535637

Datalogic Gryphon I GFS4100 Manual

251
Zoom out
Zoom in
Previous page
1/294
Next page
Data Editing
Product Reference Guide
249
4. Scan the barcode: "Select No Read String."
5. Scan the hex equivalent characters from the
keypad in Appendix D that represent the
desired character string in step 1 above.
6. If less than the expected string of 20 characters is selected, scan
the ENTER/EXIT bar-
code to terminate the string.
7. Scan the ENTER/EXIT PROGRAMMING MODE
barcode once again to exit Program-
ming Mode.
This completes the procedure.
Code Verifier
Code Verifier is available in On Line or Serial On Line and Automatic modes only. A
programmable character or string is transmitted after a successful reading phase depending on
the result of a comparison between the decoded label and a user specified label.
Code Verifier Mode
Options for this feature are:
• Disable: disable the Code Verifier functionality
• Transmit Wrong String: the reader will transmit the wrong string to the Host.
• Transmit Wrong Code: the reader wll transmit the wrong code to the Host.
If the code read matches the code verifier Match String then it is sent
to the host through the
configured port. If it does not match the code verifier Match String, either the Wrong Code can
be sent or the defined Wrong String message can be sent indicating the error.
Match String
The string used as the match code for code verification. The Match String must be configured
to include start/stop characters and check digits, if their transmission is enabled.
It is possible to define the Match string
by inserting:
• any printable characters
• non-printable ASCII characters available in the list insid
e the parameter edit box
No wild card characters are supported.
To set this feature:
1. Determine the desired character string (max 32).
2. Reference the ASCII Chart on the inside back cover of this manual to find the hex value
assigned t
o the desired character.
3. Go to Match String on page 53 and scan ENTER/EXIT PROGRAMMING MODE to
enter Programming Mode.
4. Scan the barcode: SELECT MATCH STRING.
5. Turn to Appendix D, Keypad and scan the barcodes representing the hex characters deter-
mined in step 1 above.
6. If less than the expected string of 32 characters
are selected, scan the ENTER/EXIT bar-
code to terminate the string.
… 251 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Datalogic Gryphon I GFS4100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Datalogic Gryphon I GFS4100 in the language / languages: English as an attachment in your email.

The manual is 14,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info