654612

Danfoss TPOne-RF Manual

14
Zoom out
Zoom in
Previous page
1/28
Next page
14
TPOne-RF
User Menu
Click & Save Click & Save is an easy access saving function.
Switching Click & Save ON will reduce the user set
comfort temperatures by 1°C. Switching Click &
Save OFF will return TPOne to the user set comfort
temperatures.
Default setting: O
Note: Independent tests have proven that a
reduction in home heating temperatures by 1oC
can save on average 10% energy.
Heating
Mode
Heating Mode will change the TPOne from a
thermostat with full user set heating schedule to a
manually set temperature only thermostat.
In schedule mode the thermostat will follow the
user set heating schedule.
In manual mode the user set schedule will be
ignored, the required comfort mode is then
chosen manually
Default setting: Scheduled
Schedule User set heating schedule option:
Heating - settings for the daily heating schedule.
Choose weekday, weekend or independent daily
options and 1,2 or 3 periods per day.
Option to reset daily heating schedule to factory
defaults.
Summary - graphical overview of the set daily
heating or hot water schedule
Default settings: see default heating times later
in this guide
… 14 …


Need help? Post your question in this forum.

Forumrules
1

Forum

danfoss-tpone-rf

Reset search

  • Where is the battery in the TPOne-RF? How do you change it?. Why are there no simple instructions to users in your over-complicated manual Submitted on 2-11-2022 at 11:03

    Reply Report abuse

  • I Have a TP One RF. I have scheduled 2 heating periods, it says it has saved my settings but the heating does not come on at the times I have set. I chose weekdays. I can control the heating manually with no problems. Just won't come on at scheduled times. Submitted on 28-10-2020 at 22:28

    Reply Report abuse

  • Battery Low is displayed on my Danfoss TPOne-RF Thermostat. How do I change the battery and what battery is needed? Thanks Submitted on 4-9-2020 at 14:05

    Reply Report abuse

  • My wired in thermostat is only showing the battery icon and no others will appear.My receiver will only show the ch light when I press both buttons. Why? What should I do? Submitted on 15-3-2020 at 10:22

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Danfoss TPOne-RF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Danfoss TPOne-RF in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info