

6. Scan the ENTER/EXIT PROGRAMMING MODE bar code to exit.

This completes the procedure to set the Wedge Quiet Interval. See Ta ble 32 for some examples

of how to set this feature.

Table 32. Wedge Quiet Interval Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

10ms 150ms 600ms 850ms

Divide by 10 (and pad with

leading ze

roes)

01 15 60 85

3 Scan ENTER/EXIT PROGRAMMING MODE

4 Scan SELECT WEDGE QUIET INTERVAL SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘1’ ‘1’ and ‘5’ ‘6’ and ‘0’ ‘8’ and ‘5’

6 Scan ENTER/EXIT PROGRAMMING MODE

Keyboard Interface

Product Reference Guide

265

Intercharacter Delay

This parameter specifies the intercharacter delay between the end of one character and the

beginning of the next. The delay can be set within a range of zero (0) to 990 milliseconds in

10ms increments. A setting of zero specifies no delay.

This feature applies ONLY to the Keyboard Wedge interface.

To set the delay:

1. Determine the desired setting in milliseconds.

2. Divide the desired setting by 10 (setting is in 10ms increments). Pad the result with lead-

ing zeroes to yield two digits. For example: 0 = 00, 5 = 05, 20 = 20, etc.

3. Go to page 47 and scan the ENTER/EXIT PROGRAMMING MODE bar code to enter

Programming Mode.

4. Scan the bar code: SELECT INTERCHARACTER DELAY SETTING.

5. Scan the appropriate two digits from the keypad in Appendix D, Keypad, that represent

the duration which was determined in the steps above. You will hear a two-beep indica-

tion after the last character.

If you make a mistake before the last character, scan the CANCEL bar code

to abort and not save the entry string. You can then start again at the

beginning.

6. Scan the ENTER/EXIT PROGRAMMING MODE bar code to exit Programming

Mode.

This completes the procedure. See Tabl e 33 for some examples of how to set this feature.

Table 33. Intercharacter Delay Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

50ms 150ms 600ms 850ms

Divide by 10 (and pad with

leading zer

oes to yield two-

digits)

05 15 60 85

3 Scan ENTER/EXIT PROGRAMMING MODE

4 Scan SELECT INTERCHARACTER DELAY SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘5’ ‘1’ and ‘5’ ‘6’ and ‘0’ ‘8’ and ‘5’

6 Scan ENTER/EXIT PROGRAMMING MODE

References

266

Gryphon™ I GD44XX

GBT4400/GM440X

Intercode Delay

Specifies the delay between labels transmitted to the host for this interface. The selectable range

for this feature is from 0 to 99 seconds.

Follow these instructions to set this feature:

1. Determine the desired setting.

2. Pad the number with leading zeroes to yield two digits. For example: 0 = 00, 5 = 05, 20 =

20, etc

Go to page 61 and scan the ENTER/EXIT PROGRAMMING MODE bar code to enter

Programming Mode.

4. Scan the bar code: SELECT INTERCODE DELAY SETTING.

5. Scan the appropriate two digits from the keypad in Appendix D, Keypad, that represent

the duration which was determined in the steps above. You will hear a two-beep indica-

tion after the last character.

If you make a mistake before the last character, scan the CANCEL bar code

to abort and not save the entry string. You can then start again at the

beginning.

6. Scan the ENTER/EXIT PROGRAMMING MODE bar code to exit Programming

Mode.

This completes the procedure. See Tabl e 34 for some examples of how to set this feature.

Table 34. Wedge Intercode Delay Examples

STEP ACTION EXAMPLES

1 Desired Setting

No Delay 5 Seconds 60 Seconds 99 Seconds

2 Pad with leading zero(es)

00 05 60 99

3 Scan ENTER/EXIT PROGRAMMING MODE

4 Scan SELECT INTERCODE DELAY SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘0’ ‘0’ and ‘5’ ‘6’ and ‘0’ ‘9’ AND ‘9’

6 Scan ENTER/EXIT PROGRAMMING MODE

Symbologies

Product Reference Guide

267

Symbologies

Set Length

Length Control allows you to select either variable length decoding or fixed length decoding for

the specified symbology.

Variable Length:

For variable length decoding, a minimum and maximum length may be set.

Fixed Length:

For fixed length decoding, two different lengths may be set.

Set Length 1

This feature specifies one of the bar code lengths for Length Control. Length 1 is the minimum

label length if in Variable Length Mode, or the first fixed length if in Fixed Length Mode.

Length includes the bar code’s data characters only.

The number of characters that can be set varies, de

pending on the symbology. Reference the

page for your selected symbology to see specific variables.

1. Determine the desired character length (varies depending on symbology).

Pad the number

with leading zeroes to yield two digits. For example: 0 = 00, 5 = 05, 20 = 20, etc.

2. Go to the Set Length page for your selected symbology and scan the ENTER/EXIT PRO-

GRAMMING MODE bar code to enter Programming Mode.

3. Scan the bar code to SELECT LENGTH 1 SETTING for your selected symbology.

4. Scan the appropriate two digits from the keypad in Appendix D, Keypad, that represent

the length setting which was determined in the s

eps above. You will hear a two-beep indi-

cation after the last character.

If you make a mistake before the last character, scan the CANCEL bar code to abort

and not save the entry string. You can then start again at the beginning.

5. Scan the ENTER/EXIT PROGRAMMING MODE bar code to exit Prog Mode.

Set Length 2

This feature allows you to set one of the bar code lengths for the specified symbology. Length 2

is the maximum label length if in Variable Length Mode, or the second fixed length if in Fixed

Length Mode. See the page for the specific symbology for parameters.

The length

that can be set varies depending on the symbology. A

setting of 0 specifies to ignore

this length (only one fixed length).

Follow these instructions to set this feature:

1. Determine the desired character length (from 1 to 50 — or 0

to ignore this length). Pad

the number with leading zeroes to yield two digits. For example: 0 = 00, 5 = 05, 20 = 20,

etc.

2. Go to the Set Length page for your selected symbology and scan the ENTER/EXIT PRO-

GRAMMING MODE bar code to enter Programming Mode.

3. Scan the bar code to SELECT LENGTH 2 SETTING for your selected symbology.

References

268

Gryphon™ I GD44XX

GBT4400/GM440X

4. Scan the appropriate two digits from the keypad in Appendix D, Keypad that represent

the length setting which was determined in the st

eps above. You will hear a two-beep indi-

cation after the last character.

If you make a mistake, before the last character scan the CANCEL bar code

to abort and not save the entry string. You can then start again at the

beginning.

5. Scan the ENTER/EXIT PROGRAMMING MODE bar code to exit Programming

Mode.

This completes the procedure.

Data Editing

CAUTION

It is not recommended to use these features with IBM interfaces.

When a bar code is scanned, additional information can be sent to the host computer along

with the bar code data. This combination of bar code data and supplementary user-defined data

is called a “message string.” The Data Editing features can be used to build specific user-defined

data into a message string.

There are several types of selectable data characters that can be sent before and after

scanned

data. You can specify if they should be sent with all symbologies, or only with specific

symbologies. Figure 15 shows the available elements you can add to a message string:

Figure 15. Breakdown of a Message String

Prefix SuffixAIM IDLabel ID Label IDBar Code Data

00 - 20 Characters (ASCII)

Label ID Transmission:

Enable this option to

transmit the Label ID you

configure for the scanned

symbology.

AIM ID: This function is used to identify and display the

common label identifier for its symbology. When enabled,

this ID code will be transmitted before the scanned bar

code data.

OR...

Additional advanced editing is available. See the Advanced formatting fea-

tures in the Datalogic Aladdin configuration software, or contact Technical

Supp

ort (as described on

page 10

) for more information.

Data Editing

Product Reference Guide

269

Please Keep In Mind...

• Modifying a message string is not a mandatory requirement. Data editing is a sophisti-

cated feature allowing highly customizable output for advanced users. F

actory default set-

tings for data editing is typically set to NONE.

• A prefix or suffix may be applied only to a specified

symbology (reference "1D Code

Selection" starting on page 111) or across all symbologies (set via the Global features in

this chapter).

• You can add any character from the ASCII Chart (from 00-FF) on the inside back cover of

this manual as a prefix, suffix or Label ID.

• Enter prefixes and suffixes in the order in which

you want them to appear on the output.

Global Prefix/Suffix

Up to 20 ASCII characters may be added as a prefix (in a position before the bar code data) and/

or as a suffix (in a position following the bar code data) as indicated in Figure 16.

Figure 16. Prefix and Suffix Positions

Prefix SuffixAIM IDLabel ID Label IDBar Code Data

00 - 20 Characters (ASCII)

AND

OR...

Example: Setting a Prefix

In this example, we’ll set a prefix for all symbologies.

1. Determine which ASCII character(s) are to be added to scanned bar code

data. In this

example, we’ll add a dollar sign (‘$’) as a prefix.

2. Go to page 76 and scan the ENTER/EXIT PROGRAMMING MODE bar code, then

scan the SET GLOBAL PREFIX bar code.

3. Reference the ASCII Chart on the inside back cover of this manual to find the hex value

assigned to the desired character. The corresponding hex number for the ‘$’

character is

24. To enter this selection code, scan the ‘2’ and ‘4’ bar codes from Appendix D, Keypad.

If you make a mistake before the last character, scan the CANCEL bar code

to abort and not save the entry string. You can then start again at the

beginning.

4. If less than the expected string of 20 characters are selected, scan the ENTER/EXIT bar

code to terminate the string.

5. Scan the ENTER/EXIT bar code once again to exit Programming Mode.

6. The resulting message string would appear as follows:

Scanned bar code data: 12

5

Resulting message string output: $123

References

270

Gryphon™ I GD44XX

GBT4400/GM440X

Global AIM ID

This feature enables/disables addition of AIM IDs for all symbology

types.

AIM label identifiers (as opposed to custom characters you select yourself as with label

identifiers) can be included with scanned bar code data. AIM label identifiers consist of three

characters as follows:

• A close brace character (ASCII ‘]’), followed by...

• A code character (see the table below), followed by...

• A modifier character (the modifier charac

ter is symbol dependent).

SYMBOLOGY CHAR SYMBOLOGY CHAR

UPC/EAN

a. UPC-A and UPC-E labels are converted to EAN 13 when adding AIM IDs.

Code 128/GS1-128 C

Code 39 and



Code 32

DataBar Omnidirectional,

taBar Expanded

dabar F Standard 2 of 5 S

Interleaved 2 of 5 I ISBN

b. ISBN (X with a 0 modifier character)

Code 93 G Code 11 H

Figure 17. AIM ID

Prefix SuffixLabel ID Label IDBar Code DataAIM ID

Data Editing

Product Reference Guide

271

Label ID

A Label ID is a customizable code of up to three ASCII characters (each can be one of hex 0x01-

0xFF), used to identify a bar code (symbology) type. It can be appended previous to or

following the transmitted bar code data depending upon how this option is enabled. This

feature provides options for configuring custom Label IDs as a pre-loaded set (see "Label ID:

Pre-loaded Sets" below) or individually per symbology (see "Label ID: Set Individually Per

Symbology" on page 274). If you wish to program the reader to always include an industry

standard label identifier for ALL symbology types, see "Global AIM ID" on page 77.

Label ID: Pre-loaded Sets

The reader supports two pre-loaded sets of Label IDs. Table 35 shows the USA and the EU sets.

CAUTION

When changing from one Label ID set to another, all other reader configu-

ration settings, including the host interf

ace type, will be erased and set to

the standard factory defaults. Any custom configuration or custom defaults

will be lost.

Table 35

Label ID Pre-loaded Sets

Symbology

USA Label ID set EU Label ID set

Default

Character

Default

ASCII

Default

Character

Default

ASCII

ABC CODABAR

S 530000 S 530000

ANKER PLESSEY

o 6F0000 o 6F0000

AZTEC

Az 417A00 ! 210000

CHINA SENSIBLE CODE

$S 245300 $S 245300

CODABAR

% 250000 R 520000

CODE11

CE 434500 b 620000

CODE128

# 230000 T 540000

CODE32

A 410000 X 580000

CODE39

* 2A0000 V 560000

CODE39 CIP

Y 590000 Y 590000

CODE39 DANISH PPT

$Y 245900 $Y 245900

CODE39 LAPOSTE

$a 246100 $a 246100

CODE39 PZN

$Z 245A00 $Z 245A00

CODE93

& 260000 U 550000

DATABAR 14

R4 523400 u 750000

References

272

Gryphon™ I GD44XX

GBT4400/GM440X

DATABAR 14 COMPOSITE

R4 523400 c 523400

DATABAR EXPANDED

RX 525800 t 740000

DATABAR EXPANDED COMPOSITE

RX 525800 d 525800

DATABAR LIMITED

RL 524C00 v 760000

DATABAR LIMITED COMPOSITE

RL 524C00 i 524C00

DATA MATRIX

Dm 446D00 w 770000

EAN128

000000 k 6B0000

EAN128 COMPOSITE

000000 $E 244500

EAN13

F 460000 B 420000

EAN13 P2

F 460000 L 4C0000

EAN13 P5

F 460000 M 4D0000

EAN13 COMPOSITE

F 460000 $F 244600

EAN8

FF 464600 A 410000

EAN8 P2

FF 464600 J 4A0000

EAN8 P5

FF 464600 K 4B0000

EAN8 COMPOSITE

FF 464600 $G 244700

FOLLET 2OF5

O 4F0000 O 4F0000

GTIN

G 470000 $A 244100

GTIN2

G2 473200 $B 244200

GTIN5

G5 473500 $C 244300

I2OF5

i 690000 N 4E0000

IATA INDUSTRIAL 2OF5

IA 494100 & 260000

INDUSTRIAL 2OF5

W 570000 W 570000

ISBN

I 490000 @ 400000

ISBT128 CONCAT

f 660000 f 660000

ISSN

n 6E0000 n 6E0000

MAXICODE

MC 4D4300 x 780000

MICRO QR

$Q 245100 $Q 245100

MICRO PDF

mP 6D5000 8 380000

Symbology

USA Label ID set EU Label ID set

Default

Character

Default

ASCII

Default

Character

Default

ASCII

Data Editing

Product Reference Guide

273

MSI

@ 400000 Z 5A0000

PDF417

P 500000 r 720000

PLESSEY

a 610000 a 610000

POSTAL AUSTRALIAN

$K 244B00 $K 244B00

POSTAL IMB

$V 245600 $V 245600

POSTAL JAPANESE

$R 245200 $R 245200

POSTAL KIX

$U 245500 $U 245500

POSTAL PLANET

$W 245700 $W 245700

POSTAL PORTUGAL

$P 245000 $P 245000

POSTAL POSTNET BB

$L 244C00 $L 244C00

POSTAL ROYAL MAIL

$M 244D00 $M 244D00

POSTAL SWEDISH

$X 245800 $X 245800

POSTNET

1 310000 1 310000

QR CODE

QR 515200 y 790000

S25

s 730000 P 500000

TRIOPTIC

$T 245400 $T 245400

UPCA

A 410000 C 430000

UPCA P2

A 410000 F 460000

UPCA P5

A 410000 G 470000

UPCA COMPOSITE

A 410000 $H 244800

UPCE

E 450000 D 440000

UPCE P2

E 450000 H 480000

UPCE P5

E 450000 I 490000

UPCE COMPOSITE

E 450000 $J 244A00

Symbology

USA Label ID set EU Label ID set

Default

Character

Default

ASCII

Default

Character

Default

ASCII

References

274

Gryphon™ I GD44XX

GBT4400/GM440X

Label ID: Set Individually Per Symbology

To configure a Label ID individually for a single symbology:

1. Go to page 81 and scan the ENTER/EXIT bar code.

2. Select Label ID position as either BEFORE (Enable as Prefix) or AFTER (Enable as suf-

fix) by scanning the appropriate bar code in the section "Label ID Control" on page 81.

Reference Figure 18 for Label ID positioning options if multiple identification features are

enabled.

3. Scan a bar code to select the symbology for which you wish to configure a custom Label

from the section "Label ID S

ymbology Selection • 1D Symbologies" on page 82.

4. Determine the desired character(s) (y

ou may choose up

to three) which will represent the

Label ID for the selected symbology.

5. Turn to the ASCII Chart on the inside back cover of this manual and find the equivalent

hex digits associated with your choice of Label ID. Fo

r example, if you wish to select an

equal sign (=) as a Label ID, the chart indicates its associated hex characters as 3D. Turn to

"Keypad" starting on page 319 and scan the bar codes representin

g the hex characters

determined. For the example given, the characters ‘3’ and ‘D’ would be scanned. Mor

examples of Label ID settings are provided in Tabl e 36.

If you make a mistake before the last character, scan the CANCEL bar code

to abort and not save the entry string. You can then start again at the

beginning.

6. Scan the ENTER/EXIT bar code to exit Label ID entry.

7. Scan the ENTER/EXIT bar code once again to exit Programming Mode.

This completes the steps to configure a Label ID for a given symbology.

Figure 18. Label ID Position Options

Prefix SuffixLabel ID Label IDBar Code DataAim ID

Data Editing

Product Reference Guide

275

Table 36

STEP ACTION EXAMPLES

1. Scan the ENTER/EXIT bar code

(Scanner enters Programming Mode)

Determine placement of the

Label ID char

acters BEFORE or

AFTER with regard to scanned

data using

"Label ID

Control" starting on page 81

Enable as Prefix Enable as Suffix Enable as Prefix Enable as Suffix

Scan the bar code selecting

the symbology ty

pe you wish

to designate label ID

characters for using

"Label ID

Symbology Selection • 1D

Symbologies" starting on page

DataBar

Omnidirectional

Code 39 Interleaved 2 of 5 Code 32

Custom Label ID example

(desired characters):

D B * = C 3 + P H

Find hex equivalents from the

ASCII Chart

(inside back

cover), then scan in

these

digits/characters using the bar

codes in the section:

"Keypad" starting on page 319

If you make a mistake before

the last character, scan the

CANCEL bar code to abort and

not save the entry string. You

can then start again at the

beginning.

44 42 2A 3D 43 33 2B 50 48

6. Scan the ENTER/EXIT bar code

(Scanner exits Label ID entry)

Scan the ENTER/EXIT bar code

once again

(Scanner exits Programming Mode)

Result:

DB*[bar code

data]

[bar code

data]=C3

+[bar code data] [bar code data]PH

. Label ID Examples

References

276

Gryphon™ I GD44XX

GBT4400/GM440X

Character Conversion

Character conversion is an eight byte configuration item. The eight bytes are 4 character pairs

represented in hexadecimal ASCII values. The first character in the pair is the character that will

be converted. The second character in the pair is the character to convert to. If the character to

convert in a pair is FF, then no conversion is done.

For example, if you have the character conversion configuration item set to the following:

4142

3132FFFFFFFF

The first pair is 4142 or AB (41 hex is an ASCII capital A, 42 hex is an ASCII capital B) and the

second pair

is 3132 or 12 (31 hex is an ASCII 1, 32 is an ASCII 2). The other two pairs are

FFFF and FFFF.

With the label, AB12BA21, it would look as follows after the character conversion: BB22B

B22.

The A characters were converted to B characters and the 1 characters were converted to 2

charact

ers. Nothing is done with the last two character pairs, since they are all FF.

To set Character Conversion:

1. Go to page 88 and scan the ENTER/EXIT bar code.

2. Scan the “Configure Character Conversion” bar code.

3. Determine the desired string. Sixteen positions must be determined as in the above exam-

ple. Next, turn to the ASCII Chart on the inside back cover of this manual and find the

equivalent hex digits needed to fulfill the string.

4. Turn to Appendix D, Keypad and scan the bar codes represent

ing the

hex characters deter-

mined in the previous step.

5. Scan the ENTER/EXIT bar code to exit Programming Mode.

If less than the expected string of 16 characters are selected, scan the ENTER/

EXIT bar code twice to accept the selections and exit Programming Mode.

Reading Parameters

Product Reference Guide

277

Reading Parameters

Good Read LED Duration

This feature specifies the amount of time that the Good Read LED remains on following a good

read. The good read LED on time can be set within a range of 10 milliseconds to 2,550

milliseconds (0.001 to 2.55 seconds) in 100ms increments.

Follow these instructions to set this feature:

1. Determine the desired setting in milliseconds. A setting of 0 means that the good read

LED stays on until the next time

the trigger is pulled.

2. Divide the desired setting by 10 (setting is in 100ms increments). Pad the result with lead-

ing zeroes to yield three digits. For example: 0 = 000, 5 = 000, 20 = 020, etc.

3. Go to page 96 and scan the ENTER/EXIT PROGRAMMING MODE bar code to enter

Programming Mode.

4. Scan the bar code: SELECT GOOD READ LED DURATION SETTING.

5. Scan the appropriate three digits from the keypad in Appendix D, Keypad representing

the duration which was determined in the steps above. You will hear a two-beep indica-

tion after the last character.

If you make a mistake before the last character, scan the CANCEL bar code

to abort and not save the entry string. You can then start again at the

beginning.

6. Scan the ENTER/EXIT PROGRAMMING MODE bar code to exit Programming

Mode.

This completes the procedure. See Tabl e 37 for some examples of how to set this feature.

Table 37. Good Read LED Duration Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

Good Read LED

stays on until next

trigger pull (00)

20ms 150ms 2550ms (2.55 sec.)

Divide by 10 (and pad with

leading ze

roes)

000 002 015 255

3 Scan ENTER/EXIT PROGRAMMING MODE

4 Scan

SELECT GOOD READ LED DURATION SETTING

Scan Three Characters From

Appendix D, Keypad

‘0’, ‘0’ and ‘0’ ‘0’, ‘0’ and ‘2’ ‘0’, ‘1’ and ‘5’ ‘2’, ‘5’ and ‘5’

6 Scan ENTER/EXIT PROGRAMMING MODE

References

278

Gryphon™ I GD44XX

GBT4400/GM440X

Scanning Features

Scan Mode

This mode is associated with typical handheld reader operation. Selects the scan operating mode

for the reader. The following selections are valid for all models:

Trigger Single:

When the trigger is pulled, scanning is activated until one of the following

occurs:

- Scanning Active Time has elapsed

- a label has been read

- the trigger is released

Trigger Hold Multiple:

When the trigger is pulled, scanning starts and the product scans until

the trigger is released or Scanning Active Time has elapsed. Reading a label does not disable

scanning. Double Read Timeout prevents undesired multiple reads of the same label while in

this mode.

Trigger Pulse Multiple:

When the trigger is pulled, continuous scanning is activated until

Scanning Active Time has elapsed or the trigger has been released and pulled

again. Double

Read Timeout prevents undesired multiple reads of the same label while in this mode.

Flashing:

The reader flashes on and off regardless of the trigger status. Flash rate is controlled by

Flash On Time and Flash Off Time. When Flash is ON the imager reads continuously; when

Flash is OFF scanning is deactivated.

Always On:

No trigger pull is required to read a bar code. Scanning is continually on. If the

trigger is pulled, the reader acts as if it is in Trigger Single Mode. Double Read Timeout

prevents undesired multiple reads of the

same label while in this mode.

Stand Mode:

No trigger pull is required to read a bar code. Scanning is turned on automatically

when an item is placed in the reader’s field of view. If the trigger is pulled, the reader acts as if it

in single read mode. Double Read Timeout prevents undesired multiple reads while in this

mode.

Scanning Features

Product Reference Guide

279

Stand Mode Off Time

This feature specifies the amount of time reader illumination stays off after pulling the trigger

when in Stand Mode. The configurable range is 01 to 32 by 01 in increments of 500ms (500ms

to 16 seconds).

Follow these instructions to set this feature:

1. Determine the desired setting.

2. Pad the result with leading zeroes to yield two digits. For example: 2 = 02, 5 = 05, 20 = 20,

etc.

Go to page 101 and scan the ENTER/EXIT PROGRAMMING MODE bar code to

enter Programming Mode.

4. Scan the bar code: Set Stand Mode Illuminator Off Time.

5. Scan the appropriate two digits from the keypad in Appendix D, Keypad, that represent

the setting which was determined in the steps abo

e. You will hear a two-beep indication

after the last character.

6. Scan the ENTER/EXIT PROGRAMMING MODE bar code to exit Programming

Mod

This completes the procedure. See Tabl e 38 for some examples of how to set this feature.

Table 38. Stand Mode Off Time

STEP ACTION EXAMPLES

1 Desired Setting

500 ms 1 Second 5.5 Seconds 16 Seconds

2 Pad leading zero

01 02 11 32

3 Scan ENTER/EXIT PROGRAMMING MODE

4 Scan SELECT STAND MODE OFF TIME

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘1’ ‘0’ and ‘2’ ‘1’ and ‘1’ ‘3’ and ‘2’

6 Scan ENTER/EXIT PROGRAMMING MODE

References

280

Gryphon™ I GD44XX

GBT4400/GM440X

Scanning Active Time

This setting specifies the amount of time that the reader stays in scan ON state once the state is

entered. The range for this setting is from 1 to 255 seconds in 1-second increments.

Follow these instructions to set this feature:

1. Determine the desired setting.

2. Pad the result with leading zeroes to yield three digits. For example: 0 = 000, 5 = 005, 20

= 02

0, etc.

3. Go to page 101 and scan the ENTER/EXIT PROGRAMMING MODE bar code to

enter Programming Mode.

4. Scan the bar code: SELECT SCANNING ACTIVE TIME SETTING.

5. Scan the appropriate three digits from the keypad in Appendix D, Keypad, that represent

the duration which was determined in the steps above. You will hear a two-beep indica-

tion after the last character.

If you make a mistake before the last character, scan the CANCEL bar code

to abort and not save the entry string. You can then start again at the

beginning.

6. Scan the ENTER/EXIT PROGRAMMING MODE bar code to exit Programming

Mode.

This completes the procedure. See Tabl e 39 for some examples of how to set this feature.

Table 39. Scanning Active Time Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

1 Second 90 Sec. (1.5 min.) 180 Sec. (3 min.) 255 Seconds (4.25 min.)

2 Pad leading zero(es)

001 090 180 255

3 Scan ENTER/EXIT PROGRAMMING MODE

4 Scan SELECT SCANNING ACTIVE TIME SETTING

Scan Three Characters From

Appendix D, Keypad

‘0’, ‘0’ and ‘1’ ‘0’, ‘9’ and ‘0’ ‘1’, ‘8’ and ‘0’ ‘2’, ‘5’ and ‘5’

6 Scan ENTER/EXIT PROGRAMMING MODE

Scanning Features

Product Reference Guide

281

Aiming Duration Time

Specifies the frame of time the aiming pointer remains on after decoding a label, when in trigger

single mode. The range for this setting is from 1 to 255 seconds in 1-second increments.

Follow these instructions to set this feature:

1. Determine the desired setting.

2. Pad the result with leading zeroes to yield three digits. For example: 0 = 000, 5 = 005, 20

= 02

0, etc.

3. Go to page 104 and scan the ENTER/EXIT PROGRAMMING MODE bar code to

enter Programming Mode.

4. Scan the bar code: SELECT AIMING DURATION TIME SETTING.

5. Scan the appropriate three digits from the keypad in Appendix D, Keypad, that represent

the duration which was determined in the steps above. You will hear a two-beep indica-

tion after the last character.

If you make a mistake before the last character, scan the CANCEL bar code

to abort and not save the entry string. You can then start again at the

beginning.

6. Scan the ENTER/EXIT PROGRAMMING MODE bar code to exit Programming

Mode.

This completes the procedure. See Tabl e 40 for some examples of how to set this feature.

Table 40. Aiming Duration Time Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

1 Second 90 Sec. (1.5 min.) 180 Sec. (3 min.) 255 Seconds (4.25 min.)

2 Pad leading zero(es)

001 090 180 255

3 Scan ENTER/EXIT PROGRAMMING MODE

4 Scan SELECT AIMING DURATION TIME SETTING

Scan Three Characters From

Appendix D, Keypad

‘0’, ‘0’ and ‘1’ ‘0’, ‘9’ and ‘0’ ‘1’, ‘8’ and ‘0’ ‘2’, ‘5’ and ‘5’

6 Scan ENTER/EXIT PROGRAMMING MODE

Product Reference Guide

305

Global AIM ID

Disable 77

Set AIM ID Individually for GS1-128

Enable 79

Label ID: Pre-Loaded Sets

EU Set 80

Individually Set Label ID

Disable 81

Case Conversion

Disable

Character Conversion

No Char Conversion 88

READING PARAMETERS

Double Read Timeout

0.6 Second 89

Power On Alert

Power-up Beep 92

Good Read: When to Indicate

After Decode 92

Good Read Beep Type

Mono 93

Good Read Beep Frequency

High 93

Good Read Beep Length

80 ms 94

Good Read Beep Volume

High 95

Good Read LED Duration

300 ms 96

Scanning Features

Scan Mode

Trigger Single 97

Stand Mode Indication

Disable 98

Stand Operation

Switch to Stand Mode 99

Pick Mode

Disable 100

Stand Mode Sensitivity

Medium 100

Stand Mode Illumination Off Time

2 Seconds 101

Scanning Active Time

5 Seconds 101

Stand Illumination Control

OFF 102

Flash On Time

10 = Flash is ON for 1

Second

103

Flash Off Time

06 = Flash is OFF for

600ms

103

Aiming Pointer

Enable 104

Aiming Duration Timer

Aiming Off

After Decoding

104

Green Spot Duration

300 ms 105

Parameter Default Your Setting

Page

Number

306

Gryphon™ I GD44XX

GBT4400/GM440X

Mobile Phone Mode

Enable 105

Partial Label Reading Control

Enable 106

Decode Negative Image

Disable 106

Corded Only Features

Corded Stand Mode

Disable 107

Corded Stand Beep

Disable 108

Multiple Label Reading

Multiple Labels per Frame

Disable 109

Multiple Labels Ordering by Code Symbology

Random Order 110

Multiple Labels Ordering by Code Length

Disable 110

CODE SELECTION - 1D SYMBOLOGIES

Code EAN/UPC

Coupon Control

Enable only UPCA

coupon decoding

113

UPC-A

UPC-A Enable/Disable

Enable 114

UPC-A Check Character Transmission

Send 114

Expand UPC-A to EAN-13

Don’t Expand 115

UPC-A Number System Character Transmission

Transmit 115

UPC-A 2D Component

2D Component Not

Required

116

UPC-E

UPC-E Enable/Disable

Enable 116

UPC-E Check Character Transmission

Send 117

UPC-E 2D Component

2D Component Not

Required

117

Expand UPC-E to EAN-13

Don’t Expand 118

Expand UPC-E to UPC-A

Don’t Expand 118

UPC-E Number System Character Transmission

Transmit 119

GTIN

GTIN Formatting

Disable

119

Parameter Default Your Setting

Number

Product Reference Guide

307

EAN 13 (Jan 13)

EAN 13 Enable/Disable

Enable

120

EAN 13 Check Character Transmission

Send

120

EAN-13 Flag 1 Character

Transmit

121

EAN-13 ISBN Conversion

Disable

121

EAN-13 2D Component

2D Component Not

Required

122

ISSN

ISSN Enable/Disable

Disable

122

EAN 8

EAN 8 Enable/Disable

Enable

123

EAN 8 Check Character Transmission

Send

123

Expand EAN 8 to EAN 13

Disable

124

EAN 8 2D Component

2D Component Not

Required

124

UPC/EAN Global Settings

UPC/EAN Price Weight Check

Disable

125

UPC/EAN Quiet Zones

Two Modules

126

Add-Ons

Optional Add-ons

Disable P2, P5 and P8

127

Optional Add-On Timer

70 ms

128

Optional GS1-128 Add-On Timer

Disable

131

Code 39

Code 39 Enable/Disable

Enable

134

Code 39 Check Character Calculation

Calculate Std Check

134

Code 39 Check Character Transmission

Send

135

Code 39 Start/Stop Character Transmission

Don’t Transmit

136

Code 39 Full ASCII

Disable

136

Code 39 Quiet Zones

Small Quiet Zones on

two sides

137

Code 39 Length Control

Variable

137

Code 39 Set Length 1

138

Parameter Default Your Setting

Number

308

Gryphon™ I GD44XX

GBT4400/GM440X

Code 39 Set Length 2

139

Trioptic Code

Trioptic Code Enable/Disable

Disable

140

Code 32 (Italian Pharmaceutical Code)

Code 32 Enable/Disable

Disable

140

Code 32 Check Char Transmission

Don’t Send

141

Code 32 Start/Stop Character Transmission

Don’t Transmit

141

Code 39 CIP (French Pharmaceutical Code)

Code 39 CIP Enable/Disable

Disable 142

Special Codes

Code 39 Danish PPT Enable/Disable

Disable 142

Code 39 LaPoste Enable/Disable

Disable 143

Code 39 PZN Enable/Disable

Disable 143

Code 128

Code 128 Enable/Disable

Enable 144

Expand Code 128 to Code 39

Don’t Expand 144

Code 128 Check Character Transmission

Don’t Send 145

Code 128 Function Character Transmission

Don’t Send 145

Code 128 Sub-Code Exchange Transmission

Disable 146

Code 128 Quiet Zones

Small Quiet Zones on

two sides

146

Code 128 Length Control

Variable 147

Code 128 Set Length 1

1 148

Code 128 Set Length 2

80 149

GS1-128

GS1-128 Enable

Transmit in Code 128

Data Format

150

GS1-128 2D Component

Disable 150

ISBT 128

ISBT 128 Concatenation

Disable 151

ISBT 128 Force Concatenation

Disable 151

Parameter Default Your Setting

Page

Number

Product Reference Guide

309

ISBT 128 Concatenation Mode

Static 152

ISBT 128 Dynamic Concatenation Timeout

200 msec 153

Interleaved 2 of 5

I 2 of 5 Enable/Disable

Disable 154

I 2 of 5 Check Character Calculation

Disable 155

I 2 of 5 Check Character Transmission

Send 156

I 2 of 5 Length Control

Variable 156

I 2 of 5 Set Length 1

6 157

I 2 of 5 Set Length 2

50 158

Interleaved 2 of 5 CIP HR

Interleaved 2 of 5 CIP HR Enable/Disable

Disable 159

Follett 2 of 5

Follett 2 of 5 Enable/Disable

Disable 159

Standard 2 of 5

Standard 2 of 5 Enable/Disable

Disable 160

Standard 2 of 5 Check Character Calculation

Disable 160

Standard 2 of 5 Check Character Transmission

Send 161

Standard 2 of 5 Length Control

Variable 161

Standard 2 of 5 Set Length 1

8 162

Standard 2 of 5 Set Length 2

50 163

Industrial 2 of 5

Industrial 2 of 5 Enable/Disable

Disable 164

Industrial 2 of 5 Check Character Calculation

Disable 164

Industrial 2 of 5 Check Character Transmission

Enable 165

Industrial 2 of 5 Length Control

Variable 165

Industrial 2 of 5 Set Length 1

1 166

Industrial 2 of 5 Set Length 2

50 167

Code IATA

IATA Enable/Disable

Disable 168

IATA Check Character Transmission

Enable 168

Parameter Default Your Setting

Page

Number

310

Gryphon™ I GD44XX

GBT4400/GM440X

Codabar

Codabar Enable/Disable

Disable 169

Codabar Check Character Calculation

Don’t Calculate 169

Codabar Check Character Transmission

Send 170

Codabar Start/Stop Character Transmission

Transmit 170

Codabar Start/Stop Character Set

abcd/abcd 171

Codabar Start/Stop Character Match

Don’t Require Match 171

Codabar Quiet Zones

Small Quiet Zones on

two sides

172

Codabar Length Control

Variable 172

Codabar Set Length 1

3 173

Codabar Set Length 2

50 174

ABC Codabar

Disable 175

ABC Codabar

ABC Codabar Enable/Disable

Disable 175

ABC Codabar Concatenation Mode

Static 175

ABC Codabar Dynamic Concatenation Timeout

200 msec 176

ABC Codabar Force Concatenation

Disable 177

Code 11

Code 11 Enable/Disable

Disable 178

Code 11 Check Character Calculation

Check C and K 178

Code 11 Check Character Transmission

Send 179

Code 11 Length Control

Variable 179

Code 11 Set Length 1

4 180

Code 11 Set Length 2

50 181

GS1 DataBar™ Omnidirectional

GS1 DataBar™ Omnidirectional Enable/Disable

Disable 182

GS1 DataBar™ Omnidirectional GS1-128

Emulation

Disable 182

GS1 DataBar™ Omnidirectional 2D Component

2D component not

required

183

GS1 DataBar™ Expanded

Parameter Default Your Setting

Number

Product Reference Guide

311

GS1 DataBar™ Expanded Enable/Disable

Disable 183

GS1 DataBar™ Expanded GS1-128 Emulation

Disable 184

GS1 DataBar™ Expanded 2D Component

2D component not

required

184

GS1 DataBar™ Expanded Length Control

Variable 185

GS1 DataBar™ Expanded Set Length 1

1 186

GS1 DataBar™ Expanded Set Length 2

74 187

GS1 DataBar™ Limited

GS1 DataBar™ Limited Enable/Disable

Disable 188

GS1 DataBar™ Limited GS1-128 Emulation

Disable 188

GS1 DataBar™ Limited 2D Component

2D component not

required

189

Code 93

Code 93 Enable/Disable

Disable 189

Code 93 Check Character Calculation

Enable Check C and K 190

Code 93 Check Character Transmission

Enable 190

Code 93 Length Control

Variable 191

Code 93 Set Length 1

1 192

Code 93 Set Length 2

50 193

Code 93 Quiet Zones

Small Quiet Zones on

two sides

194

MSI

MSI Enable/Disable

Disable 194

MSI Check Character Calculation

Enable Mod10 195

MSI Check Character Transmission

Enable 195

MSI Length Control

Variable 197

MSI Set Length 1

1 197

MSI Set Length 2

50 198

Plessey

Plessey Enable/Disable

Disable 199

Plessey Check Character Calculation

Enable Plessey std.

check char. verification

199

Parameter Default Your Setting

Page

Number

312

Gryphon™ I GD44XX

GBT4400/GM440X

Plessey Check Character Transmission

Enable 200

Plessey Length Control

Variable 200

Plessey Set Length 1

1 201

Plessey Set Length 2

50 202

CODE SELECTION - 2D SYMBOLOGIES

2D Maximum Decoding Time

350msec 204

2D Structured Append

Disable 205

2D Normal/Inverse Symbol Control

Normal 205

Aztec Code Enable / Disable

Disable 206

Aztec Code Length Control

Enable 206

Aztec Code Length Control

Variable 206

Aztec Code Set Length 1

1 207

China Sensible Code Enable / Disable

Disable 209

China Sensible Code Length Control

Variable 209

China Sensible Code Set Length 1

1 210

China Sensible Code Set Length 2 7,827

211

Data Matrix Enable / Disable

Enable 212

Data Matrix Square/Rectangular Style

Both Square and

Rectangular style

212

Data Matrix Length Control

Variable 213

Data Matrix Set Length 1

1 213

Data Matrix Set Length 2 3,116

214

Maxicode Enable / Disable

Disable 215

Maxicode Primary Message Transmission

Disable 215

Maxicode Length Control

Variable 216

Maxicode Set Length 1

1 216

Maxicode Set Length 2 0145

217

PDF417 Enable / Disable

Enable 218

PDF417 Length Control

Variable 218

PDF417 Set Length 1

1 219

PDF417 Set Length 2 2,710

220

Parameter Default Your Setting

Page

Number

Product Reference Guide

313

Micro PDF417 Enable / Disable

Disable 221

Micro PDF417 Code 128 GS1-128 Emulation

Micro PDF AIM ID and

label type

221

Micro PDF417 Length Control

Variable 222

Micro PDF417 Set Length 1

1 222

Micro PDF417 Set Length 2

0366 223

QR Code Enable / Disable

Enable 224

QR Code Length Control

Variable 224

QR Code Set Length 1

1 225

QR Code Set Length 2 7,089

226

Micro QR Code Enable/Disable

Disable 227

Micro QR Code Length Control

Variable 227

Micro QR Code Set Length 1

0001 228

Micro QR Code Set Length 2 0035

229

UCC Composite Enable / Disable

Disable 230

UCC Optional Composite Timer

Timer Disabled 231

Postal Code Selection

Disable all Postal codes 232

Postnet BB Control

Disable 233

WIRELESS Features

Good Transmission Beep

Enable 236

Beep Frequency

Low 236

Beep Duration

80 msec 237

Beep Volume

High 238

Disconnect Beep

Enable 238

Docking Beep

Enable 239

Leash Alarm

Disable 239

Automatic Configuration Update

Enable 241

Copy Configuration to Scanner

N/A 241

Copy Configuration to Base Station

N/A 241

Batch Mode

Disable 242

Send Batch

N/A 242

Parameter Default Your Setting

Page

Number

314

Gryphon™ I GD44XX

GBT4400/GM440X

Erase Batch Memory

N/A 243

RF Batch Mode Transmit Delay

No Delay 243

Direct Radio Autolink

Unlink Label Required 244

Features for BT Models Only

Source Radio Address Transmission

Do not include 245

Source Radio Address Delimiter Character

No Delimiter Character 246

Link Timeout

2 Seconds 246

BT Security Features

BT Security Mode

Disable 247

Select PIN Code Length

4-character BT PIN Code 248

Set PIN Code

31323334 =

Default Pin Code is 1234

248

BT Poll Rate

20 ms 249

Powerdown Timeout

30 minutes 250

Features for Star Models Only

STAR Radio Protocol Timeout

2 seconds 251

STAR Radio Transmit Mode

ACK from cradle 252

Motion Features

Motion Aiming Control

Enable 253

Motion Sensitivity

Medium 254

Motionless Timeout

2 seconds 254

Parameter Default Your Setting

Page

Number

Product Reference Guide

315

Appendix C

Sample Bar Codes

The sample bar codes in this appendix are typical representations for their symbology types.

1D Bar Codes

UPC-A

EAN-13

978033029095

Code 39

Code 128

Interleaved 2 of 5

316

Gryphon™ I GD44XX

GBT4400/GM440X

Sample Bar Codes — continued

Code 32

Codabar

13579

Code 93

Code 11

123456789

Product Reference Guide

317

GS1 DataBar™ (RSS)

GS1 DataBar™ Expanded Stacked

10293847560192837465019283746029478450366523

GS1 DataBar™ Expanded

1234890hjio9900mnb

GS1 DataBar™ Limited

08672345650916

GS1 DataBar™ variants must be enabled t

o read the bar codes below (see GS1 DataBar™

Omnidirectional on page 182

GS1 DataBar™-14

GS1 DataBar™ Omnidirectional Truncated

55432198673467

GS1 DataBar™ Omnidirectional Stacked

90876523412674

GS1 DataBar™ Omnidirectional Stacked

78123465709811

318

Gryphon™ I GD44XX

GBT4400/GM440X

2D Bar Codes

Aztec Datamatrix

China Sensible Code MaxiCode

PDF 417

ABCabc

Micro PDF 417

BV17453

QR Code

35900G9

Micro QR Code

123456

UCC Composite

Product Reference Guide

319

Appendix D

Keypad

Use the bar codes in this appendix to enter numbers as you would select digits/characters from a

keypad.

320

Gryphon™ I GD44XX

GBT4400/GM440X

Product Reference Guide

321

Appendix E

Scancode Tables

Control Character Emulation

Control character emulation selects from different scancode tables as listed in this appendix.

Each of the control character sets below are detailed by interface type in the tables. These apply

to Wedge and USB Keyboard platforms.

Control Character 00 :

Characters from 00 to 0x1F are sent as control character Ctrl+Keys,

special keys are located from 0x80 to 0xA1.

Control Character 01 :

Characters from 00 to 0x1F are sent as control character Ctrl+Capital

Key, special keys are located from 0x80 to 0xA1.

Control Character 02 :

Special keys are located from 00 to 0x1F and characters from 0x80 to

0xFE are intended as an extended ASCII table (Microsoft Windows Codepage 1252 — See

page -328.)

Single Press and Release Keys

In the following tables, Ar↓ means Alt right pressed and Ar↑ means Alt right released and so on.

Definitions for other keys are Al (Alt left ), Cr (Control Right ) Cl (Control Left ) Sh (shift).

This method can be used for combining Alt, Control or Shift with other keys.

Example: Consider a Control character

set to 00. If AltRight+A is required before sending a

label to the host, it could be done by setting three Prefix keys in this way: 0x99 0x41 0x9A.

322

Gryphon™ I GD44XX

GBT4400/GM440X

Interface Type PC AT PS/2, USB-Keyboard or USB-Keyboard for APPLE

Table 54. Scancode Set When Control Character is 00 or 01

x0 x1 x2 x3 x4 x5 X6 x7 x8 x9 xA xB xC xD xE xF

NULL

C+@

SOH

C(S)+A

STX

C(S)+B

ETX

C(S)+C

EOT

C(S)+D

ENQ

C(S)+E

ACK

C(S)+F

BEL

C(S)+G

TAB

C(S)+J

C(S)+K

C(S)+L

Enter

C(S)+N

C(S)+O

DLE

C(S)+P

DC1

C(S)+Q

DC2

C(S)+R

DC3

C(S)+S

DC4

C(S)+T

NAK

C(S)+U

SYN

C(S)+V

ETB

C(S)+W

CAN

C(S)+X

C(S)+Y

SUB

C(S)+Z

ESC

Esc

C+\

C+]

C+^

C(S)+_

2x SP ! " # $ % & ' ( ) * + , - . /

3x 0 1 2 3 4 5 6 7 8 9 : ; < = > ?

4x @ A B C D E F G H I J K L M N O

5x P Q R S T U V W X Y Z [ \ ] ^ _

6x ` a b c d e f g h i j k l m n o

7x p q r s t u v w x y z { | } ~ Del

8x € Sh↓ Sh↑ Ins

Ent

(keyp)

F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11

9x F12 Home End Pg Up Pg Dwn     Ar↓ Ar↑ Al↓ Al ↑ Cl ↓ Cl ↑ Cr ↓

Ax Cr ↑

‫

‘ ƒ „ … † ‡ ˆ ‰ Š ‹ Ś ‹ Œ

‫

Bx ° ± ² ³ ´ µ ¶ · ¸ ¹ º » ¼ ½ ¾ ¿

Cx À Á Â Ã Ä Å Æ Ç È É Ê Ë Ì Í Î Ï

Dx Ð

‫

Ò Ó Ô Õ Ö × Ø Ù Ú Û Ü Ý Þ ß

Ex à á â ã ä å æ ç è é ê ë ì í î ï

Fx ð ñ ò ó ô õ ö ÷ ø ù ú û ü ý þ ÿ

Extended characters (sky blue) are sent through dedicated keys (when available in the selected country mode) or by using an Alt Mode sequence.

323

Gryphon™ I GD44XX

GBT4400/GM440X

Interface Type PC AT PS/2, USB-Keyboard or USB-Keyboard for APPLE — cont.

Table 55. Scancode Set When Control Character is 02

x0 x1 x2 x3 x4 x5 X6 x7 x8 x9 xA xB xC xD xE xF

0x Ar↓ Ar↑ Al↓ Al ↑ Cl ↓ Cl ↑ Cr ↓ Cr ↑ BS Tab  S+ Tab

Enter

Keypd

Enter Ins Pg Up

1x Pg Dwn Home    F6 F1 F2 F3 F4 F5 ESC F7 F8 F9 F10

2x Space ! “ # $ % & ‘ ( ) * + , - . /

3x 0 1 2 3 4 5 6 7 8 9 : ; < = > ?

4x @ A B C D E F G H I J K L M N O

5x P Q R S T U V W X Y Z [ \ ] ^ _

6x ` a b c d e f g h i j k l m n o

7x p q r s t u v w x y z { | } ~ Del

8x €

‫

‘ ƒ „ … † ‡ ˆ ‰ Š ‹ Ś ‹ Œ

‫

‘ ’ “ ” • – — ˜ ™ š › œ

‫

ž Ÿ

Bx ° ± ² ³ ´ µ ¶ · ¸ ¹ º » ¼ ½ ¾ ¿

Cx À Á Â Ã Ä Å Æ Ç È É Ê Ë Ì Í Î Ï

Dx Ð

‫

Ò Ó Ô Õ Ö × Ø Ù Ú Û Ü Ý Þ ß

Ex à á â ã ä å æ ç è é ê ë ì í î ï

Fx ð ñ ò ó ô õ ö ÷ ø ù ú û ü ý þ ÿ

Product Reference Guide 324

Interface type PC AT PS/2 Alt Mode or USB-Keyboard Alt Mode

Table 56. Scancode Set When Control Character is 00 or 01

x0 x1 x2 x3 x4 x5 X6 x7 x8 x9 xA xB xC xD xE Xf

0x Alt+000 Alt+001 Alt+002 Alt+003 Alt+004 Alt+005 Alt+006 Alt+007 BS

TAB

Alt+010 Alt+011 Alt+012

Enter

Alt+014 Alt+015

1x Alt+016 Alt+017 Alt+018 Alt+019 Alt+020 Alt+021 Alt+022 Alt+023 Alt+024 Alt+025 Alt+026

ESC

Esc

Alt+028 Alt+029 Alt+030 Alt+031

2x A+032 A+033 A+034 A+035 A+036 A+037 A+038 A+039 A+040 A+041 A+042 A+043 A+044 A+045 A+046 A+047

3x A+048 A+049 A+050 A+051 A+052 A+053 A+054 A+055 A+056 A+057 A+058 A+059 A+060 A+061 A+062 A+063

4x A+064 A+065 A+066 A+067 A+068 A+069 A+070 A+071 A+072 A+073 A+074 A+075 A+076 A+077 A+078 A+079

5x A+080 A+081 A+082 A+083 A+084 A+085 A+086 A+087 A+088 A+089 A+090 A+091 A+092 A+093 A+094 A+095

6x A+096 A+097 A+098 A+099 A+100 A+101 A+102 A+103 A+104 A+105 A+106 A+107 A+108 A+109 A+110 A+111

7x A+112 A+113 A+114 A+115 A+116 A+117 A+118 A+119 A+120 A+121 A+122 A+123 A+124 A+125 A+126 A+127

8x € Sh↓ Sh↑ Ins

Ent

(keyp)

F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11

9x F12 Home End Pg Up Pg Dwn     Ar↓ Ar↑ Al↓ Al ↑ Cl ↓ Cl ↑ Cr ↓

Ax Cr ↑ A+0161 A+0162 A+0163 A+0164 A+0165 A+0166 A+0167 A+0168 A+0169 A+0170 A+0171 A+0172 A+0173 A+0174 A+0175

Bx A+0176 A+0177 A+0178 A+0179 A+0180 A+0181 A+0182 A+0183 A+0184 A+0185 A+0186 A+0187 A+0188 A+0189 A+0190 A+0191

Cx A+0192 A+0193 A+0194 A+0195 A+0196 A+0197 A+0198 A+0199 A+0200 A+0201 A+0202 A+0203 A+0204 A+0205 A+0206 A+0207

Dx A+0208 A+0209 A+0210 A+0211 A+0212 A+0213 A+0214 A+0215 A+0216 A+0217 A+0218 A+0219 A+0220 A+0221 A+0222 A+0223

Ex A+0224 A+0225 A+0226 A+0227 A+0228 A+0229 A+0230 A+0231 A+0232 A+0233 A+0234 A+0235 A+0236 A+0237 A+0238 A+0239

Fx A+0240 A+0241 A+0242 A+0243 A+0244 A+0245 A+0246 A+0247 A+0248 A+0249 A+0250 A+0251 A+052 A+0253 A+0254 A+0255

325

Gryphon™ I GD44XX

GBT4400/GM440X

Interface type PC AT PS/2 Alt Mode or USB-Keyboard Alt Mode — cont.

Table 57. Scancode Set When Control Character is 02

x0 x1 x2 x3 x4 x5 X6 x7 x8 x9 xA xB xC xD xE xF

0x Ar↓ Ar↑ Al↓ Al ↑ Cl ↓ Cl ↑ Cr ↓ Cr ↑ BS Tab  S+ Tab

Enter

Keypd

Enter Ins Pg Up

1x Pg Dwn Home    F6 F1 F2 F3 F4 F5 ESC F7 F8 F9 F10

2x A+032 A+033 A+034 A+035 A+036 A+037 A+038 A+039 A+040 A+041 A+042 A+043 A+044 A+045 A+046 A+047

3x A+048 A+049 A+050 A+051 A+052 A+053 A+054 A+055 A+056 A+057 A+058 A+059 A+060 A+061 A+062 A+063

4x A+064 A+065 A+066 A+067 A+068 A+069 A+070 A+071 A+072 A+073 A+074 A+075 A+076 A+077 A+078 A+079

5x A+080 A+081 A+082 A+083 A+084 A+085 A+086 A+087 A+088 A+089 A+090 A+091 A+092 A+093 A+094 A+095

6x A+096 A+097 A+098 A+099 A+100 A+101 A+102 A+103 A+104 A+105 A+106 A+107 A+108 A+109 A+110 A+111

7x A+112 A+113 A+114 A+115 A+116 A+117 A+118 A+119 A+120 A+121 A+122 A+123 A+124 A+125 A+126 A+127

8x A+0128 A+0129 A+0130 A+0131 A+0132 A+0133 A+0134 A+0135 A+0136 A+0137 A+0138 A+0139 A+0140 A+0141 A+0142 A+0143

9x A+0144 A+0145 A+0146 A+0147 A+0148 A+0149 A+0150 A+0151 A+0152 A+0153 A+0154 A+0155 A+0156 A+0157 A+0158 A+0159

Ax A+0160 A+0161 A+0162 A+0163 A+0164 A+0165 A+0166 A+0167 A+0168 A+0169 A+0170 A+0171 A+0172 A+0173 A+0174 A+0175

Bx A+0176 A+0177 A+0178 A+0179 A+0180 A+0181 A+0182 A+0183 A+0184 A+0185 A+0186 A+0187 A+0188 A+0189 A+0190 A+0191

Cx A+0192 A+0193 A+0194 A+0195 A+0196 A+0197 A+0198 A+0199 A+0200 A+0201 A+0202 A+0203 A+0204 A+0205 A+0206 A+0207

Dx A+0208 A+0209 A+0210 A+0211 A+0212 A+0213 A+0214 A+0215 A+0216 A+0217 A+0218 A+0219 A+0220 A+0221 A+0222 A+0223

Ex A+0224 A+0225 A+0226 A+0227 A+0228 A+0229 A+0230 A+0231 A+0232 A+0233 A+0234 A+0235 A+0236 A+0237 A+0238 A+0239

Fx A+0240 A+0241 A+0242 A+0243 A+0244 A+0245 A+0246 A+0247 A+0248 A+0249 A+0250 A+0251 A+052 A+0253 A+0254 A+0255

Product Reference Guide 326

Digital Interface

Table 58. Scancode Set When Control Character is 00 or 01

X0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF

NULL

C+@

SOH

C(S)+A

STX

C(S)+B

ETX

C(S)+C

EOT

C+D

ENQ

C(S)+E

ACK

C(S)+F

BEL

C(S)+G

TAB

C(S)+J

C(S)+K

C(S)+L

Enter

C(S)+N

C(S)+O

DLE

C(S)+P

DC1

C(S)+Q

DC2

C(S)+R

DC3

C(S)+S

DC4

C(S)+T

NAK

C(S)+U

SYN

C(S)+V

ETB

C(S)+W

CAN

C(S)+X

C(S)+Y

SUB

C(S)+Z

ESC

Esc

C(S)+\

C+]

C(S)+^

C(S)+_

2x Space ! “ # $ % & ‘ ( ) * + , - . /

3x 0 1 2 3 4 5 6 7 8 9 : ; < = > ?

4x @ A B C D E F G H I J K L M N O

5x P Q R S T U V W X Y Z [ \ ] ^ _

6x ` a b c d e f g h i j k l m n o

7x p q r s t u v w x y z { | } ~ Del

8x Sh↓ Sh↑ Ins

Ent

(keyp)

F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11

9x F12 F13 F14 F15 F16     Cl ↓ Cl ↑

Table 59. Scancode Set When Control Character is 02

X0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF

0x Cl ↓ Cl ↑ BS Tab à S+ Tab

Enter

Keypd

Enter Ins

1x    F6 F1 F2 F3 F4 F5 ESC F7 F8 F9 F10

2x Space ! “ # $ % & ‘ ( ) * + , - . /

3x 0 1 2 3 4 5 6 7 8 9 : ; < = > ?

4x @ A B C D E F G H I J K L M N O

5x P Q R S T U V W X Y Z [ \ ] ^ _

6x ` a b c d e f g h i j k l m n o

7x p q r s t u v w x y z { | } ~ Del

327

Gryphon™ I GD44XX

GBT4400/GM440X

IBM31xx 102-key

Table 60. Scancode Set When Control Character is 00 or 01

X0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF

NULL

C+@

SOH

C(S)+A

STX

C(S)+B

ETX

C(S)+C

EOT

C+D

ENQ

C(S)+E

ACK

C(S)+F

BEL

C(S)+G

TAB

C(S)+J

C(S)+K

C(S)+L

Enter

C(S)+N

C(S)+O

DLE

C(S)+P

DC1

C(S)+Q

DC2

C(S)+R

DC3

C(S)+S

DC4

C(S)+T

NAK

C(S)+U

SYN

C(S)+V

ETB

C(S)+W

CAN

C(S)+X

C(S)+Y

SUB

C(S)+Z

ESC

Esc

C(S)+\

C+]

C(S)+^

C(S)+_

2x Space ! “ # $ % & ‘ ( ) * + , - . /

3x 0 1 2 3 4 5 6 7 8 9 : ; < = > ?

4x @ A B C D E F G H I J K L M N O

5x P Q R S T U V W X Y Z [ \ ] ^ _

6x ‘ a B c d e f g h i j k l m n o

7x p q R s t u v w x y z { | } Del

8x Sh↓ Sh↑ Ins

Ent

(keyp)

F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11

9x F12 Enter Reset Insert Delete Field - Field +

Enter

paddle

Printl Ar↓ Ar↑ Al↓ Al ↑ Cl ↓ Cl ↑ Cr ↓

Ax Cr ↑

Table 61. Scancode Set When Control Character is 02

X0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF

0x Ar↓ Ar↑ Al↓ Al ↑ Cl ↓ Cl ↑ Cr ↓ Cr ↑ BS Tab  S+ Tab

Enter

Keypd

Enter Ins Pg Up

1x Pg Dwn Home    F6 F1 F2 F3 F4 F5 ESC F7 F8 F9 F10

2x Space ! “ # $ % & ‘ ( ) * + , - . /

3x 0 1 2 3 4 5 6 7 8 9 : ; < = > ?

4x @ A B C D E F G H I J K L M N O

5x P Q R S T U V W X Y Z [ \ ] ^ _

6x ‘ a B c d e f g h i j k l m n o

7x p q R s t u v w x y z { | } Del

Product Reference Guide 328

IBM XT

Table 62. Scancode Set When Control Character is 00 or 01

X0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF

NULL

C+@

SOH

C(S)+A

STX

C(S)+B

ETX

C(S)+C

EOT

C+D

ENQ

C(S)+E

ACK

C(S)+F

BEL

C(S)+G

C(S)+H

TAB

C(S)+J

C(S)+K

C(S)+L

Enter

C(S)+N

C(S)+O

DLE

C(S)+P

DC1

C(S)+Q

DC2

C(S)+R

DC3

C(S)+S

DC4

C(S)+T

NAK

C(S)+U

SYN

C(S)+V

ETB

C(S)+W

CAN

C(S)+X

C(S)+Y

SUB

C(S)+Z

ESC

Esc

C(S)+\

C+]

C(S)+^

C(S)+_

2x Space ! “ # $ % & ‘ ( ) * + , - . /

3x 0 1 2 3 4 5 6 7 8 9 : ; < = > ?

4x @ A B C D E F G H I J K L M N O

5x P Q R S T U V W X Y Z [ \ ] ^ _

6x ‘ a B c d e f g h i j k l m n o

7x p q R s t u v w x y z { | } Del

8x Sh↓ Sh↑ Ins

Ent

(keyp)

F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11

9x F12 Home End Pg Up Pg Dwn     Ar↓ Ar↑ Al↓ Al ↑ Cl ↓ Cl ↑ Cr ↓

Ax Cr ↑

Table 63. Scancode Set when Control Character 02

X0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF

0x Ar↓ Ar↑ Al↓ Al ↑ Cl ↓ Cl ↑ Cr ↓ Cr ↑ BS Tab  S+ Tab

Enter

Keypd

Enter Ins Pg Up

1x Pg Dwn Home    F6 F1 F2 F3 F4 F5 ESC F7 F8 F9 F10

2x Space ! “ # $ % & ‘ ( ) * + , - . /

3x 0 1 2 3 4 5 6 7 8 9 : ; < = > ?

4x @ A B C D E F G H I J K L M N O

5x P Q R S T U V W X Y Z [ \ ] ^ _

6x ‘ a B c d e f g h i j k l m n o

7x p q R s t u v w x y z { | } Del

Product Reference Guide

329

Microsoft Windows Codepage 1252

Windows-1252 is a character encoding of the Latin alphabet, used by default in the

legacy components of Microsoft Windows in English and some other Western

languages.

330

Gryphon™ I GD44XX

GBT4400/GM440X

NOTES

ASCII Chart

ASCII

Char.

Hex No.

ASCII

Char.

Hex No.

ASCII

Char.

Hex No.

ASCII

Char.

Hex

No.

NUL

SOH

STX

ETX

EOT

ENQ

ACK

BEL

DLE

DC1

DC2

DC3

DC4

NAK

SYN

ETB

CAN

SUB

ESC

“

’

(

)

;

[

]

‘

{

}

DEL

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Datalogic Gryphon I GM4400 2D in the language / languages: English as an attachment in your email.

The manual is 11,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Datalogic Gryphon I GM4400 2D Manual

Product: