535567
12
Zoom out
Zoom in
Previous page
1/32
Next page
BC9xx0-BT Configuration
8 BC 9xx0-BT Cradle
BC9xx0-BT Configuration
The BC9xx0-BT configuration can be performed in three ways: by using the
Datalogic Aladdin
software configuration program, by sending configuration
strings from the Host PC via the RS-232 or USB-COM interface or by reading
configuration bar codes with the PowerScan
BT9500 reader.
Datalogic Aladdin™
Datalogic Aladdin
is a multi-platform utility program that provides a quick
and user-friendly configuration method via the RS-232/USB-COM interface.
It also allows upgrading the software of the connected device (see the Data-
logic Aladdin
Help On-Line for more details).
Serial Configuration
By connecting the BC9xx0-BT to a PC through an RS-232 or USB-COM inter-
face cable it is possible to send configuration strings from the PC to BC9xx0-
BT.
Configuration Bar Codes
Link the cradle and the reader using the procedures described in the Power-
Scan
BT9500 Quick Reference. Once the pairing is complete, you can config-
ure the BC9xx0-BT cradle by reading configuration bar codes in this manual.
To configure the BC9xx0-BT using the PowerScan
BT9500 reader (paired to
the cradle with the Bind command), follow the procedure according to the
interface selected.
Resetting Standard Product Defaults
Reference the PRG for a listing of standard factory settings. If you aren’t sure
what programming options are in your reader, or you’ve changed some
options and want the factory settings restored, scan the
Standard Product
Default Settings
bar code below to copy the factory configuration for the cur-
rently active interface to the current configuration.
Factory defaults are based on the interface type. Configure the reader
for the correct interface before scanning this label.
CAUTION
Scanning this bar code will RESET all settings for the PowerScan
BT9500. Any customized settings that may have been applied to the
reader will be lost.
Standard Product Default Settings
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Datalogic BC9xx0-BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Datalogic BC9xx0-BT in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info