Manual Datalogic Gryphon I GFE4400 2D (page 22 of 36) (English)

535578

Zoom out

Zoom in

1/36

Mounting the Scanner

18 Gryphon™ GFE4400

ESD Protection

The host enclosure design must provide adequate ESD protection for the

scanner. Ideally, static discharge should not be allowed contact with the

scanner. The preferred method to prevent static discharge is to provide a

long discharge path to all circuits. The scanner is intended to be mounted

inside a host enclosure. Only the front surface should be exposed in order

to read bar codes. This is to protect the rear interface connector area,

which can be susceptible to static discharge. Interface cables should also

not have power applied when inserted into the scanner. Any metal

mounting surfaces for the scanner must be electrically grounded with

proper insulation to the scan engine mounting.

Static discharge (ESD) testing is recommended for the entire system inte-

gration to ensure proper ESD protection.

ESD

Proper ESD protection should be used at the time of instal-

lation and servicing of the scanner or the host equipment.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Datalogic Gryphon I GFE4400 2D in the language / languages: English as an attachment in your email.

The manual is 2,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Datalogic Gryphon I GFE4400 2D Manual

Product: