Manual Datalogic BC9xx0-BT (page 26 of 32) (English)

535567

Zoom out

Zoom in

1/32

Datalogic ADC Limited Factory Warranty

22 BC 9xx0-BT Cradle

Datalogic ADC Limited Factory Warranty

Warranty Coverage

Datalogic warranties this product against defects in workmanship and materials, for a period

of 3 years from the date of shipment, provided that the product is operated under normal and

proper conditions. Datalogic (“Datalogic”) hardware products are warranted against defects

in material and workmanship under normal and proper use. The liability of Datalogic under

this warranty is limited to furnishing the labor and parts necessary to remedy any defect

covered by this warranty and restore the product to its normal operating condition. Repair or

replacement of product during the warranty does not extend the original warranty term.

Products are sold on the basis of specifications applicable at the time of manufacture and

Datalogic has no obligation to modify or update products once sold.

If Datalogic determines that a product has defects in material or workmanship, Datalogic

shall, at its sole option repair or replace the product without additional charge for parts and

labor, or credit or refund the defective products duly returned to Datalogic. To perform re-

pairs, Datalogic may use new or reconditioned parts, components, subassemblies or prod-

ucts that have been tested as meeting applicable specifications for equivalent new material

and products. Customer will allow Datalogic to scrap all parts removed from the repaired

product. The warranty period shall extend from the date of shipment from Datalogic for the

duration published by Datalogic for the product at the time of purchase (Warranty period).

Datalogic warrants repaired hardware devices against defects in workmanship and materi-

als on the repaired assembly for a 90 day period starting from the date of shipment of the

repaired product from Datalogic or until the expiration of the original warranty period, which-

ever is longer. Datalogic does not guarantee, and it is not responsible for, the maintenance

of, damage to, or loss of configurations, data, and applications on the repaired units and at

its sole discretion can return the units in the “factory default” configuration or with any soft-

ware or firmware update available at the time of the repair (other than the firmware or soft-

ware installed during the manufacture of the product). Customer accepts responsibility to

maintain a back up copy of its software and data.

Warranty Claims Process

In order to obtain service under the Factory Warranty, Customer must notify Datalogic of the

claimed defect before the expiration of the applicable Warranty period and obtain from Dat-

alogic a return authorization number (RMA) for return of the product to a designated Data-

logic service center. If Datalogic determines Customer’s claim is valid, Datalogic will repair or

replace product without additional charge for parts and labor. Customer shall be responsible

for packaging and shipping the product to the designated Datalogic service center, with ship-

ping charges prepaid. Datalogic shall pay for the return of the product to Customer if the

shipment is to a location within the country in which the Datalogic service center is located.

Customer shall be responsible for paying all shipping charges, duties, taxes, and any other

charges for products returned to any other locations. Failure to follow the applicable RMA

policy, may result in a processing fee. Customer shall be responsible for return shipment ex-

penses for products which Datalogic, at its sole discretion, determines are not defective or

eligible for warranty repair.

Warranty Exclusions

The Datalogic Factory Warranty shall not apply to:

(i) any product which has been damaged, modified, altered, repaired or upgraded by

other than Datalogic service personnel or its authorized representatives;

(ii) any claimed defect, failure or damage which Datalogic determines was caused by

faulty operations, improper use, abuse, misuse, wear and tear, negligence, improper

storage or use of parts or accessories not approved or supplied by Datalogic;

(iii) any claimed defect or damage caused by the use of product with any other instru-

ment, equipment or apparatus;

(iv) any claimed defect or damage caused by the failure to provide proper maintenance,

including but not limited to cleaning the upper window in accordance with product

manual;

(v) any defect or damage caused by natural or man-made disaster such as but not lim-

ited to fire, water damage, floods, other natural disasters, vandalism or abusive

events that would cause internal and external component damage or destruction of

the whole unit, consumable items;

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Datalogic BC9xx0-BT in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Datalogic BC9xx0-BT Manual

Product: