654612

Danfoss TPOne-RF Manual

9
Zoom out
Zoom in
Previous page
1/28
Next page
Danfoss Heating
9
Button
Lock
Indicates that Button Lock has been activated to
avoid unintentional setting changes. To activate
buttons while button lock is active press the OK
button for 5 seconds. The Button Lock setting is
found in the Installer Menu.
Battery
Low
The battery low icon indicates when the TPOne
batteries should be changed. To avoid loss of
heating or damage to your thermostat replace
batteries when this icon is displayed.
Heat
Calling
When the current room temperature is below the
required room set temperature the TPOne will call
for heating from the connected heat source. This is
indicated by the Heat Calling icon.
The TPOne-RF is connected by radio signal to a
receiver. The Radio Frequency icon will be displayed
to conrm that this connection is active and that the
TPOne-RF is controlling the heating.
If connection is lost the icon will go o and a warning
will be shown at the top of the display.
Important Note: Ensure that there are no large metal
objects, such as boiler cases, other large appliances
or mirrors in line of sight between the transmitter
and receiver as these will prevent communication
between the TPOne-RF and receiver.
Display
Info & Settings Status Icons
Dates &
Warnings
21
.5
°
16:35 Mon
NOTE:
TPOne monitors several conditions and will provide warning or
information messages when necessary. Details on these can be
found on pages 24 - 26.
… 9 …


Need help? Post your question in this forum.

Forumrules
1

Forum

danfoss-tpone-rf

Reset search

  • Where is the battery in the TPOne-RF? How do you change it?. Why are there no simple instructions to users in your over-complicated manual Submitted on 2-11-2022 at 11:03

    Reply Report abuse

  • I Have a TP One RF. I have scheduled 2 heating periods, it says it has saved my settings but the heating does not come on at the times I have set. I chose weekdays. I can control the heating manually with no problems. Just won't come on at scheduled times. Submitted on 28-10-2020 at 22:28

    Reply Report abuse

  • Battery Low is displayed on my Danfoss TPOne-RF Thermostat. How do I change the battery and what battery is needed? Thanks Submitted on 4-9-2020 at 14:05

    Reply Report abuse

  • My wired in thermostat is only showing the battery icon and no others will appear.My receiver will only show the ch light when I press both buttons. Why? What should I do? Submitted on 15-3-2020 at 10:22

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Danfoss TPOne-RF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Danfoss TPOne-RF in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info