Manual DAP Audio Palladium Vintage P1200 (page 9 of 14) (English)

613030

Zoom out

Zoom in

1/14

Stereo Operation

For stereo (dual channel) operation, set the mode select switch to the “Stereo” position. In this mode both

channels operate independently of each other, with their input attenuates controlling their respective levels.

A signal at Channel A’s input produces an amplified signal at Channel A’s output, while a signal at Channel

B’s input produces an amplified signal at Channel B’s output

Bridged Mono Operation

Both amplifier channels can be bridged together to make a very powerful single channel amplifier. When the

Mode switch is set to the “Bridge” position, 1 channel “pushes”, while the other “pulls” equally. Thus

effectively doubling the power. Use extreme caution when operating the amplifier in the bridged mode.

To bridge the amplifier, set the mode switch to the “Bridge” position. Apply the signal to Channel A’s input

and connect the speakers across the “hot” outputs – the red binding posts – of Channel A and B.

Channel B’s “hot” output is in phase with the input.

For operation adjust only the Channel A’s input attenuator, while Channel B’s input will not function

(Channel B’s input signal has been disconnected).

Never connect a „hot“-Output to ground or to other „hot“-Outputs!

Bridging Precautions

Never ground either side of the speaker cable when the amplifier is in bridged mode; Both sides are „hot“.

If an output patch panel is used, all terminals must be isolated from each other and from the ground.

Why do the components heat up when I on the amplifier Submitted on 16-4-2023 at 01:19
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DAP Audio Palladium Vintage P1200 in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DAP Audio Palladium Vintage P1200 Manual

Product: