Manual Datalogic Gryphon I GFS4100 (page 71 of 294) (English)

535637

Zoom out

Zoom in

1/294

ENTER/EXIT PROGRAMMING MODE Good Read LED Duration

Product Reference Guide

Good Read LED Duration

This feature specifies the amount of time that the Good Read LED remains on following a good

read. The good read LED on time can be set within a range of 100 milliseconds to 25,500

milliseconds (0.1 to 25.5 seconds) in 100ms increments.

See page 251 in “References” for detailed instructions an

d examples for setting this feature.

Select Good Read LED Duration Setting

To configure this feature scan the ENTER/EXIT PROGRAMMING

MODE barc

ode above, then the barcode at left, followed by

the digits (in hex) from the Alphanumeric characters in

Appendix D, Keypad

representing your desired character(s).

End by scanning the ENTER/EXIT bar

code again.

Make a mistake? Scan the CANCEL barcode to abort and not

sav

e the entry string. You can then start again at the begin-

ning.

CANCEL

DEFAULT

001 = Good Read LED

stays on for 100 ms.

All LED indicators are off during sleep.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Datalogic Gryphon I GFS4100 in the language / languages: English as an attachment in your email.

The manual is 14,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Datalogic Gryphon I GFS4100 Manual

Product: