Manual Danfoss TPOne-RF (page 3 of 28) (English)

654612

3

Zoom out

Zoom in

Previous page

1/28

Next page

Danfoss Heating

3

Installation Instructions

ErP Class

The products represented within this document are classied according

to, and allow completion of, the Energy Related Product (ErP) Directive

System Package che and the ErP system data label. ErP Labelling

obligation is applicable from 26th September 2015.

ERP Class Product Function and ErP Description

Additional

eﬃciency

gain

IV

TPI Room Thermostat, for use with on/oﬀ

output heaters

An electronic room thermostat that controls

both thermostat cycle rate and in-cycle on/

o ratio of the heater proportional to room

temperature. TPI control strategy reduces

mean water temperature, improves room

temperature control accuracy and enhances

system eciency.

2%

ErP

4

Product

Class

Specications TPOne-RF RX1-S

Operating Voltage

2.5 - 3VDC

(2x AA batteries)

230Vac, 50/60Hz

Output relay - Volt Free

Setting temperature range 5-35°C -

Operating temprature range 0-45°C

Switch rating - 3A (1) at 230Vac

Switch type - 1 x SPDT Type 1B

Battery lifetime Min. 2 years

IP rating IP20 IP40

On/o control Yes -

Chrono-proportional control Yes -

Operating mode Heating -

Construction EN 60730-2-9 EN 60730-1

Control pollution situation Degree 2

Rated impulse voltage - 2.5kV

Ball pressure test 75°C

Dimensions (mm) H67 x W154 x D30 H84 x W84 x D28

Software Classication A

Important note RF products: Ensure that there are no large metal objects,

such as boiler cases or other large appliances, in line of sight between the

transmitter and receiver as these will prevent communication between

thermostat and receiver.

1

Where is the battery in the TPOne-RF? How do you change it?. Why are there no simple instructions to users in your over-complicated manual Submitted on 2-11-2022 at 11:03
Reply Report abuse
I Have a TP One RF. I have scheduled 2 heating periods, it says it has saved my settings but the heating does not come on at the times I have set. I chose weekdays. I can control the heating manually with no problems. Just won't come on at scheduled times. Submitted on 28-10-2020 at 22:28
Reply Report abuse
Battery Low is displayed on my Danfoss TPOne-RF Thermostat. How do I change the battery and what battery is needed? Thanks Submitted on 4-9-2020 at 14:05
Reply Report abuse
My wired in thermostat is only showing the battery icon and no others will appear.My receiver will only show the ch light when I press both buttons. Why? What should I do? Submitted on 15-3-2020 at 10:22
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Danfoss TPOne-RF at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Danfoss TPOne-RF in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info